Re: Problem compiling on HP-UX 11i (32 Bit).

Ok.. The HP-UX make defenitely seems to be a bit odd, buggy even.

Can you please ruin the following small test to verify that I have understood
the nature of the problem correct:

---- cut here ------
TESTVAR1 = \

TESTVAR2 = Hello

TESTVAR3 = \
        There

all:
        @echo "The next line should read 'Hello There'"
        @echo $(TESTVAR1) $(TESTVAR2) $(TESTVAR3)
---- end of snippet -----

Create a new directory and save the above as Makefile, then run make.

Regards
Henrik

On Friday 04 January 2002 08.15, Young, Jason wrote:
> Henrik,
>
> Thanks for the help. I downloaded the 2.5 release as suggested and tried
> the recompile again. It stops with different error this time when you run
> the "make all". The output from the command was as attached.
>
> Any further ideas?
>
> Regards
>
> Jason Young
>
> ####### Output Below #######
>
> bneweb2:/data1/source/squid/squid-2.5.PRE2# make all
> No suffix list.
> Making all in lib
> source='Array.c' object='Array.o' libtool=no \
> depfile='.deps/Array.Po' tmpdepfile='.deps/Array.TPo' \
> depmode=hp /bin/sh ../cfgaux/depcomp \
> cc -Ae -DHAVE_CONFIG_H -I. -I. -I../include -g -c `test -f
> Array.c || echo './'`Array.c
> source='base64.c' object='base64.o' libtool=no \
> depfile='.deps/base64.Po' tmpdepfile='.deps/base64.TPo' \
> depmode=hp /bin/sh ../cfgaux/depcomp \
> cc -Ae -DHAVE_CONFIG_H -I. -I. -I../include -g -c `test -f
> base64.c || echo './'`base64.c
> source='getfullhostname.c' object='getfullhostname.o' libtool=no \
> depfile='.deps/getfullhostname.Po'
> tmpdepfile='.deps/getfullhostname.TPo' \
> depmode=hp /bin/sh ../cfgaux/depcomp \
> cc -Ae -DHAVE_CONFIG_H -I. -I. -I../include -g -c `test -f
> getfullhostname.c || echo './'`getfullhostname.c
> source='hash.c' object='hash.o' libtool=no \
> depfile='.deps/hash.Po' tmpdepfile='.deps/hash.TPo' \
> depmode=hp /bin/sh ../cfgaux/depcomp \
> cc -Ae -DHAVE_CONFIG_H -I. -I. -I../include -g -c `test -f
> hash.c || echo './'`hash.c
> source='heap.c' object='heap.o' libtool=no \
> depfile='.deps/heap.Po' tmpdepfile='.deps/heap.TPo' \
> depmode=hp /bin/sh ../cfgaux/depcomp \
> cc -Ae -DHAVE_CONFIG_H -I. -I. -I../include -g -c `test -f
> heap.c || echo './'`heap.c
> source='html_quote.c' object='html_quote.o' libtool=no \
> depfile='.deps/html_quote.Po' tmpdepfile='.deps/html_quote.TPo' \
> depmode=hp /bin/sh ../cfgaux/depcomp \
> cc -Ae -DHAVE_CONFIG_H -I. -I. -I../include -g -c `test -f
> html_quote.c || echo './'`html_quote.c
> source='iso3307.c' object='iso3307.o' libtool=no \
> depfile='.deps/iso3307.Po' tmpdepfile='.deps/iso3307.TPo' \
> depmode=hp /bin/sh ../cfgaux/depcomp \
> cc -Ae -DHAVE_CONFIG_H -I. -I. -I../include -g -c `test -f
> iso3307.c || echo './'`iso3307.c
> source='md5.c' object='md5.o' libtool=no \
> depfile='.deps/md5.Po' tmpdepfile='.deps/md5.TPo' \
> depmode=hp /bin/sh ../cfgaux/depcomp \
> cc -Ae -DHAVE_CONFIG_H -I. -I. -I../include -g -c `test -f
> md5.c || echo './'`md5.c
> source='radix.c' object='radix.o' libtool=no \
> depfile='.deps/radix.Po' tmpdepfile='.deps/radix.TPo' \
> depmode=hp /bin/sh ../cfgaux/depcomp \
> cc -Ae -DHAVE_CONFIG_H -I. -I. -I../include -g -c `test -f
> radix.c || echo './'`radix.c
> source='rfc1035.c' object='rfc1035.o' libtool=no \
> depfile='.deps/rfc1035.Po' tmpdepfile='.deps/rfc1035.TPo' \
> depmode=hp /bin/sh ../cfgaux/depcomp \
> cc -Ae -DHAVE_CONFIG_H -I. -I. -I../include -g -c `test -f
> rfc1035.c || echo './'`rfc1035.c
> source='rfc1123.c' object='rfc1123.o' libtool=no \
> depfile='.deps/rfc1123.Po' tmpdepfile='.deps/rfc1123.TPo' \
> depmode=hp /bin/sh ../cfgaux/depcomp \
> cc -Ae -DHAVE_CONFIG_H -I. -I. -I../include -g -c `test -f
> rfc1123.c || echo './'`rfc1123.c
> source='rfc1738.c' object='rfc1738.o' libtool=no \
