See <http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/195/changes>
Changes:
[Amos Jeffries <amosjeffries_at_squid-cache.org>] Author: Alex Rousskov <rousskov_at_measurement-factory.com>
Bug 3020: Segmentation fault: nameservers[vc->ns].vc = NULL
Prevent idnsVCClosed segfaults during shutdown or reconfiguration (at least).
idnsShutdown() schedules comm_close and then frees nameservers[] by
calling idnsFreeNameservers. The closing handler tried to access freed
nameservers[]. The patch prevents access to the freed nameservers[]
array in idnsVCClosed and other functions.
TODO: Nameservers[] array management should be rewritten. The array
should not be freed while there are nameservers using it. It should be
freed when the last entry is gone.
From: 3p1-rock r9583
[Amos Jeffries <amosjeffries_at_squid-cache.org>] Author: Alex Rousskov <rousskov_at_measurement-factory.com>
HTTP/1.1: handle HTTP OPTIONS and TRACE requests with asterisk URIs.
Handle '*' URIs in urlParse(). This allows Squid properly respond to
OPTIONS and TRACE requests with '*' URIs and Max-Forwards value of
zero. Forwarding such requests is out of this change scope and still
does not work because the upstream host and port are not set.
Co-Advisor test cases:
test_case/rfc2616/options-bodyless-asterisk
test_case/rfc2616/maxForwardsZero-OPTIONS-asterisk
test_case/rfc2616/maxForwardsZero-TRACE-asterisk
[Amos Jeffries <amosjeffries_at_squid-cache.org>] Unit-tests for the new HTTP request-line parser
[Amos Jeffries <amosjeffries_at_squid-cache.org>] Harden and speed up HTTP request-line parser
An upgrade/fix to handling HTTP request-lines as specific by
section 5.1 of the RFCs. Specifically to handle a sequence of
unknown bytes up to a terminating LF (\n) octet.
* The semantics as previously documented are taken on. No changes
there, but documentation clarified a bit. Some things previously not
erroring are now doing so. External code impact is in the nature of
reduced special cases to be handled. Specifically raw-CR weirdness in
the request line fields. This occuring in URL was a vulnerability at
least once before.
* Prior updates to HttpParser object for other parse stages opens the
possibility of this parse action returning HTTP status code directly.
Additions are done to make use of this (with the existing status codes
only).
* Input permutations where the unit-tests showed the old parser was
violating its own documentation have been fixed to produce expected
outputs.
* Old parser operated three distinct potentially long parse loops.
Added several local variables to remember various octets seen while
searching for the terminal LF. This removed the need for two of the
parse re-scans (length of method, length of URI).
* relaxed_header_parser will enable it to also skip prefix whitespace
(space character only) and multiple-\r sequences at the end of line.
* --enable-http-violations is still required before it will accept
non-HTTP version types 'downgraded' to HTTP/0.9
[Amos Jeffries <amosjeffries_at_squid-cache.org>] Author: Alex Rousskov <rousskov_at_measurement-factory.com>
Define SIZEOF_OFF_T to fix overflow checks.
Overflow checks were broken because 'SIZEOF_OFF_T <= 4' was always true
because SIZEOF_OFF_T was not defined and, hence, treated as zero.
Co-Advisor test cases:
test_case/rfc2616/noXform-fwd-Content-Range-simple-2147483645-2147483646-2147483647-withCc-toClt
test_case/rfc2616/noXform-fwd-Content-Range-simple-2147483645-2147483646-*-withCc-toClt
[Amos Jeffries <amosjeffries_at_squid-cache.org>] Bug 3033: incorrect information regarding TOS
------------------------------------------
[...truncated 3518 lines...]
