Build failed in Hudson: 3.HEAD-i386-FreeBSD-6.4 #444

From: <noc_at_squid-cache.org>
Date: Thu, 19 Aug 2010 02:45:51 +0200 (CEST)

See <http://build.squid-cache.org/job/3.HEAD-i386-FreeBSD-6.4/444/changes>

Changes:

[Automatic source maintenance <squidadm_at_squid-cache.org>] SourceFormat Enforcement

[Amos Jeffries <amosjeffries_at_squid-cache.org>] Author: Alex Rousskov <rousskov_at_measurement-factory.com>
Bug 3016: HTTP/1.1 compliance: default keep-alive for 1.0/1.1 clients.

aka. NTLM Authentication with Java UA + SSL Problem
Moved httpMsgIsPersistent(version, headers) to HttpMsg::persistent(void).

This move makes it clear that the logic applies only to the message being
examined and not some irrelevant information such as HTTP version supported
by Squid.

Side-effects:

- In v3.2, Squid stops using persistent connections with HTTP/1.0 clients
that do not send "Connection: keep-alive".

- In v3.1, Squid starts using persistent connections with HTTP/1.1 clients
that do not send "Connection: close".

- HttpReply now sets HttpMsg::http_ver member. It is not clear whether
that member was ever used for HttpReplies though.

[Amos Jeffries <squid3_at_treenet.co.nz>] Author: Various Translators
Translations Update auto-save

