See <http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/1646/changes>
Changes:
[Automatic source maintenance] SourceFormat Enforcement
[Alex Rousskov] Bug 3150: do not start useless unlinkd.
Unlinkd may be used only by UFS storage but, before the change, Squid
always started unlinkd if it was built, even if it was not needed.
Whether a SwapDir may use unlinkd depends on the SwapDir
implementation and DiskIO strategy it uses. The patch adds
unlinkdUseful() method to SwapDir and DiskIOStrategy to decide if
unlinkd should be started.
After the change, unlinkd may be started during reconfiguration and
unlinkdInit() may be called multiple times.
After the change, unlinkdClose() may be called when unlinkd was never
started. The patch removes a warning which was printed in this case
on Windows.
[Alex Rousskov] Optimization: Make read requests in [Rock] IpcIo bypass max-swap-rate limit.
Before the change, IpcIoFile::WaitBeforePop() delayed both swap ins
(hits) and swap outs (misses). This is suboptimal because reads do
not usually accumulate unfinished I/O requests in OS buffers and,
hence, do not eventually require the OS to block all I/O.
Ideally, a disker should probably dequeue all pending disker requests,
satisfy reads ASAP, and then handle writes, but that is difficult for
several reasons. The patch implements a simpler approach: peek the
next request to be popped, and if it is a swap in (i.e., read or hit),
then pop it without any delay.
When a read is popped, we still adjust the balance member and LastIo,
because we do want to maintain the configured average I/O rate. When a
write request comes in, it will be delayed [longer] if needed.
In the extreme case of a very long stream of read requests (no writes
at all), there will be essentially no I/O rate limit and that is what
we want.
[Alex Rousskov] Do not allow max-swap-rate and swap-timeout reconfiguration for Rock Store.
These options are used to configure DiskIO module during Rock SwapDir
initialization. During reconfiguration, the values are updated in Rock
SwapDir, but they do not reach the DiskIO module. Thus, while Squid says that
option has a new value, the new value is never really used. This patch fixes
this inconsistency.
In the future, we may support reconfiguration for max-swap-rate and
swap-timeout, but that would require adding reconfiguration support
to DiskIO modules.
[Alex Rousskov] Rename Ipc::FewToFewBiQueue method peek() to findOldest()
to better match the method functionality.
[Alex Rousskov] Independent shared I/O page limit.
Shared memory pages are used for shared memory cache and IPC I/O module.
Before this change, the number of shared memory pages needed for IPC I/O
was calculated from the size of shared memory cache. Moreover, shared
memory cache was required for IPC I/O.
The patch makes the limit for shared I/O pages independent from the
shared memory cache size and presence. IPC I/O pages limit is calculated
from the number of workers and diskers; it does not depend on cache_dir
configuration. This may change in the future if we learn how to compute
it (e.g., by multiplying max-swap-rate and swap-timeout if both are
available).
------------------------------------------
[...truncated 5456 lines...]
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT snmp_core.o -MD -MP -MF "$depbase.Tpo" -c -o snmp_core.o ../../src/snmp_core.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo snmp_agent.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT snmp_agent.o -MD -MP -MF "$depbase.Tpo" -c -o snmp_agent.o ../../src/snmp_agent.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo SquidMath.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT SquidMath.o -MD -MP -MF "$depbase.Tpo" -c -o SquidMath.o ../../src/SquidMath.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo SquidNew.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT SquidNew.o -MD -MP -MF "$depbase.Tpo" -c -o SquidNew.o ../../src/SquidNew.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo stat.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT stat.o -MD -MP -MF "$depbase.Tpo" -c -o stat.o ../../src/stat.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo StatHist.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT StatHist.o -MD -MP -MF "$depbase.Tpo" -c -o StatHist.o ../../src/StatHist.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo String.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT String.o -MD -MP -MF "$depbase.Tpo" -c -o String.o ../../src/String.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo stmem.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT stmem.o -MD -MP -MF "$depbase.Tpo" -c -o stmem.o ../../src/stmem.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo store.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT store.o -MD -MP -MF "$depbase.Tpo" -c -o store.o ../../src/store.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo StoreFileSystem.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT StoreFileSystem.o -MD -MP -MF "$depbase.Tpo" -c -o StoreFileSystem.o ../../src/StoreFileSystem.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo store_io.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT store_io.o -MD -MP -MF "$depbase.Tpo" -c -o store_io.o ../../src/store_io.