if /bin/sh ../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT CommCalls.lo -MD -MP -MF "$depbase.Tpo" -c -o CommCalls.lo ../../src/CommCalls.cc; \
then mv -f "$depbase.Tpo" "$depbase.Plo"; else rm -f "$depbase.Tpo"; exit 1; fi
libtool: compile: g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT comm.lo -MD -MP -MF .deps/comm.Tpo -c ../../src/comm.cc -fPIC -DPIC -o .libs/comm.o
libtool: compile: g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT CommCalls.lo -MD -MP -MF .deps/CommCalls.Tpo -c ../../src/CommCalls.cc -fPIC -DPIC -o .libs/CommCalls.o
libtool: compile: g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT CommCalls.lo -MD -MP -MF .deps/CommCalls.Tpo -c ../../src/CommCalls.cc -o CommCalls.o >/dev/null 2>&1
depbase=`echo DescriptorSet.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`; \
if /bin/sh ../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT DescriptorSet.lo -MD -MP -MF "$depbase.Tpo" -c -o DescriptorSet.lo ../../src/DescriptorSet.cc; \
then mv -f "$depbase.Tpo" "$depbase.Plo"; else rm -f "$depbase.Tpo"; exit 1; fi
libtool: compile: g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT DescriptorSet.lo -MD -MP -MF .deps/DescriptorSet.Tpo -c ../../src/DescriptorSet.cc -fPIC -DPIC -o .libs/DescriptorSet.o
libtool: compile: g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT comm.lo -MD -MP -MF .deps/comm.Tpo -c ../../src/comm.cc -o comm.o >/dev/null 2>&1
libtool: compile: g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT DescriptorSet.lo -MD -MP -MF .deps/DescriptorSet.Tpo -c ../../src/DescriptorSet.cc -o DescriptorSet.o >/dev/null 2>&1
depbase=`echo SquidConfig.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`; \
if /bin/sh ../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT SquidConfig.lo -MD -MP -MF "$depbase.Tpo" -c -o SquidConfig.lo ../../src/SquidConfig.cc; \
then mv -f "$depbase.Tpo" "$depbase.Plo"; else rm -f "$depbase.Tpo"; exit 1; fi
libtool: compile: g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT SquidConfig.lo -MD -MP -MF .deps/SquidConfig.Tpo -c ../../src/SquidConfig.cc -fPIC -DPIC -o .libs/SquidConfig.o
libtool: compile: g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT SquidConfig.lo -MD -MP -MF .deps/SquidConfig.Tpo -c ../../src/SquidConfig.cc -o SquidConfig.o >/dev/null 2>&1
depbase=`echo TextException.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`; \
if /bin/sh ../libtool --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT TextException.lo -MD -MP -MF "$depbase.Tpo" -c -o TextException.lo ../../src/TextException.cc; \
then mv -f "$depbase.Tpo" "$depbase.Plo"; else rm -f "$depbase.Tpo"; exit 1; fi
libtool: compile: g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT TextException.lo -MD -MP -MF .deps/TextException.Tpo -c ../../src/TextException.cc -fPIC -DPIC -o .libs/TextException.o
libtool: compile: g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT TextException.lo -MD -MP -MF .deps/TextException.Tpo -c ../../src/TextException.cc -o TextException.o >/dev/null 2>&1
depbase=`echo DiskIO/DiskDaemon/diskd.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT DiskIO/DiskDaemon/diskd.o -MD -MP -MF "$depbase.Tpo" -c -o DiskIO/DiskDaemon/diskd.o ../../src/DiskIO/DiskDaemon/diskd.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo unlinkd_daemon.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT unlinkd_daemon.o -MD -MP -MF "$depbase.Tpo" -c -o unlinkd_daemon.o ../../src/unlinkd_daemon.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo SquidNew.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT SquidNew.o -MD -MP -MF "$depbase.Tpo" -c -o SquidNew.o ../../src/SquidNew.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo AclRegs.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT AclRegs.o -MD -MP -MF "$depbase.Tpo" -c -o AclRegs.o ../../src/AclRegs.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo AuthReg.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT AuthReg.o -MD -MP -MF "$depbase.Tpo" -c -o AuthReg.o ../../src/AuthReg.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo access_log.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT access_log.o -MD -MP -MF "$depbase.Tpo" -c -o access_log.o ../../src/access_log.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo AsyncEngine.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT AsyncEngine.o -MD -MP -MF "$depbase.Tpo" -c -o AsyncEngine.o ../../src/AsyncEngine.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo cache_cf.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT cache_cf.o -MD -MP -MF "$depbase.Tpo" -c -o cache_cf.o ../../src/cache_cf.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo ProtoPort.