------------------------------------------
[...truncated 114 lines...]
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for ar... /usr/bin/ar
checking for strip... strip
checking for ranlib... (cached) ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for dlfcn.h... yes
checking whether we are using the GNU C++ compiler... (cached) yes
checking whether g++ accepts -g... (cached) yes
checking dependency style of g++... (cached) gcc3
checking how to run the C++ preprocessor... g++ -E
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... yes
checking dynamic linker characteristics... freebsd6.4 ld.so
checking how to hardcode library paths into programs... immediate
checking for shl_load... no
checking for shl_load in -ldld... no
checking for dlopen... yes
checking whether a program can dlopen itself... yes
checking whether a statically linked program can dlopen itself... no
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for ld used by g++... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC -DPIC
checking if g++ PIC flag -fPIC -DPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking if g++ supports -c -o file.o... (cached) yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... freebsd6.4 ld.so
checking how to hardcode library paths into programs... immediate
checking which extension is used for runtime loadable modules... .so
checking which variable specifies run-time module search path... LD_LIBRARY_PATH
checking for the default library search path... /lib /usr/lib
checking for library containing dlopen... none required
checking for dlerror... yes
checking for shl_load... (cached) no
checking for shl_load in -ldld... (cached) no
checking for dld_link in -ldld... no
checking for _ prefix in compiled symbols... no
checking whether deplibs are loaded by dlopen... yes
checking for argz.h... no
checking for error_t... no
checking for argz_add... no
checking for argz_append... no
checking for argz_count... no
checking for argz_create_sep... no
checking for argz_insert... no
checking for argz_next... no
checking for argz_stringify... no
checking whether libtool supports -dlopen/-dlpreopen... yes
checking for ltdl.h... no
checking where to find libltdl headers... -I${top_srcdir}/libltdl
checking where to find libltdl library... ${top_build_prefix}libltdl/libltdlc.la
checking for unistd.h... (cached) yes
checking for dl.h... no
checking for sys/dl.h... no
checking for dld.h... no
checking for mach-o/dyld.h... no
checking for dirent.h... yes
checking for closedir... yes
checking for opendir... yes
checking for readdir... yes
checking for strlcat... yes
checking for strlcpy... yes
checking for library containing dlopen... (cached) none required
checking for dlerror... (cached) yes
checking for shl_load... (cached) no
checking for shl_load in -ldld... (cached) no
checking for dld_link in -ldld... (cached) no
checking what kind of compiler we're using... gcc
checking for compiler variant... gcc
checking whether compiler accepts -Werror -fhuge-objects... no
configure: inlining optimizations enabled: yes
configure: cbdata debugging enabled: no
configure: xmalloc stats display: no
checking for DiskIO modules to be enabled... AIO Blocking DiskDaemon DiskThreads
checking aio.h usability... yes
checking aio.h presence... yes
checking for aio.h... yes
checking for aio_read in -lrt... no
checking for aio_read in -laio... no
configure: Native POSIX AIO support not detected. AIO automatically disabled.
configure: AIO DiskIO Module disabled. Missing POSIX AIO support.
configure: Enabling Blocking DiskIO module
configure: Enabling DiskDaemon DiskIO module
checking for pthread_create in -lpthread... yes
configure: Enabling DiskThreads DiskIO module
configure: IO Modules built: Blocking DiskDaemon DiskThreads
checking for available StoreIO modules... aufs diskd ufs
configure: Store modules built: aufs diskd ufs
configure: Removal policies to build: lru
configure: Disabling ESI processor
checking whether to support eCAP... no, implicitly
configure: User-Agent logging enabled: no
configure: Referer logging enabled: no
configure: Web Cache Coordination Protocol enabled: yes
configure: Web Cache Coordination V2 Protocol enabled: yes
configure: Kill parent on shutdown hack enabled: no
configure: SNMP support enabled: yes
configure: WARNING: EUI support probably will not work on host i386-unknown-freebsd6.4.
checking Iphlpapi.h usability... no
checking Iphlpapi.h presence... no
checking for Iphlpapi.h... no
checking net/if_arp.h usability... no
checking net/if_arp.h presence... yes
configure: WARNING: net/if_arp.h: present but cannot be compiled
configure: WARNING: net/if_arp.h: check for missing prerequisite headers?
configure: WARNING: net/if_arp.h: see the Autoconf documentation
configure: WARNING: net/if_arp.h: section "Present But Cannot Be Compiled"
configure: WARNING: net/if_arp.h: proceeding with the preprocessor's result
configure: WARNING: net/if_arp.h: in the future, the compiler will take precedence
configure: WARNING: ## ----------------------------------------------- ##
configure: WARNING: ## Report this to http://www.squid-cache.org/bugs/ ##
configure: WARNING: ## ----------------------------------------------- ##
checking for net/if_arp.h... yes
checking net/if_dl.h usability... yes
checking net/if_dl.h presence... yes
checking for net/if_dl.h... yes
checking net/route.h usability... no
checking net/route.h presence... yes
configure: WARNING: net/route.h: present but cannot be compiled
configure: WARNING: net/route.h: check for missing prerequisite headers?
configure: WARNING: net/route.h: see the Autoconf documentation
