Squid configuration directive clientside_mark

Available in: v4   3.5   3.4   3.3   3.2  

This directive is not available in the v6 version of Squid.

This directive is not available in the v5 version of Squid.

For older versions than 3.5 see the linked pages above

Configuration Details:

Option Name:clientside_mark
Replaces:
Requires:Packet MARK (Linux)
Default Value:none
Suggested Config:

	Allows you to apply a Netfilter mark value to packets being transmitted
	on the client-side, based on an ACL.

	clientside_mark mark-value [!]aclname ...

	Example where normal_service_net uses the mark value 0x00
	and good_service_net uses 0x20

	acl normal_service_net src 10.0.0.0/24
	acl good_service_net src 10.0.1.0/24
	clientside_mark 0x00 normal_service_net
	clientside_mark 0x20 good_service_net

	Note: This feature is incompatible with qos_flows. Any mark values set here
	will be overwritten by mark values in qos_flows.

	This clause only supports fast acl types.
	See http://wiki.squid-cache.org/SquidFaq/SquidAcl for details.

 

Back

 

Introduction

Documentation

Support

Miscellaneous

Web Site Translations

Mirrors