> depfile='.deps/rfc1738.Po' tmpdepfile='.deps/rfc1738.TPo' \
> depmode=hp /bin/sh ../cfgaux/depcomp \
> cc -Ae -DHAVE_CONFIG_H -I. -I. -I../include -g -c `test -f
> rfc1738.c || echo './'`rfc1738.c
> source='rfc2617.c' object='rfc2617.o' libtool=no \
> depfile='.deps/rfc2617.Po' tmpdepfile='.deps/rfc2617.TPo' \
> depmode=hp /bin/sh ../cfgaux/depcomp \
> cc -Ae -DHAVE_CONFIG_H -I. -I. -I../include -g -c `test -f
> rfc2617.c || echo './'`rfc2617.c
> source='safe_inet_addr.c' object='safe_inet_addr.o' libtool=no \
> depfile='.deps/safe_inet_addr.Po'
> tmpdepfile='.deps/safe_inet_addr.TPo' \
> depmode=hp /bin/sh ../cfgaux/depcomp \
> cc -Ae -DHAVE_CONFIG_H -I. -I. -I../include -g -c `test -f
> safe_inet_addr.c || echo './'`safe_inet_addr.c
> source='splay.c' object='splay.o' libtool=no \
> depfile='.deps/splay.Po' tmpdepfile='.deps/splay.TPo' \
> depmode=hp /bin/sh ../cfgaux/depcomp \
> cc -Ae -DHAVE_CONFIG_H -I. -I. -I../include -g -c `test -f
> splay.c || echo './'`splay.c
> source='Stack.c' object='Stack.o' libtool=no \
> depfile='.deps/Stack.Po' tmpdepfile='.deps/Stack.TPo' \
> depmode=hp /bin/sh ../cfgaux/depcomp \
> cc -Ae -DHAVE_CONFIG_H -I. -I. -I../include -g -c `test -f
> Stack.c || echo './'`Stack.c
> source='stub_memaccount.c' object='stub_memaccount.o' libtool=no \
> depfile='.deps/stub_memaccount.Po'
> tmpdepfile='.deps/stub_memaccount.TPo' \
> depmode=hp /bin/sh ../cfgaux/depcomp \
> cc -Ae -DHAVE_CONFIG_H -I. -I. -I../include -g -c `test -f
> stub_memaccount.c || echo './'`stub_memaccount.c
> source='util.c' object='util.o' libtool=no \
> depfile='.deps/util.Po' tmpdepfile='.deps/util.TPo' \
> depmode=hp /bin/sh ../cfgaux/depcomp \
> cc -Ae -DHAVE_CONFIG_H -I. -I. -I../include -g -c `test -f
> util.c || echo './'`util.c
> cc: "util.c", line 754: warning 562: Redeclaration of
> "default_failure_notify" with a different storage class specifier:
> "default_failure_notify" will have internal linkage.
> source='uudecode.c' object='uudecode.o' libtool=no \
> depfile='.deps/uudecode.Po' tmpdepfile='.deps/uudecode.TPo' \
> depmode=hp /bin/sh ../cfgaux/depcomp \
> cc -Ae -DHAVE_CONFIG_H -I. -I. -I../include -g -c `test -f
> uudecode.c || echo './'`uudecode.c
> rm -f libmiscutil.a
> ar cru libmiscutil.a Array.o base64.o getfullhostname.o hash.o
> heap.o html_quote.o iso3307.o md5.o radix.o rfc1035.o rfc1123.o
> rfc1738.o rfc2617.o safe_inet_addr.o splay.o Stack.o stub_memaccount.o
> util.o uudecode.o # ../include/version.h should be a dependency
>
> : libmiscutil.a
>
> source='ntlmauth.c' object='ntlmauth.o' libtool=no \
> depfile='.deps/ntlmauth.Po' tmpdepfile='.deps/ntlmauth.TPo' \
> depmode=hp /bin/sh ../cfgaux/depcomp \
> cc -Ae -DHAVE_CONFIG_H -I. -I. -I../include -g -c `test -f
> ntlmauth.c || echo './'`ntlmauth.c
> rm -f libntlmauth.a
> ar cru libntlmauth.a ntlmauth.o INCLUDES = -I../include
> -I../include ar: No such file or directory
> ar: could not open INCLUDES
> ar: No such file or directory
> ar: could not open =
> ar: No such file or directory
> ar: could not open -I../include
> ar: No such file or directory
> ar: could not open -I../include
> *** Error exit code 4
>
> Stop.
> *** Error exit code 1
>
> Stop.
>
> -----Original Message-----
> From: Henrik Nordstrom [mailto:hno@squid-cache.org]
> Sent: Friday, 4 January 2002 1:26 PM
> To: Young, Jason; 'squid-bugs@squid-cache.org'
> Subject: Re: Problem compiling on HP-UX 11i (32 Bit).
>
>
> Can you please try the Squid-2.5.PRE2 pre-release? The makefiles have been
> considerably restructured to increase portability and flexibility in
> Squid-2.5.
>
>
> If you can not, Squid-2.4 should build fine on HP-UX using GNU make, but it
> would be of great help if you tried the 2.5.PRE2 version and reported any
> success or failure in building that release to squid-dev@squid-cache.org.
