Re: changes to make mib.txt work with current net-snmp

You can make that more compact as:

SQUID-MIB DEFINITIONS ::= BEGIN
enterprises OBJECT IDENTIFIER ::= { iso org(3) dod(6) internet(1) private(4)
1 }
nlanr OBJECT IDENTIFIER ::= { enterprises 3495 }

(you can merge those two lines also, but that's going a bit far)

Although you shouldn't have to do it due to:

IMPORTS
        enterprises [...]
                    FROM SNMPv2-SMI

And in fact if you are defining enterprises yourself, you shouldn't also
import it. Are you sure your MIB path includes SNMPv2-SMI.txt?

David.

--
David Luyer                                     Phone:   +61 3 9674 7525
Network Development Manager    P A C I F I C    Fax:     +61 3 9699 8693
Pacific Internet (Australia)  I N T E R N E T   Mobile:  +61 4 1111 BYTE
http://www.pacific.net.au/                      NASDAQ:  PCNTF
----- Original Message -----
From: "Duane Wessels" <wessels@squid-cache.org>
To: <squid-dev@squid-cache.org>
Sent: Friday, February 07, 2003 4:50 PM
Subject: changes to make mib.txt work with current net-snmp
> I find that a recent installation of net-snmp apparently does
> not parse Squid's mib.txt file until I make this change:
>
> --- SQUID-MIB.txt       Tue May 16 01:06:05 2000
> +++ SQUID-MIB.txt.new   Thu Feb  6 22:40:59 2003
> @@ -1,9 +1,14 @@
> -SQUID-MIB  { iso org(3) dod(6) internet(1) private(4) enterprises(1)
3495 }
> -
> -DEFINITIONS ::= BEGIN
> +SQUID-MIB DEFINITIONS ::= BEGIN
>  --
>  -- $Id: mib.txt,v 1.25 2000/05/16 07:06:05 wessels Exp $
>  --
> +
> +org            OBJECT IDENTIFIER ::= { iso 3 }  --  "iso" = 1
> +dod            OBJECT IDENTIFIER ::= { org 6 }
> +internet       OBJECT IDENTIFIER ::= { dod 1 }
> +private        OBJECT IDENTIFIER ::= { internet 4 }
> +enterprises    OBJECT IDENTIFIER ::= { private 1 }
> +
>
>  IMPORTS
>         enterprises, Unsigned32, TimeTicks, Gauge32, Counter32,
>
>
>
> Any SNMP-knowledgeable folks have an opinion on this change?
>
>