Squid configuration directive snmp_port

Available in: 4   3.5   3.4   3.3   3.2   2.7   3.1   3.0   2.6  

For older versions than 3.3 see the linked pages above

Configuration Details:

Option Name:snmp_port
Replaces:
Requires:--enable-snmp
Default Value:SNMP disabled.
Suggested Config:

	The port number where Squid listens for SNMP requests. To enable
	SNMP support set this to a suitable port number. Port number
	3401 is often used for the Squid SNMP agent. By default it's
	set to "0" (disabled)

	Example:
		snmp_port 3401

 

Back

 

Introduction

Documentation

Support

Miscellaneous

Web Site Translations

Mirrors