>
> Regards
> Henrik
>
> On Friday 04 January 2002 01.28, Young, Jason wrote:
> > Hi,
> >
> > I am trying to compile squid on our HP-UX 11.11 (11i) system. The box is
> > running the 32bit version of the OS. I have downloaded the latest
> > version of squid2.4 from the web site, the "configure" command seems to
> > run ok but when I run the "make all" command I get a syntax error on line
> > 228. The system is a full copy of 11.11 Enterprise and I have also load
> > the full HP ANSI-C Compiler onto the box.
> >
> > Any ideas as to why it does not compile?
> >
> > Regards
> >
> > Jason Young
> >
> > ===================================================================
> >
> > bneweb2:/data1/source/squid/squid-2.4# make all
> > Making all in lib...
> > cc -Ae -g -I../include -I../include -c rfc1123.c
> > cc -Ae -g -I../include -I../include -c rfc1738.c
> > cc -Ae -g -I../include -I../include -c rfc1035.c
> > cc -Ae -g -I../include -I../include -c util.c
> > cc: "util.c", line 751: warning 562: Redeclaration of
> > "default_failure_notify" with a different storage class specifier:
> > "default_failure_notify" will have internal linkage.
> > cc -Ae -g -I../include -I../include -c getfullhostname.c
> > cc -Ae -g -I../include -I../include -c base64.c
> > cc -Ae -g -I../include -I../include -c uudecode.c
> > cc -Ae -g -I../include -I../include -c splay.c
> > cc -Ae -g -I../include -I../include -c safe_inet_addr.c
> > cc -Ae -g -I../include -I../include -c iso3307.c
> > cc -Ae -g -I../include -I../include -c snprintf.c
> > cc -Ae -g -I../include -I../include -c md5.c
> > cc -Ae -g -I../include -I../include -c radix.c
> > cc -Ae -g -I../include -I../include -c stub_memaccount.c
> > cc -Ae -g -I../include -I../include -c Array.c
> > cc -Ae -g -I../include -I../include -c Stack.c
> > cc -Ae -g -I../include -I../include -c hash.c
> > cc -Ae -g -I../include -I../include -c heap.c
> > cc -Ae -g -I../include -I../include -c html_quote.c
> > /usr/bin/rm -f libmiscutil.a
> > /usr/bin/ar r libmiscutil.a rfc1123.o rfc1738.o rfc1035.o
>
> util.o
>
> > getfullhostname.o base64.o uudecode.o splay.o safe_inet_addr.o
> > iso3307.o snprintf.o md5.o radix.o stub_memaccount.o Array.o
> > Stack.o hash.o heap.o html_quote.o
> > ar: creating libmiscutil.a
> >
> > : libmiscutil.a
> >
> > Making all in scripts...
> > Making all in src...
> > Make: line 228: syntax error. Stop.
> > *** Error exit code 1
> >
> > Stop.
> >
> > ===================================================================
> >
> > The Configure command completes without and errors :
> >
> > ===================================================================
> >
> > bneweb2:/data1/source/squid/squid-2.4# ./configure --prefix=/data1/squid
> > creating cache ./config.cache
> > checking host system type... hppa1.1-hp-hpux11.11
> > checking for gcc... no
> > checking for cc... cc
> > checking whether the C compiler (cc -g) works... yes
> > checking whether the C compiler (cc -g) is a cross-compiler... no
> > checking whether we are using GNU C... no
> > checking whether cc accepts -g... yes
> > Store modules built: ufs
> > Removal policies built: lru
> > unlinkd enabled
> > adding '-Ae' to cc args for hppa1.1-hp-hpux11.11
> > checking how to run the C preprocessor... cc -Ae -E
> > checking for a BSD compatible install... /opt/imake/bin/install -c
> > checking for ranlib... ranlib
> > checking whether ln -s works... yes
> > checking for sh... /usr/bin/sh
> > checking for false... /usr/bin/false
> > checking for true... /usr/bin/true
> > checking for rm... /usr/bin/rm
> > checking for mv... /usr/bin/mv
> > checking for mkdir... /usr/bin/mkdir
> > checking for ln... /usr/bin/ln
> > checking for perl... /usr/contrib/bin/perl
> > checking for makedepend... /opt/imake/bin/makedepend
> > checking for ar... /usr/bin/ar