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT ProtoPort.o -MD -MP -MF "$depbase.Tpo" -c -o ProtoPort.o ../../src/ProtoPort.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo CacheDigest.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT CacheDigest.o -MD -MP -MF "$depbase.Tpo" -c -o CacheDigest.o ../../src/CacheDigest.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo cache_manager.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT cache_manager.o -MD -MP -MF "$depbase.Tpo" -c -o cache_manager.o ../../src/cache_manager.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo carp.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT carp.o -MD -MP -MF "$depbase.Tpo" -c -o carp.o ../../src/carp.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo cbdata.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT cbdata.o -MD -MP -MF "$depbase.Tpo" -c -o cbdata.o ../../src/cbdata.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo ChunkedCodingParser.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT ChunkedCodingParser.o -MD -MP -MF "$depbase.Tpo" -c -o ChunkedCodingParser.o ../../src/ChunkedCodingParser.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo client_db.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT client_db.o -MD -MP -MF "$depbase.Tpo" -c -o client_db.o ../../src/client_db.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo client_side.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT client_side.o -MD -MP -MF "$depbase.Tpo" -c -o client_side.o ../../src/client_side.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo client_side_reply.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT client_side_reply.o -MD -MP -MF "$depbase.Tpo" -c -o client_side_reply.o ../../src/client_side_reply.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo client_side_request.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT client_side_request.o -MD -MP -MF "$depbase.Tpo" -c -o client_side_request.o ../../src/client_side_request.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo BodyPipe.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT BodyPipe.o -MD -MP -MF "$depbase.Tpo" -c -o BodyPipe.o ../../src/BodyPipe.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo clientStream.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT clientStream.o -MD -MP -MF "$depbase.Tpo" -c -o clientStream.o ../../src/clientStream.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo CompletionDispatcher.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT CompletionDispatcher.o -MD -MP -MF "$depbase.Tpo" -c -o CompletionDispatcher.o ../../src/CompletionDispatcher.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo comm_select.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT comm_select.o -MD -MP -MF "$depbase.Tpo" -c -o comm_select.o ../../src/comm_select.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo comm_select_win32.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT comm_select_win32.o -MD -MP -MF "$depbase.Tpo" -c -o comm_select_win32.o ../../src/comm_select_win32.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo comm_poll.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT comm_poll.o -MD -MP -MF "$depbase.Tpo" -c -o comm_poll.o ../../src/comm_poll.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo comm_epoll.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT comm_epoll.o -MD -MP -MF "$depbase.Tpo" -c -o comm_epoll.o ../../src/comm_epoll.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo comm_kqueue.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT comm_kqueue.o -MD -MP -MF "$depbase.Tpo" -c -o comm_kqueue.o ../../src/comm_kqueue.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo ConfigOption.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT ConfigOption.o -MD -MP -MF "$depbase.Tpo" -c -o ConfigOption.o ../../src/ConfigOption.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo ConfigParser.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT ConfigParser.o -MD -MP -MF "$depbase.Tpo" -c -o ConfigParser.o ../../src/ConfigParser.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo debug.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT debug.o -MD -MP -MF "$depbase.Tpo" -c -o debug.o ../../src/debug.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo disk.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT disk.o -MD -MP -MF "$depbase.Tpo" -c -o disk.o ../../src/disk.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo dlink.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT dlink.o -MD -MP -MF "$depbase.Tpo" -c -o dlink.o ../../src/dlink.