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo StoreIOState.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT StoreIOState.o -MD -MP -MF "$depbase.Tpo" -c -o StoreIOState.o ../../src/StoreIOState.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo store_client.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT store_client.o -MD -MP -MF "$depbase.Tpo" -c -o store_client.o ../../src/store_client.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo store_digest.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT store_digest.o -MD -MP -MF "$depbase.Tpo" -c -o store_digest.o ../../src/store_digest.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo store_dir.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT store_dir.o -MD -MP -MF "$depbase.Tpo" -c -o store_dir.o ../../src/store_dir.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo store_key_md5.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT store_key_md5.o -MD -MP -MF "$depbase.Tpo" -c -o store_key_md5.o ../../src/store_key_md5.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo store_log.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT store_log.o -MD -MP -MF "$depbase.Tpo" -c -o store_log.o ../../src/store_log.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo store_rebuild.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT store_rebuild.o -MD -MP -MF "$depbase.Tpo" -c -o store_rebuild.o ../../src/store_rebuild.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo store_swapin.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT store_swapin.o -MD -MP -MF "$depbase.Tpo" -c -o store_swapin.o ../../src/store_swapin.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo store_swapmeta.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT store_swapmeta.o -MD -MP -MF "$depbase.Tpo" -c -o store_swapmeta.o ../../src/store_swapmeta.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo store_swapout.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT store_swapout.o -MD -MP -MF "$depbase.Tpo" -c -o store_swapout.o ../../src/store_swapout.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo StoreMeta.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT StoreMeta.o -MD -MP -MF "$depbase.Tpo" -c -o StoreMeta.o ../../src/StoreMeta.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo StoreMetaMD5.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT StoreMetaMD5.o -MD -MP -MF "$depbase.Tpo" -c -o StoreMetaMD5.o ../../src/StoreMetaMD5.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo StoreMetaSTD.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT StoreMetaSTD.o -MD -MP -MF "$depbase.Tpo" -c -o StoreMetaSTD.o ../../src/StoreMetaSTD.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo StoreMetaSTDLFS.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT StoreMetaSTDLFS.o -MD -MP -MF "$depbase.Tpo" -c -o StoreMetaSTDLFS.o ../../src/StoreMetaSTDLFS.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo StoreMetaUnpacker.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT StoreMetaUnpacker.o -MD -MP -MF "$depbase.Tpo" -c -o StoreMetaUnpacker.o ../../src/StoreMetaUnpacker.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo StoreMetaURL.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT StoreMetaURL.o -MD -MP -MF "$depbase.Tpo" -c -o StoreMetaURL.o ../../src/StoreMetaURL.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo StoreMetaVary.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT StoreMetaVary.o -MD -MP -MF "$depbase.Tpo" -c -o StoreMetaVary.o ../../src/StoreMetaVary.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo StoreStats.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT StoreStats.o -MD -MP -MF "$depbase.Tpo" -c -o StoreStats.o ../../src/StoreStats.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo StoreSwapLogData.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT StoreSwapLogData.o -MD -MP -MF "$depbase.Tpo" -c -o StoreSwapLogData.o ../../src/StoreSwapLogData.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo Server.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT Server.o -MD -MP -MF "$depbase.Tpo" -c -o Server.o ../../src/Server.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo SwapDir.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT SwapDir.o -MD -MP -MF "$depbase.Tpo" -c -o SwapDir.o ../../src/SwapDir.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo MemStore.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT MemStore.o -MD -MP -MF "$depbase.Tpo" -c -o MemStore.o ../../src/MemStore.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tools.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT tools.o -MD -MP -MF "$depbase.Tpo" -c -o tools.o ../../src/tools.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tunnel.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT tunnel.o -MD -MP -MF "$depbase.Tpo" -c -o tunnel.o ../../src/tunnel.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo unlinkd.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT unlinkd.o -MD -MP -MF "$depbase.Tpo" -c -o unlinkd.o ../../src/unlinkd.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo url.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT url.o -MD -MP -MF "$depbase.Tpo" -c -o url.o ../../src/url.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo URLScheme.