> > Disabling 'ranlib' for HP-UX...
> > checking for dirent.h that defines DIR... yes
> > checking for opendir in -ldir... no
> > checking for ANSI C header files... yes
> > checking for arpa/inet.h... yes
> > checking for arpa/nameser.h... yes
> > checking for assert.h... yes
> > checking for bstring.h... no
> > checking for config.h... no
> > checking for crypt.h... yes
> > checking for ctype.h... yes
> > checking for errno.h... yes
> > checking for execinfo.h... no
> > checking for fcntl.h... yes
> > checking for getopt.h... no
> > checking for gnumalloc.h... no
> > checking for grp.h... yes
> > checking for ip_compat.h... no
> > checking for ip_fil_compat.h... no
> > checking for ip_fil.h... no
> > checking for ip_nat.h... no
> > checking for libc.h... no
> > checking for limits.h... yes
> > checking for linux/netfilter_ipv4.h... no
> > checking for malloc.h... yes
> > checking for math.h... yes
> > checking for memory.h... yes
> > checking for mount.h... no
> > checking for net/if.h... yes
> > checking for netdb.h... yes
> > checking for netinet/if_ether.h... yes
> > checking for netinet/in.h... yes
> > checking for netinet/tcp.h... yes
> > checking for netinet/ip_compat.h... no
> > checking for netinet/ip_fil_compat.h... no
> > checking for netinet/ip_fil.h... no
> > checking for netinet/ip_nat.h... no
> > checking for poll.h... yes
> > checking for pwd.h... yes
> > checking for regex.h... yes
> > checking for resolv.h... yes
> > checking for sched.h... yes
> > checking for signal.h... yes
> > checking for stdarg.h... yes
> > checking for stddef.h... yes
> > checking for stdio.h... yes
> > checking for stdlib.h... yes
> > checking for string.h... yes
> > checking for strings.h... yes
> > checking for sys/file.h... yes
> > checking for sys/ioctl.h... yes
> > checking for sys/mount.h... yes
> > checking for sys/msg.h... yes
> > checking for sys/param.h... yes
> > checking for sys/resource.h... yes
> > checking for sys/select.h... no
> > checking for sys/socket.h... yes
> > checking for sys/stat.h... yes
> > checking for sys/statvfs.h... yes
> > checking for sys/vfs.h... yes
> > checking for sys/syscall.h... yes
> > checking for sys/time.h... yes
> > checking for sys/types.h... yes
> > checking for sys/un.h... yes
> > checking for sys/vfs.h... (cached) yes
> > checking for sys/wait.h... yes
> > checking for syslog.h... yes
> > checking for time.h... yes
> > checking for unistd.h... yes
> > checking for varargs.h... yes
> > checking for working const... yes
> > checking whether byte ordering is bigendian... yes
> > checking if ANSI prototypes work... yes
> > checking for tm->tm_gmtoff... no
> > checking for struct mallinfo... yes
> > checking for extended mallinfo... no
> > checking for struct rusage... yes
> > checking for ip->ip_hl... yes
> > checking size of int... 4
> > checking size of long... 4
> > checking size of void *... 4
> > checking for working alloca.h... yes
> > checking for alloca... yes
> > checking for pid_t... yes
> > checking for size_t... yes
> > checking for ssize_t... yes
> > checking for off_t... yes
> > checking for mode_t... yes
> > checking for fd_mask... yes
> > checking for socklen_t... yes
> > checking for mtyp_t... no
> > checking for main in -lnsl... yes
> > checking for main in -lsocket... no
> > checking for main in -lgnumalloc... no
> > checking for main in -lmalloc... yes
> > checking for main in -lbsd... no
> > checking for main in -lregex... no
> > checking for gethostbyname in -lbind... no
> > checking for inet_aton in -lresolv... no
> > checking for main in -lresolv... no
> > checking for main in -lm... yes
> > checking for crypt in -lcrypt... yes
> > checking for dlopen in -ldl... no
> > checking for main in -lpthread... yes
> > disabling poll for hppa1.1-hp-hpux11.11...