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo dns_internal.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT dns_internal.o -MD -MP -MF "$depbase.Tpo" -c -o dns_internal.o ../../src/dns_internal.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo DnsLookupDetails.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT DnsLookupDetails.o -MD -MP -MF "$depbase.Tpo" -c -o DnsLookupDetails.o ../../src/DnsLookupDetails.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo errorpage.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT errorpage.o -MD -MP -MF "$depbase.Tpo" -c -o errorpage.o ../../src/errorpage.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo ETag.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT ETag.o -MD -MP -MF "$depbase.Tpo" -c -o ETag.o ../../src/ETag.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo event.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT event.o -MD -MP -MF "$depbase.Tpo" -c -o event.o ../../src/event.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo EventLoop.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT EventLoop.o -MD -MP -MF "$depbase.Tpo" -c -o EventLoop.o ../../src/EventLoop.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo external_acl.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT external_acl.o -MD -MP -MF "$depbase.Tpo" -c -o external_acl.o ../../src/external_acl.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo ExternalACLEntry.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT ExternalACLEntry.o -MD -MP -MF "$depbase.Tpo" -c -o ExternalACLEntry.o ../../src/ExternalACLEntry.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo fd.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT fd.o -MD -MP -MF "$depbase.Tpo" -c -o fd.o ../../src/fd.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo fde.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT fde.o -MD -MP -MF "$depbase.Tpo" -c -o fde.o ../../src/fde.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo filemap.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT filemap.o -MD -MP -MF "$depbase.Tpo" -c -o filemap.o ../../src/filemap.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo forward.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT forward.o -MD -MP -MF "$depbase.Tpo" -c -o forward.o ../../src/forward.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo fqdncache.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT fqdncache.o -MD -MP -MF "$depbase.Tpo" -c -o fqdncache.o ../../src/fqdncache.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo ftp.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT ftp.o -MD -MP -MF "$depbase.Tpo" -c -o ftp.o ../../src/ftp.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo gopher.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT gopher.o -MD -MP -MF "$depbase.Tpo" -c -o gopher.o ../../src/gopher.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo helper.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT helper.o -MD -MP -MF "$depbase.Tpo" -c -o helper.o ../../src/helper.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo htcp.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT htcp.o -MD -MP -MF "$depbase.Tpo" -c -o htcp.o ../../src/htcp.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo http.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT http.o -MD -MP -MF "$depbase.Tpo" -c -o http.o ../../src/http.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo HttpStatusLine.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT HttpStatusLine.o -MD -MP -MF "$depbase.Tpo" -c -o HttpStatusLine.o ../../src/HttpStatusLine.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo HttpHdrCc.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT HttpHdrCc.o -MD -MP -MF "$depbase.Tpo" -c -o HttpHdrCc.o ../../src/HttpHdrCc.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo HttpHdrRange.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT HttpHdrRange.o -MD -MP -MF "$depbase.Tpo" -c -o HttpHdrRange.o ../../src/HttpHdrRange.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo HttpHdrSc.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT HttpHdrSc.o -MD -MP -MF "$depbase.Tpo" -c -o HttpHdrSc.o ../../src/HttpHdrSc.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo HttpHdrScTarget.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT HttpHdrScTarget.o -MD -MP -MF "$depbase.Tpo" -c -o HttpHdrScTarget.o ../../src/HttpHdrScTarget.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo HttpHdrContRange.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT HttpHdrContRange.o -MD -MP -MF "$depbase.Tpo" -c -o HttpHdrContRange.o ../../src/HttpHdrContRange.