configure: WARNING: net/route.h: section "Present But Cannot Be Compiled"
configure: WARNING: net/route.h: proceeding with the preprocessor's result
configure: WARNING: net/route.h: in the future, the compiler will take precedence
configure: WARNING: ## ----------------------------------------------- ##
configure: WARNING: ## Report this to http://www.squid-cache.org/bugs/ ##
configure: WARNING: ## ----------------------------------------------- ##
checking for net/route.h... yes
checking sys/sockio.h usability... yes
checking sys/sockio.h presence... yes
checking for sys/sockio.h... yes
checking sys/sysctl.h usability... yes
checking sys/sysctl.h presence... yes
checking for sys/sysctl.h... yes
configure: EUI (MAC address) controls enabled: yes
configure: HTCP support enabled: yes
configure: SSL gatewaying support enabled: no
configure: Using OpenSSL MD5 implementation: no
configure: Forw/Via database enabled: no
configure: Cache Digests enabled: no
configure: Setting COSS membuf size to 1048576 bytes
configure: enabling select syscall for net I/O: auto
configure: enabling poll syscall for net I/O: auto
configure: enabling kqueue for net I/O: no
configure: enabling epoll syscall for net I/O: auto
checking for library containing epoll_ctl... no
checking sys/epoll.h usability... no
checking sys/epoll.h presence... no
checking for sys/epoll.h... no
configure: HTTP violations support enabled: yes
configure: FreeBSD IPFW-based transparent proxying enabled: no
configure: IPF-based transparent proxying requested: no
configure: PF-based transparent proxying requested: auto
configure: Linux Netfilter support requested: auto
configure: Leak Finder enabled: no
configure: Support for X-Forwarded-For enabled: yes
configure: Support for Ident lookups enabled: yes
configure: Authentication support enabled: yes
configure: Basic auth helper LDAP ... found but cannot be built
configure: Basic auth helper SASL ... found but cannot be built
configure: Basic auth helper SMB ... found but cannot be built
configure: Basic auth helper SSPI ... found but cannot be built
configure: Basic auth helpers to be built: DB MSNT MSNT-multi-domain NCSA NIS PAM POP3 RADIUS fake getpwnam
configure: NTLM auth helper SSPI ... found but cannot be built
configure: NTLM auth helper no_check ... found but cannot be built
configure: NTLM auth helpers built: fake smb_lm
configure: Negotiate auth helper SSPI ... found but cannot be built
configure: Negotiate auth helpers built: kerberos
configure: Digest auth helper LDAP ... found but cannot be built
configure: Digest auth helper eDirectory ... found but cannot be built
configure: Digest auth helpers built: file
configure: Log daemon helpers built: file
checking for krb5-config... yes
checking gssapi.h usability... yes
checking gssapi.h presence... yes
checking for gssapi.h... yes
checking gssapi/gssapi.h usability... no
checking gssapi/gssapi.h presence... no
checking for gssapi/gssapi.h... no
checking gssapi/gssapi_krb5.h usability... no
checking gssapi/gssapi_krb5.h presence... no
checking for gssapi/gssapi_krb5.h... no
checking krb5.h usability... yes
checking krb5.h presence... yes
checking for krb5.h... yes
checking com_err.h usability... yes
checking com_err.h presence... yes
checking for com_err.h... yes
checking et/com_err.h usability... no
checking et/com_err.h presence... no
checking for et/com_err.h... no
checking for broken Solaris krb5.h... no
checking for max_skew in struct krb5_context... no
checking for error_message in -lcom_err... yes
checking for krb5_get_err_text in -lkrb5... yes
checking for krb5_get_error_message in -lkrb5... no
checking whether krb5_kt_free_entry is declared... yes
checking for krb5_kt_free_entry in -lkrb5... yes
checking for krb5_get_init_creds_keytab in -lkrb5... yes
checking for krb5_get_max_time_skew in -lkrb5... no
checking for krb5_get_profile in -lkrb5... no
checking for profile_get_integer in -lkrb5... no
checking for profile_release in -lkrb5... no
checking for memory cache... no
checking for working gssapi... yes
checking for spnego support... no
checking for working krb5... no
configure: ntlm-fail-open enabled: no
configure: external acl helper AD_group ... found but cannot be built
configure: external acl helper LDAP_group ... found but cannot be built
configure: external acl helper LM_group ... found but cannot be built
configure: external acl helper eDirectory_userip ... found but cannot be built
 * The following flags are included in the dbopen(3) call as part of the
 * a problem. Wish I'd left another flags word in the dbopen call.
DB *dbopen(const char *, int, int, DBTYPE, const void *);
configure: external acl helper wbinfo_group ... found but cannot be built
configure: External acl helpers built: file_userip kerberos_ldap_group session unix_group
configure: URL rewrite helper candidates: fake
configure: URL rewrite helpers built: fake
configure: Valgrind debug support enabled: no
configure: MS Windows service mode enabled: no
checking sasl/sasl.h usability... no
checking sasl/sasl.h presence... no
checking for sasl/sasl.h... no
checking sasl.h usability... no
checking sasl.h presence... no
checking for sasl.h... no
checking for sasl_errstring in -lsasl2... no
checking for sasl_errstring in -lsasl... no
configure: error: Neither SASL nor SASL2 found
buildtest.sh result is 1
BUILD: .././test-suite/buildtests/layer-00-default.opts
configure: error: Neither SASL nor SASL2 found
Build FAILED.
Received on Thu Aug 19 2010 - 00:45:55 MDT

This archive was generated by hypermail 2.2.0 : Thu Aug 19 2010 - 12:00:04 MDT