> > checking for bcopy... yes
> > checking for backtrace_symbols_fd... no
> > checking for crypt... yes
> > checking for fchmod... yes
> > checking for getdtablesize... yes
> > checking for getpagesize... yes
> > checking for getrusage... yes
> > checking for getspnam... no
> > checking for lrand48... yes
> > checking for mallinfo... yes
> > checking for mallocblksize... no
> > checking for mallopt... yes
> > checking for memcpy... yes
> > checking for memmove... yes
> > checking for memset... yes
> > checking for mkstemp... yes
> > checking for mktime... yes
> > checking for mstats... no
> > checking for poll... (cached) no
> > checking for pthread_attr_setscope... no
> > checking for pthread_setschedparam... no
> > checking for pthread_attr_setschedparam... no
> > checking for pthread_sigmask... no
> > checking for putenv... yes
> > checking for random... yes
> > checking for regcomp... yes
> > checking for regexec... yes
> > checking for regfree... yes
> > checking for res_init... yes
> > checking for rint... yes
> > checking for seteuid... no
> > checking for setgroups... yes
> > checking for setpgrp... yes
> > checking for setrlimit... yes
> > checking for getrlimit... yes
> > checking for setsid... yes
> > checking for sigaction... yes
> > checking for snprintf... yes
> > checking for srand48... yes
> > checking for srandom... yes
> > checking for statfs... yes
> > checking for sysconf... yes
> > checking for syslog... yes
> > checking for timegm... no
> > checking for vsnprintf... yes
> > checking if setresuid is implemented... yes
> > checking if GNUregex needs to be compiled... no
> > checking for drand48... yes
> > checking for tempnam... yes
> > checking for strerror... yes
> > checking Default FD_SETSIZE value... 2048
> > checking Maximum number of filedescriptors we can open... 1024
> > checking Default UDP send buffer size... 65535
> > checking Default UDP receive buffer size... 65535
> > checking Default TCP send buffer size... 32768
> > checking Default TCP receive buffer size... 32768
> > checking if sys_errlist is already defined... yes
> > checking for libresolv _dns_ttl_ hack... no
> > checking if inet_ntoa() actually works... yes
> > checking for working statvfs() interface... yes
> > checking for _res.nsaddr_list... yes
> > updating cache ./config.cache
> > creating ./config.status
> > creating ./makefile
> > creating ./lib/Makefile
> > creating ./include/config.h
> > creating ./scripts/Makefile
> > creating ./scripts/RunCache
> > creating ./scripts/RunAccel
> > creating ./src/Makefile
> > creating ./src/fs/Makefile
> > creating ./src/fs/ufs/Makefile
> > creating ./src/repl/Makefile
> > creating ./src/repl/lru/Makefile
> > creating ./contrib/Makefile
> > creating ./icons/Makefile
> > creating ./errors/Makefile
> > creating ./auth_modules/Makefile
> > creating ./auth_modules/LDAP/Makefile
> > creating ./auth_modules/MSNT/Makefile
> > creating ./auth_modules/NCSA/Makefile
> > creating ./auth_modules/PAM/Makefile
> > creating ./auth_modules/SMB/Makefile
> > creating ./auth_modules/YP/Makefile
> > creating ./auth_modules/getpwnam/Makefile
> > creating include/autoconf.h
> >
> >
> >
> >
> >
> > **********************************************************************
> > This email may be confidential and/or privileged. Only the intended
> > recipient may access or use it. Any dissemination, distribution or
> > copying of this email is strictly prohibited. If you are not the
> > intended recipient please notify us immediately by return email and
> > then erase the email.
> >
> > We use virus scanning software but exclude all liability for viruses
> > or similar in any attachment or message...,..,..,.
> > **********************************************************************
Received on Fri Jan 04 2002 - 02:39:52 MST