See <http://build.squid-cache.org/job/3.2-matrix/./label=master/252/changes>
Changes:
[Amos Jeffries] Remove unnecessary stub_comm
------------------------------------------
[...truncated 29398 lines...]
cp ../../test-suite/test_tools.cc .
depbase=`echo tests/stub_StatHist.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/stub_StatHist.o -MD -MP -MF "$depbase.Tpo" -c -o tests/stub_StatHist.o ../../src/tests/stub_StatHist.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/stub_access_log.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/stub_access_log.o -MD -MP -MF "$depbase.Tpo" -c -o tests/stub_access_log.o ../../src/tests/stub_access_log.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/stub_cache_cf.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/stub_cache_cf.o -MD -MP -MF "$depbase.Tpo" -c -o tests/stub_cache_cf.o ../../src/tests/stub_cache_cf.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/stub_debug.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/stub_debug.o -MD -MP -MF "$depbase.Tpo" -c -o tests/stub_debug.o ../../src/tests/stub_debug.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/stub_DelayId.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/stub_DelayId.o -MD -MP -MF "$depbase.Tpo" -c -o tests/stub_DelayId.o ../../src/tests/stub_DelayId.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/stub_DiskIOModule.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/stub_DiskIOModule.o -MD -MP -MF "$depbase.Tpo" -c -o tests/stub_DiskIOModule.o ../../src/tests/stub_DiskIOModule.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/stub_errorpage.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/stub_errorpage.o -MD -MP -MF "$depbase.Tpo" -c -o tests/stub_errorpage.o ../../src/tests/stub_errorpage.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/stub_fd.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/stub_fd.o -MD -MP -MF "$depbase.Tpo" -c -o tests/stub_fd.o ../../src/tests/stub_fd.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/stub_HttpRequest.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/stub_HttpRequest.o -MD -MP -MF "$depbase.Tpo" -c -o tests/stub_HttpRequest.o ../../src/tests/stub_HttpRequest.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/stub_libcomm.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/stub_libcomm.o -MD -MP -MF "$depbase.Tpo" -c -o tests/stub_libcomm.o ../../src/tests/stub_libcomm.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/stub_MemObject.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/stub_MemObject.o -MD -MP -MF "$depbase.Tpo" -c -o tests/stub_MemObject.o ../../src/tests/stub_MemObject.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/stub_MemStore.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/stub_MemStore.o -MD -MP -MF "$depbase.Tpo" -c -o tests/stub_MemStore.o ../../src/tests/stub_MemStore.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/stub_mime.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/stub_mime.o -MD -MP -MF "$depbase.Tpo" -c -o tests/stub_mime.o ../../src/tests/stub_mime.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/stub_pconn.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/stub_pconn.o -MD -MP -MF "$depbase.Tpo" -c -o tests/stub_pconn.o ../../src/tests/stub_pconn.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/stub_store.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/stub_store.o -MD -MP -MF "$depbase.Tpo" -c -o tests/stub_store.o ../../src/tests/stub_store.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/stub_store_rebuild.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/stub_store_rebuild.o -MD -MP -MF "$depbase.Tpo" -c -o tests/stub_store_rebuild.o ../../src/tests/stub_store_rebuild.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/stub_store_stats.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/stub_store_stats.o -MD -MP -MF "$depbase.Tpo" -c -o tests/stub_store_stats.o ../../src/tests/stub_store_stats.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/stub_store_swapout.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/stub_store_swapout.o -MD -MP -MF "$depbase.Tpo" -c -o tests/stub_store_swapout.o ../../src/tests/stub_store_swapout.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/stub_tools.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/stub_tools.o -MD -MP -MF "$depbase.Tpo" -c -o tests/stub_tools.o ../../src/tests/stub_tools.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/stub_cache_manager.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/stub_cache_manager.o -MD -MP -MF "$depbase.Tpo" -c -o tests/stub_cache_manager.o ../../src/tests/stub_cache_manager.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/testACLMaxUserIP.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/testACLMaxUserIP.o -MD -MP -MF "$depbase.Tpo" -c -o tests/testACLMaxUserIP.o ../../src/tests/testACLMaxUserIP.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/testMain.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/testMain.o -MD -MP -MF "$depbase.Tpo" -c -o tests/testMain.o ../../src/tests/testMain.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo test_tools.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT test_tools.o -MD -MP -MF "$depbase.Tpo" -c -o test_tools.o test_tools.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/testBoilerplate.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/testBoilerplate.o -MD -MP -MF "$depbase.Tpo" -c -o tests/testBoilerplate.o ../../src/tests/testBoilerplate.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/testCacheManager.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/testCacheManager.o -MD -MP -MF "$depbase.Tpo" -c -o tests/testCacheManager.o ../../src/tests/testCacheManager.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/stub_main_cc.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/stub_main_cc.o -MD -MP -MF "$depbase.Tpo" -c -o tests/stub_main_cc.o ../../src/tests/stub_main_cc.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/stub_ipc_Forwarder.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/stub_ipc_Forwarder.o -MD -MP -MF "$depbase.Tpo" -c -o tests/stub_ipc_Forwarder.o ../../src/tests/stub_ipc_Forwarder.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/stub_acl.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/stub_acl.o -MD -MP -MF "$depbase.Tpo" -c -o tests/stub_acl.o ../../src/tests/stub_acl.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/stub_client_db.