See <http://build.squid-cache.org/job/3.1-matrix/./label=master/114/changes>
Changes:
[Amos Jeffries] 3.1.18
[Amos Jeffries] Regression: compile error in FTP
------------------------------------------
[...truncated 20866 lines...]
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT event.o -MD -MP -MF "$depbase.Tpo" -c -o event.o ../../src/event.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo EventLoop.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT EventLoop.o -MD -MP -MF "$depbase.Tpo" -c -o EventLoop.o ../../src/EventLoop.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo external_acl.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT external_acl.o -MD -MP -MF "$depbase.Tpo" -c -o external_acl.o ../../src/external_acl.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo ExternalACLEntry.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT ExternalACLEntry.o -MD -MP -MF "$depbase.Tpo" -c -o ExternalACLEntry.o ../../src/ExternalACLEntry.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo fd.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT fd.o -MD -MP -MF "$depbase.Tpo" -c -o fd.o ../../src/fd.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo fde.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT fde.o -MD -MP -MF "$depbase.Tpo" -c -o fde.o ../../src/fde.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo filemap.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT filemap.o -MD -MP -MF "$depbase.Tpo" -c -o filemap.o ../../src/filemap.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo forward.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT forward.o -MD -MP -MF "$depbase.Tpo" -c -o forward.o ../../src/forward.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo fqdncache.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT fqdncache.o -MD -MP -MF "$depbase.Tpo" -c -o fqdncache.o ../../src/fqdncache.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo ftp.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT ftp.o -MD -MP -MF "$depbase.Tpo" -c -o ftp.o ../../src/ftp.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo gopher.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT gopher.o -MD -MP -MF "$depbase.Tpo" -c -o gopher.o ../../src/gopher.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo helper.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT helper.o -MD -MP -MF "$depbase.Tpo" -c -o helper.o ../../src/helper.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo htcp.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT htcp.o -MD -MP -MF "$depbase.Tpo" -c -o htcp.o ../../src/htcp.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo http.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT http.o -MD -MP -MF "$depbase.Tpo" -c -o http.o ../../src/http.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo HttpStatusLine.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT HttpStatusLine.o -MD -MP -MF "$depbase.Tpo" -c -o HttpStatusLine.o ../../src/HttpStatusLine.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo HttpHdrCc.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT HttpHdrCc.o -MD -MP -MF "$depbase.Tpo" -c -o HttpHdrCc.o ../../src/HttpHdrCc.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo HttpHdrRange.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT HttpHdrRange.o -MD -MP -MF "$depbase.Tpo" -c -o HttpHdrRange.o ../../src/HttpHdrRange.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo HttpHdrSc.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT HttpHdrSc.o -MD -MP -MF "$depbase.Tpo" -c -o HttpHdrSc.o ../../src/HttpHdrSc.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo HttpHdrScTarget.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT HttpHdrScTarget.o -MD -MP -MF "$depbase.Tpo" -c -o HttpHdrScTarget.o ../../src/HttpHdrScTarget.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo HttpHdrContRange.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT HttpHdrContRange.o -MD -MP -MF "$depbase.Tpo" -c -o HttpHdrContRange.o ../../src/HttpHdrContRange.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo HttpHeader.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT HttpHeader.o -MD -MP -MF "$depbase.Tpo" -c -o HttpHeader.o ../../src/HttpHeader.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo HttpHeaderTools.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT HttpHeaderTools.o -MD -MP -MF "$depbase.Tpo" -c -o HttpHeaderTools.o ../../src/HttpHeaderTools.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo HttpBody.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT HttpBody.o -MD -MP -MF "$depbase.Tpo" -c -o HttpBody.o ../../src/HttpBody.