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT URLScheme.o -MD -MP -MF "$depbase.Tpo" -c -o URLScheme.o ../../src/URLScheme.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo urn.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT urn.o -MD -MP -MF "$depbase.Tpo" -c -o urn.o ../../src/urn.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo wccp.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT wccp.o -MD -MP -MF "$depbase.Tpo" -c -o wccp.o ../../src/wccp.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo wccp2.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT wccp2.o -MD -MP -MF "$depbase.Tpo" -c -o wccp2.o ../../src/wccp2.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo whois.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT whois.o -MD -MP -MF "$depbase.Tpo" -c -o whois.o ../../src/whois.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo wordlist.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT wordlist.o -MD -MP -MF "$depbase.Tpo" -c -o wordlist.o ../../src/wordlist.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo LoadableModule.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT LoadableModule.o -MD -MP -MF "$depbase.Tpo" -c -o LoadableModule.o ../../src/LoadableModule.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo LoadableModules.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT LoadableModules.o -MD -MP -MF "$depbase.Tpo" -c -o LoadableModules.o ../../src/LoadableModules.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
/bin/sh ../../src/DiskIO/modules.sh AIO Blocking DiskDaemon DiskThreads IpcIo Mmapped > DiskIO/DiskIOModules_gen.cc
depbase=`echo err_type.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT err_type.o -MD -MP -MF "$depbase.Tpo" -c -o err_type.o err_type.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo err_detail_type.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT err_detail_type.o -MD -MP -MF "$depbase.Tpo" -c -o err_detail_type.o err_detail_type.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo globals.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT globals.o -MD -MP -MF "$depbase.Tpo" -c -o globals.o globals.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo hier_code.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT hier_code.o -MD -MP -MF "$depbase.Tpo" -c -o hier_code.o hier_code.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo icp_opcode.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT icp_opcode.o -MD -MP -MF "$depbase.Tpo" -c -o icp_opcode.o icp_opcode.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo lookup_t.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT lookup_t.o -MD -MP -MF "$depbase.Tpo" -c -o lookup_t.o lookup_t.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo repl_modules.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT repl_modules.o -MD -MP -MF "$depbase.Tpo" -c -o repl_modules.o repl_modules.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo swap_log_op.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT swap_log_op.o -MD -MP -MF "$depbase.Tpo" -c -o swap_log_op.o ../../src/swap_log_op.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
sed " s%@DEFAULT_ERROR_DIR@%<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share/errors%g;> s%@DEFAULT_MIME_TABLE@%<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/mime.conf%g;> s%@""PACKAGE_STRING""@%Squid Web Proxy 3.HEAD-BZR%g; s%@SYSCONFDIR@%<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc%g;> " < ../../src/squid.8.in > squid.8
depbase=`echo DiskIO/AIO/AIODiskFile.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT DiskIO/AIO/AIODiskFile.o -MD -MP -MF "$depbase.Tpo" -c -o DiskIO/AIO/AIODiskFile.o ../../src/DiskIO/AIO/AIODiskFile.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo DiskIO/AIO/AIODiskIOStrategy.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT DiskIO/AIO/AIODiskIOStrategy.o -MD -MP -MF "$depbase.Tpo" -c -o DiskIO/AIO/AIODiskIOStrategy.o ../../src/DiskIO/AIO/AIODiskIOStrategy.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo DiskIO/AIO/AIODiskIOModule.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT DiskIO/AIO/AIODiskIOModule.o -MD -MP -MF "$depbase.Tpo" -c -o DiskIO/AIO/AIODiskIOModule.o ../../src/DiskIO/AIO/AIODiskIOModule.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo DiskIO/Blocking/BlockingFile.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT DiskIO/Blocking/BlockingFile.o -MD -MP -MF "$depbase.Tpo" -c -o DiskIO/Blocking/BlockingFile.o ../../src/DiskIO/Blocking/BlockingFile.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo DiskIO/Blocking/BlockingIOStrategy.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT DiskIO/Blocking/BlockingIOStrategy.o -MD -MP -MF "$depbase.Tpo" -c -o DiskIO/Blocking/BlockingIOStrategy.o ../../src/DiskIO/Blocking/BlockingIOStrategy.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo DiskIO/Blocking/BlockingDiskIOModule.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT DiskIO/Blocking/BlockingDiskIOModule.o -MD -MP -MF "$depbase.Tpo" -c -o DiskIO/Blocking/BlockingDiskIOModule.o ../../src/DiskIO/Blocking/BlockingDiskIOModule.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo DiskIO/DiskDaemon/DiskdFile.