Squid configuration directive response_delay_pool

Available in: v6   v5  

This directive is not available in the v4 version of Squid.

This directive is not available in the 3.5 version of Squid.

For older versions than 3.5 see the linked pages above

Configuration Details:

Option Name:response_delay_pool
Replaces:
Requires:--enable-delay-pools
Default Value:none
Suggested Config:

	This option configures client response bandwidth limits using the
	following format:

	response_delay_pool name [option=value] ...

	name	the response delay pool name

	available options:

		individual-restore	The speed limit of an individual
					bucket(bytes/s). To be used in conjunction
					with 'individual-maximum'.

		individual-maximum	The maximum number of bytes which can
					be placed into the individual bucket. To be used
					in conjunction with 'individual-restore'.

		aggregate-restore	The speed limit for the aggregate
					bucket(bytes/s). To be used in conjunction with
					'aggregate-maximum'.

		aggregate-maximum	The maximum number of bytes which can
	   				be placed into the aggregate bucket. To be used
					in conjunction with 'aggregate-restore'.

		initial-bucket-level	The initial bucket size as a percentage
					of individual-maximum.

	Individual and(or) aggregate bucket options may not be specified,
   	meaning no individual and(or) aggregate speed limitation.
	See also response_delay_pool_access and delay_parameters for
	terminology details.

 

Back

 

Introduction

Documentation

Support

Miscellaneous

Web Site Translations

Mirrors