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo HttpMsg.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT HttpMsg.o -MD -MP -MF "$depbase.Tpo" -c -o HttpMsg.o ../../src/HttpMsg.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo HttpReply.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT HttpReply.o -MD -MP -MF "$depbase.Tpo" -c -o HttpReply.o ../../src/HttpReply.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo HttpRequest.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT HttpRequest.o -MD -MP -MF "$depbase.Tpo" -c -o HttpRequest.o ../../src/HttpRequest.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo HttpRequestMethod.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT HttpRequestMethod.o -MD -MP -MF "$depbase.Tpo" -c -o HttpRequestMethod.o ../../src/HttpRequestMethod.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo icp_v2.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT icp_v2.o -MD -MP -MF "$depbase.Tpo" -c -o icp_v2.o ../../src/icp_v2.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo icp_v3.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT icp_v3.o -MD -MP -MF "$depbase.Tpo" -c -o icp_v3.o ../../src/icp_v3.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo int.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT int.o -MD -MP -MF "$depbase.Tpo" -c -o int.o ../../src/int.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo internal.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT internal.o -MD -MP -MF "$depbase.Tpo" -c -o internal.o ../../src/internal.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo ipc.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT ipc.o -MD -MP -MF "$depbase.Tpo" -c -o ipc.o ../../src/ipc.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo ipcache.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT ipcache.o -MD -MP -MF "$depbase.Tpo" -c -o ipcache.o ../../src/ipcache.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo LeakFinder.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT LeakFinder.o -MD -MP -MF "$depbase.Tpo" -c -o LeakFinder.o ../../src/LeakFinder.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo list.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT list.o -MD -MP -MF "$depbase.Tpo" -c -o list.o ../../src/list.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo logfile.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT logfile.o -MD -MP -MF "$depbase.Tpo" -c -o logfile.o ../../src/logfile.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo main.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT main.o -MD -MP -MF "$depbase.Tpo" -c -o main.o ../../src/main.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo mem.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT mem.o -MD -MP -MF "$depbase.Tpo" -c -o mem.o ../../src/mem.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo mem_node.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT mem_node.o -MD -MP -MF "$depbase.Tpo" -c -o mem_node.o ../../src/mem_node.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo MemBuf.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT MemBuf.o -MD -MP -MF "$depbase.Tpo" -c -o MemBuf.o ../../src/MemBuf.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo MemObject.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT MemObject.o -MD -MP -MF "$depbase.Tpo" -c -o MemObject.o ../../src/MemObject.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo mime.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT mime.o -MD -MP -MF "$depbase.Tpo" -c -o mime.o ../../src/mime.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo mime_header.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT mime_header.o -MD -MP -MF "$depbase.Tpo" -c -o mime_header.o ../../src/mime_header.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo multicast.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT multicast.o -MD -MP -MF "$depbase.Tpo" -c -o multicast.o ../../src/multicast.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo neighbors.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT neighbors.o -MD -MP -MF "$depbase.Tpo" -c -o neighbors.o ../../src/neighbors.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo Packer.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT Packer.o -MD -MP -MF "$depbase.Tpo" -c -o Packer.o ../../src/Packer.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo Parsing.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT Parsing.o -MD -MP -MF "$depbase.Tpo" -c -o Parsing.o ../../src/Parsing.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo ProfStats.