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT DiskIO/DiskDaemon/DiskdFile.o -MD -MP -MF "$depbase.Tpo" -c -o DiskIO/DiskDaemon/DiskdFile.o ../../src/DiskIO/DiskDaemon/DiskdFile.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo DiskIO/DiskDaemon/DiskdIOStrategy.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT DiskIO/DiskDaemon/DiskdIOStrategy.o -MD -MP -MF "$depbase.Tpo" -c -o DiskIO/DiskDaemon/DiskdIOStrategy.o ../../src/DiskIO/DiskDaemon/DiskdIOStrategy.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo DiskIO/DiskDaemon/DiskDaemonDiskIOModule.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT DiskIO/DiskDaemon/DiskDaemonDiskIOModule.o -MD -MP -MF "$depbase.Tpo" -c -o DiskIO/DiskDaemon/DiskDaemonDiskIOModule.o ../../src/DiskIO/DiskDaemon/DiskDaemonDiskIOModule.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo DiskIO/DiskDaemon/DiskdAction.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT DiskIO/DiskDaemon/DiskdAction.o -MD -MP -MF "$depbase.Tpo" -c -o DiskIO/DiskDaemon/DiskdAction.o ../../src/DiskIO/DiskDaemon/DiskdAction.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo DiskIO/DiskThreads/aiops.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT DiskIO/DiskThreads/aiops.o -MD -MP -MF "$depbase.Tpo" -c -o DiskIO/DiskThreads/aiops.o ../../src/DiskIO/DiskThreads/aiops.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo DiskIO/DiskThreads/async_io.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT DiskIO/DiskThreads/async_io.o -MD -MP -MF "$depbase.Tpo" -c -o DiskIO/DiskThreads/async_io.o ../../src/DiskIO/DiskThreads/async_io.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo DiskIO/DiskThreads/DiskThreadsDiskFile.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT DiskIO/DiskThreads/DiskThreadsDiskFile.o -MD -MP -MF "$depbase.Tpo" -c -o DiskIO/DiskThreads/DiskThreadsDiskFile.o ../../src/DiskIO/DiskThreads/DiskThreadsDiskFile.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo DiskIO/DiskThreads/DiskThreadsDiskIOModule.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT DiskIO/DiskThreads/DiskThreadsDiskIOModule.o -MD -MP -MF "$depbase.Tpo" -c -o DiskIO/DiskThreads/DiskThreadsDiskIOModule.o ../../src/DiskIO/DiskThreads/DiskThreadsDiskIOModule.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo DiskIO/DiskThreads/DiskThreadsIOStrategy.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT DiskIO/DiskThreads/DiskThreadsIOStrategy.o -MD -MP -MF "$depbase.Tpo" -c -o DiskIO/DiskThreads/DiskThreadsIOStrategy.o ../../src/DiskIO/DiskThreads/DiskThreadsIOStrategy.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo DiskIO/IpcIo/IpcIoFile.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT DiskIO/IpcIo/IpcIoFile.o -MD -MP -MF "$depbase.Tpo" -c -o DiskIO/IpcIo/IpcIoFile.o ../../src/DiskIO/IpcIo/IpcIoFile.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo DiskIO/IpcIo/IpcIoIOStrategy.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -g -O2 -MT DiskIO/IpcIo/IpcIoIOStrategy.o -MD -MP -MF "$depbase.Tpo" -c -o DiskIO/IpcIo/IpcIoIOStrategy.o ../../src/DiskIO/IpcIo/IpcIoIOStrategy.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
cc1plus: warnings being treated as errors
../../src/DiskIO/IpcIo/IpcIoFile.cc: In member function ‘virtual void IpcIoClaimMemoryNeedsRr::run(const RunnerRegistry&)’:
../../src/DiskIO/IpcIo/IpcIoFile.cc:874: warning: passing ‘double’ for argument 2 to ‘void Ipc::Mem::NotePageNeed(int, int)’
make[4]: *** [DiskIO/IpcIo/IpcIoFile.o] Error 1
make[4]: *** Waiting for unfinished jobs....
make[4]: Leaving directory `<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_build/src'>
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory `<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_build/src'>
make[2]: *** [all] Error 2
make[2]: Leaving directory `<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_build/src'>
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `<http://build.squid-cache.org/job/3.HEAD-amd64-CentOS-5.3/ws/btlayer-00-default/squid-3.HEAD-BZR/_build'>
make: *** [distcheck] Error 2
buildtest.sh result is 2
BUILD: .././test-suite/buildtests/layer-00-default.opts
configure: BUILD LIBRARIES:
configure: BUILD EXTRA LIBRARIES: -lm -lnsl -lresolv -lrt -ldl -ldl
configure: BUILD OBJECTS:
configure: BUILD EXTRA OBJECTS:
configure: BUILD C FLAGS:
configure: BUILD EXTRA C FLAGS: -Wall -Wpointer-arith -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wcomments -Werror -pipe -D_REENTRANT
configure: BUILD C++ FLAGS: -g -O2
configure: BUILD EXTRA C++ FLAGS: -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT
configure: BUILD LIBRARIES:
configure: BUILD EXTRA LIBRARIES: -lm -lnsl -lresolv -lrt -ldl -ldl
configure: BUILD OBJECTS:
configure: BUILD EXTRA OBJECTS:
configure: BUILD C FLAGS:
configure: BUILD EXTRA C FLAGS: -Wall -Wpointer-arith -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wcomments -Werror -pipe -D_REENTRANT
configure: BUILD C++ FLAGS: -g -O2
configure: BUILD EXTRA C++ FLAGS: -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT
make[4]: *** [DiskIO/IpcIo/IpcIoFile.o] Error 1
make[3]: *** [all-recursive] Error 1
make[2]: *** [all] Error 2
make[1]: *** [all-recursive] Error 1
make: *** [distcheck] Error 2
Build FAILED.
Build step 'Execute shell' marked build as failure
Received on Fri Oct 28 2011 - 00:41:36 MDT
This archive was generated by hypermail 2.2.0 : Fri Oct 28 2011 - 12:00:11 MDT