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo HttpHeader.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT HttpHeader.o -MD -MP -MF "$depbase.Tpo" -c -o HttpHeader.o ../../src/HttpHeader.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo HttpHeaderTools.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT HttpHeaderTools.o -MD -MP -MF "$depbase.Tpo" -c -o HttpHeaderTools.o ../../src/HttpHeaderTools.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo HttpBody.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT HttpBody.o -MD -MP -MF "$depbase.Tpo" -c -o HttpBody.o ../../src/HttpBody.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo HttpMsg.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -g -O2 -MT HttpMsg.o -MD -MP -MF "$depbase.Tpo" -c -o HttpMsg.o ../../src/HttpMsg.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
../../src/HttpMsg.cc: In member function ‘int HttpParser::parseRequestFirstLine()’:
../../src/HttpMsg.cc:520: error: ‘request_parse_status’ was not declared in this scope
../../src/HttpMsg.cc:541: error: ‘request_parse_status’ was not declared in this scope
../../src/HttpMsg.cc:548: error: ‘request_parse_status’ was not declared in this scope
../../src/HttpMsg.cc:553: error: ‘request_parse_status’ was not declared in this scope
../../src/HttpMsg.cc:559: error: ‘request_parse_status’ was not declared in this scope
../../src/HttpMsg.cc:570: error: ‘request_parse_status’ was not declared in this scope
../../src/HttpMsg.cc:579: error: ‘request_parse_status’ was not declared in this scope
../../src/HttpMsg.cc:585: error: ‘request_parse_status’ was not declared in this scope
../../src/HttpMsg.cc:603: error: ‘request_parse_status’ was not declared in this scope
../../src/HttpMsg.cc:612: error: ‘request_parse_status’ was not declared in this scope
../../src/HttpMsg.cc:622: error: ‘request_parse_status’ was not declared in this scope
../../src/HttpMsg.cc:629: error: ‘request_parse_status’ was not declared in this scope
../../src/HttpMsg.cc:634: error: ‘request_parse_status’ was not declared in this scope
../../src/HttpMsg.cc:640: error: ‘request_parse_status’ was not declared in this scope
../../src/HttpMsg.cc:650: error: ‘request_parse_status’ was not declared in this scope
../../src/HttpMsg.cc:658: error: ‘request_parse_status’ was not declared in this scope
make[4]: *** [HttpMsg.o] Error 1
make[4]: *** Waiting for unfinished jobs....
make[4]: Leaving directory `<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_build/src'>
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory `<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_build/src'>
make[2]: *** [all] Error 2
make[2]: Leaving directory `<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_build/src'>
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `<http://build.squid-cache.org/job/3.1-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.1.7-BZR/_build'>
make: *** [distcheck] Error 2
buildtest.sh result is 2
BUILD: .././test-suite/buildtests/layer-00-default.opts
../../src/HttpMsg.cc:520: error: ‘request_parse_status’ was not declared in this scope
../../src/HttpMsg.cc:541: error: ‘request_parse_status’ was not declared in this scope
../../src/HttpMsg.cc:548: error: ‘request_parse_status’ was not declared in this scope
../../src/HttpMsg.cc:553: error: ‘request_parse_status’ was not declared in this scope
../../src/HttpMsg.cc:559: error: ‘request_parse_status’ was not declared in this scope
../../src/HttpMsg.cc:570: error: ‘request_parse_status’ was not declared in this scope
../../src/HttpMsg.cc:579: error: ‘request_parse_status’ was not declared in this scope
../../src/HttpMsg.cc:585: error: ‘request_parse_status’ was not declared in this scope
../../src/HttpMsg.cc:603: error: ‘request_parse_status’ was not declared in this scope
../../src/HttpMsg.cc:612: error: ‘request_parse_status’ was not declared in this scope
../../src/HttpMsg.cc:622: error: ‘request_parse_status’ was not declared in this scope
../../src/HttpMsg.cc:629: error: ‘request_parse_status’ was not declared in this scope
../../src/HttpMsg.cc:634: error: ‘request_parse_status’ was not declared in this scope
../../src/HttpMsg.cc:640: error: ‘request_parse_status’ was not declared in this scope
../../src/HttpMsg.cc:650: error: ‘request_parse_status’ was not declared in this scope
../../src/HttpMsg.cc:658: error: ‘request_parse_status’ was not declared in this scope
make[4]: *** [HttpMsg.o] Error 1
make[3]: *** [all-recursive] Error 1
make[2]: *** [all] Error 2
make[1]: *** [all-recursive] Error 1
make: *** [distcheck] Error 2
Build FAILED.
Received on Fri Sep 03 2010 - 05:58:54 MDT
This archive was generated by hypermail 2.2.0 : Fri Sep 03 2010 - 12:00:09 MDT