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT ProfStats.o -MD -MP -MF "$depbase.Tpo" -c -o ProfStats.o ../../src/ProfStats.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo pconn.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT pconn.o -MD -MP -MF "$depbase.Tpo" -c -o pconn.o ../../src/pconn.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo peer_digest.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT peer_digest.o -MD -MP -MF "$depbase.Tpo" -c -o peer_digest.o ../../src/peer_digest.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo peer_select.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT peer_select.o -MD -MP -MF "$depbase.Tpo" -c -o peer_select.o ../../src/peer_select.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo peer_sourcehash.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT peer_sourcehash.o -MD -MP -MF "$depbase.Tpo" -c -o peer_sourcehash.o ../../src/peer_sourcehash.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo peer_userhash.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT peer_userhash.o -MD -MP -MF "$depbase.Tpo" -c -o peer_userhash.o ../../src/peer_userhash.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo redirect.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT redirect.o -MD -MP -MF "$depbase.Tpo" -c -o redirect.o ../../src/redirect.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo referer.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT referer.o -MD -MP -MF "$depbase.Tpo" -c -o referer.o ../../src/referer.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo refresh.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT refresh.o -MD -MP -MF "$depbase.Tpo" -c -o refresh.o ../../src/refresh.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo RemovalPolicy.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT RemovalPolicy.o -MD -MP -MF "$depbase.Tpo" -c -o RemovalPolicy.o ../../src/RemovalPolicy.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo send-announce.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT send-announce.o -MD -MP -MF "$depbase.Tpo" -c -o send-announce.o ../../src/send-announce.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo snmp_core.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT snmp_core.o -MD -MP -MF "$depbase.Tpo" -c -o snmp_core.o ../../src/snmp_core.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo snmp_agent.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT snmp_agent.o -MD -MP -MF "$depbase.Tpo" -c -o snmp_agent.o ../../src/snmp_agent.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo SquidMath.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT SquidMath.o -MD -MP -MF "$depbase.Tpo" -c -o SquidMath.o ../../src/SquidMath.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo ssl_support.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT ssl_support.o -MD -MP -MF "$depbase.Tpo" -c -o ssl_support.o ../../src/ssl_support.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo stat.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT stat.o -MD -MP -MF "$depbase.Tpo" -c -o stat.o ../../src/stat.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo StatHist.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT StatHist.o -MD -MP -MF "$depbase.Tpo" -c -o StatHist.o ../../src/StatHist.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo String.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT String.o -MD -MP -MF "$depbase.Tpo" -c -o String.o ../../src/String.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo stmem.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT stmem.o -MD -MP -MF "$depbase.Tpo" -c -o stmem.o ../../src/stmem.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo store.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT store.o -MD -MP -MF "$depbase.Tpo" -c -o store.o ../../src/store.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo StoreFileSystem.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT StoreFileSystem.o -MD -MP -MF "$depbase.Tpo" -c -o StoreFileSystem.o ../../src/StoreFileSystem.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
../../src/store.cc: In member function ‘void StoreEntry::deferProducer(const RefCount<AsyncCall>&)’:
../../src/store.cc:376: error: no match for ‘operator<<’ in ‘std::operator<< [with _Traits = std::char_traits<char>](((std::basic_ostream<char, std::char_traits<char> >&)((std::ostream*)operator<<(((std::ostream&)((std::basic_ostream<char, std::char_traits<char> >*)std::operator<< [with _Traits = std::char_traits<char>](((std::basic_ostream<char, std::char_traits<char> >&)((std::basic_ostream<char, std::char_traits<char> >*)std::operator<< [with _Traits = std::char_traits<char>](((std::basic_ostream<char, std::char_traits<char> >&)((std::basic_ostream<char, std::char_traits<char> >*)std::operator<< [with _Traits = std::char_traits<char>](((std::basic_ostream<char, std::char_traits<char> >&)((std::basic_ostream<char, std::char_traits<char> >*)std::operator<< [with _Traits = std::char_traits<char>](((std::basic_ostream<char, std::char_traits<char> >&)((std::basic_ostream<char, std::char_traits<char> >*)((std::basic_ostream<char, std::char_traits<char> >*)std::operator<< [with _Traits = std::char_traits<char>](((std::basic_ostream<char, std::char_traits<char> >&)((std::basic_ostream<char, std::char_traits<char> >*)std::operator<< [with _Traits = std::char_traits<char>](((std::basic_ostream<char, std::char_traits<char> >&)((std::ostream*)Debug::getDebugOut())), ((const char*)"../../src/store.cc")))), ((const char*)"(")))->std::basic_ostream<_CharT, _Traits>::operator<< [with _CharT = char, _Traits = std::char_traits<char>](377))), ((const char*)") ")))), ((const char*)(& __FUNCTION__))))), ((const char*)": ")))), ((const char*)"Deferred producer call is allready set to: ")))), ((AsyncCall&)((AsyncCall*)((StoreEntry*)this)->StoreEntry::deferredProducer.RefCount<C>::operator* [with C = AsyncCall]()))))), ((const char*)", requested call: ")) << ((const RefCount<AsyncCall>*)producer)->RefCount<C>::operator* [with C = AsyncCall]()’
/usr/lib/gcc/x86_64-redhat-linux/4.1.2/../../../../include/c++/4.1.2/bits/ostream.tcc:67: note: candidates are: std::basic_ostream<_CharT, _Traits>& std::basic_ostream<_CharT, _Traits>::operator<<(std::basic_ostream<_CharT, _Traits>& (*)(std::basic_ostream<_CharT, _Traits>&)) [with _CharT = char, _Traits = std::char_traits<char>]
/usr/lib/gcc/x86_64-redhat-linux/4.1.2/../../../../include/c++/4.1.2/bits/ostream.tcc:78: note: std::basic_ostream<_CharT, _Traits>& std::basic_ostream<_CharT, _Traits>::operator<<(std::basic_ios<_CharT, _Traits>& (*)(std::basic_ios<_CharT, _Traits>&)) [with _CharT = char, _Traits = std::char_traits<char>]
/usr/lib/gcc/x86_64-redhat-linux/4.1.2/../../../../include/c++/4.1.2/bits/ostream.tcc:90: note: std::basic_ostream<_CharT, _Traits>& std::basic_ostream<_CharT, _Traits>::operator<<(std::ios_base& (*)(std::ios_base&)) [with _CharT = char, _Traits = std::char_traits<char>]
/usr/lib/gcc/x86_64-redhat-linux/4.1.2/../../../../include/c++/4.1.2/bits/ostream.tcc:241: note: std::basic_ostream<_CharT, _Traits>& std::basic_ostream<_CharT, _Traits>::operator<<(long int) [with _CharT = char, _Traits = std::char_traits<char>]
/usr/lib/gcc/x86_64-redhat-linux/4.1.2/../../../../include/c++/4.1.2/bits/ostream.tcc:264: note: std::basic_ostream<_CharT, _Traits>& std::basic_ostream<_CharT, _Traits>::operator<<(long unsigned int) [with _CharT = char, _Traits = std::char_traits<char>]
/usr/lib/gcc/x86_64-redhat-linux/4.1.2/../../../../include/c++/4.1.2/bits/ostream.tcc:102: note: std::basic_ostream<_CharT, _Traits>& std::basic_ostream<_CharT, _Traits>::operator<<(bool) [with _CharT = char, _Traits = std::char_traits<char>]
/usr/lib/gcc/x86_64-redhat-linux/4.1.2/../../../../include/c++/4.1.2/bits/ostream.tcc:125: note: std::basic_ostream<_CharT, _Traits>& std::basic_ostream<_CharT, _Traits>::operator<<(short int) [with _CharT = char, _Traits = std::char_traits<char>]
/usr/lib/gcc/x86_64-redhat-linux/4.1.2/../../../../include/c++/4.1.2/bits/ostream.tcc:157: note: std::basic_ostream<_CharT, _Traits>& std::basic_ostream<_CharT, _Traits>::operator<<(short unsigned int) [with _CharT = char, _Traits = std::char_traits<char>]
/usr/lib/gcc/x86_64-redhat-linux/4.1.2/../../../../include/c++/4.1.2/bits/ostream.tcc:183: note: std::basic_ostream<_CharT, _Traits>& std::basic_ostream<_CharT, _Traits>::operator<<(int) [with _CharT = char, _Traits = std::char_traits<char>]
/usr/lib/gcc/x86_64-redhat-linux/4.1.2/../../../../include/c++/4.1.2/bits/ostream.tcc:215: note: std::basic_ostream<_CharT, _Traits>& std::basic_ostream<_CharT, _Traits>::operator<<(unsigned int) [with _CharT = char, _Traits = std::char_traits<char>]
/usr/lib/gcc/x86_64-redhat-linux/4.1.2/../../../../include/c++/4.1.2/bits/ostream.tcc:288: note: std::basic_ostream<_CharT, _Traits>& std::basic_ostream<_CharT, _Traits>::operator<<(long long int) [with _CharT = char, _Traits = std::char_traits<char>]
/usr/lib/gcc/x86_64-redhat-linux/4.1.2/../../../../include/c++/4.1.2/bits/ostream.tcc:311: note: std::basic_ostream<_CharT, _Traits>& std::basic_ostream<_CharT, _Traits>::operator<<(long long unsigned int) [with _CharT = char, _Traits = std::char_traits<char>]
/usr/lib/gcc/x86_64-redhat-linux/4.1.2/../../../../include/c++/4.1.2/bits/ostream.tcc:361: note: std::basic_ostream<_CharT, _Traits>& std::basic_ostream<_CharT, _Traits>::operator<<(double) [with _CharT = char, _Traits = std::char_traits<char>]
/usr/lib/gcc/x86_64-redhat-linux/4.1.2/../../../../include/c++/4.1.2/bits/ostream.tcc:335: note: std::basic_ostream<_CharT, _Traits>& std::basic_ostream<_CharT, _Traits>::operator<<(float) [with _CharT = char, _Traits = std::char_traits<char>]
/usr/lib/gcc/x86_64-redhat-linux/4.1.2/../../../../include/c++/4.1.2/bits/ostream.tcc:384: note: std::basic_ostream<_CharT, _Traits>& std::basic_ostream<_CharT, _Traits>::operator<<(long double) [with _CharT = char, _Traits = std::char_traits<char>]
/usr/lib/gcc/x86_64-redhat-linux/4.1.2/../../../../include/c++/4.1.2/bits/ostream.tcc:407: note: std::basic_ostream<_CharT, _Traits>& std::basic_ostream<_CharT, _Traits>::operator<<(const void*) [with _CharT = char, _Traits = std::char_traits<char>]
/usr/lib/gcc/x86_64-redhat-linux/4.1.2/../../../../include/c++/4.1.2/bits/ostream.tcc:430: note: std::basic_ostream<_CharT, _Traits>& std::basic_ostream<_CharT, _Traits>::operator<<(std::basic_streambuf<_CharT, _Traits>*) [with _CharT = char, _Traits = std::char_traits<char>]
../../src/Debug.h:131: note: std::ostream& operator<<(std::ostream&, uint8_t)
../../src/ip/IpAddress.h:378: note: std::ostream& operator<<(std::ostream&, const IpAddress&)
../../src/String.cci:199: note: std::ostream& operator<<(std::ostream&, const String&)
../../src/base/AsyncCall.h:90: note: std::ostream& operator<<(std::ostream&, AsyncCall&)
../../src/DnsLookupDetails.h:26: note: std::ostream& operator<<(std::ostream&, const DnsLookupDetails&)
../../src/HttpRequestMethod.h:156: note: std::ostream& operator<<(std::ostream&, const HttpRequestMethod&)
../../src/mem_node.h:67: note: std::ostream& operator<<(std::ostream&, mem_node&)
make[4]: *** [store.o] Error 1
make[4]: *** Waiting for unfinished jobs....
make[4]: Leaving directory `<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_build/src'>
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory `<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_build/src'>
make[2]: *** [all] Error 2
make[2]: Leaving directory `<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_build/src'>
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `<http://build.squid-cache.org/job/3.1-matrix/./label=master/ws/btlayer-02-maximus/squid-3.1.18-BZR/_build'>
make: *** [distcheck] Error 2
buildtest.sh result is 2
BUILD: .././test-suite/buildtests/layer-02-maximus.opts
../../src/store.cc:376: error: no match for ‘operator<<’ in ‘std::operator<< [with _Traits = std::char_traits<char>](((std::basic_ostream<char, std::char_traits<char> >&)((std::ostream*)operator<<(((std::ostream&)((std::basic_ostream<char, std::char_traits<char> >*)std::operator<< [with _Traits = std::char_traits<char>](((std::basic_ostream<char, std::char_traits<char> >&)((std::basic_ostream<char, std::char_traits<char> >*)std::operator<< [with _Traits = std::char_traits<char>](((std::basic_ostream<char, std::char_traits<char> >&)((std::basic_ostream<char, std::char_traits<char> >*)std::operator<< [with _Traits = std::char_traits<char>](((std::basic_ostream<char, std::char_traits<char> >&)((std::basic_ostream<char, std::char_traits<char> >*)std::operator<< [with _Traits = std::char_traits<char>](((std::basic_ostream<char, std::char_traits<char> >&)((std::basic_ostream<char, std::char_traits<char> >*)((std::basic_ostream<char, std::char_traits<char> >*)std::operator<< [with _Traits = std::char_traits<char>](((std::basic_ostream<char, std::char_traits<char> >&)((std::basic_ostream<char, std::char_traits<char> >*)std::operator<< [with _Traits = std::char_traits<char>](((std::basic_ostream<char, std::char_traits<char> >&)((std::ostream*)Debug::getDebugOut())), ((const char*)"../../src/store.cc")))), ((const char*)"(")))->std::basic_ostream<_CharT, _Traits>::operator<< [with _CharT = char, _Traits = std::char_traits<char>](377))), ((const char*)") ")))), ((const char*)(& __FUNCTION__))))), ((const char*)": ")))), ((const char*)"Deferred producer call is allready set to: ")))), ((AsyncCall&)((AsyncCall*)((StoreEntry*)this)->StoreEntry::deferredProducer.RefCount<C>::operator* [with C = AsyncCall]()))))), ((const char*)", requested call: ")) << ((const RefCount<AsyncCall>*)producer)->RefCount<C>::operator* [with C = AsyncCall]()’
make[4]: *** [store.o] Error 1
make[3]: *** [all-recursive] Error 1
make[2]: *** [all] Error 2
make[1]: *** [all-recursive] Error 1
make: *** [distcheck] Error 2
Build FAILED.
Build step 'Execute shell' marked build as failure
Received on Sun Dec 04 2011 - 04:04:01 MST
This archive was generated by hypermail 2.2.0 : Wed Dec 07 2011 - 12:00:13 MST