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/stub_client_db.o -MD -MP -MF "$depbase.Tpo" -c -o tests/stub_client_db.o ../../src/tests/stub_client_db.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/stub_client_side_request.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/stub_client_side_request.o -MD -MP -MF "$depbase.Tpo" -c -o tests/stub_client_side_request.o ../../src/tests/stub_client_side_request.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/stub_helper.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/stub_helper.o -MD -MP -MF "$depbase.Tpo" -c -o tests/stub_helper.o ../../src/tests/stub_helper.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/stub_HelperChildConfig.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/stub_HelperChildConfig.o -MD -MP -MF "$depbase.Tpo" -c -o tests/stub_HelperChildConfig.o ../../src/tests/stub_HelperChildConfig.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/stub_http.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/stub_http.o -MD -MP -MF "$depbase.Tpo" -c -o tests/stub_http.o ../../src/tests/stub_http.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/stub_icp.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/stub_icp.o -MD -MP -MF "$depbase.Tpo" -c -o tests/stub_icp.o ../../src/tests/stub_icp.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/stub_internal.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/stub_internal.o -MD -MP -MF "$depbase.Tpo" -c -o tests/stub_internal.o ../../src/tests/stub_internal.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/stub_ipc.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/stub_ipc.o -MD -MP -MF "$depbase.Tpo" -c -o tests/stub_ipc.o ../../src/tests/stub_ipc.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/stub_ipcache.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/stub_ipcache.o -MD -MP -MF "$depbase.Tpo" -c -o tests/stub_ipcache.o ../../src/tests/stub_ipcache.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/stub_libicmp.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/stub_libicmp.o -MD -MP -MF "$depbase.Tpo" -c -o tests/stub_libicmp.o ../../src/tests/stub_libicmp.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/stub_Port.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/stub_Port.o -MD -MP -MF "$depbase.Tpo" -c -o tests/stub_Port.o ../../src/tests/stub_Port.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/stub_store_client.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/stub_store_client.o -MD -MP -MF "$depbase.Tpo" -c -o tests/stub_store_client.o ../../src/tests/stub_store_client.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/stub_UdsOp.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/stub_UdsOp.o -MD -MP -MF "$depbase.Tpo" -c -o tests/stub_UdsOp.o ../../src/tests/stub_UdsOp.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/testDiskIO.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/testDiskIO.o -MD -MP -MF "$depbase.Tpo" -c -o tests/testDiskIO.o ../../src/tests/testDiskIO.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/testStoreSupport.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/testStoreSupport.o -MD -MP -MF "$depbase.Tpo" -c -o tests/testStoreSupport.o ../../src/tests/testStoreSupport.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/testEvent.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/testEvent.o -MD -MP -MF "$depbase.Tpo" -c -o tests/testEvent.o ../../src/tests/testEvent.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/testEventLoop.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/testEventLoop.o -MD -MP -MF "$depbase.Tpo" -c -o tests/testEventLoop.o ../../src/tests/testEventLoop.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/test_http_range.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/test_http_range.o -MD -MP -MF "$depbase.Tpo" -c -o tests/test_http_range.o ../../src/tests/test_http_range.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/stub_event.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/stub_event.o -MD -MP -MF "$depbase.Tpo" -c -o tests/stub_event.o ../../src/tests/stub_event.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/testHttpParser.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/testHttpParser.o -MD -MP -MF "$depbase.Tpo" -c -o tests/testHttpParser.o ../../src/tests/testHttpParser.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/testHttpReply.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/testHttpReply.o -MD -MP -MF "$depbase.Tpo" -c -o tests/testHttpReply.o ../../src/tests/testHttpReply.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/testHttpRequest.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/testHttpRequest.o -MD -MP -MF "$depbase.Tpo" -c -o tests/testHttpRequest.o ../../src/tests/testHttpRequest.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/testHttpRequestMethod.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/testHttpRequestMethod.o -MD -MP -MF "$depbase.Tpo" -c -o tests/testHttpRequestMethod.o ../../src/tests/testHttpRequestMethod.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/stub_comm.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/stub_comm.o -MD -MP -MF "$depbase.Tpo" -c -o tests/stub_comm.o ../../src/tests/stub_comm.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/stub_HttpReply.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/stub_HttpReply.o -MD -MP -MF "$depbase.Tpo" -c -o tests/stub_HttpReply.o ../../src/tests/stub_HttpReply.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/testStore.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/testStore.o -MD -MP -MF "$depbase.Tpo" -c -o tests/testStore.o ../../src/tests/testStore.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/testStoreEntryStream.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/testStoreEntryStream.o -MD -MP -MF "$depbase.Tpo" -c -o tests/testStoreEntryStream.o ../../src/tests/testStoreEntryStream.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/testStoreController.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/testStoreController.o -MD -MP -MF "$depbase.Tpo" -c -o tests/testStoreController.o ../../src/tests/testStoreController.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/testStoreHashIndex.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/testStoreHashIndex.o -MD -MP -MF "$depbase.Tpo" -c -o tests/testStoreHashIndex.o ../../src/tests/testStoreHashIndex.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/TestSwapDir.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/TestSwapDir.o -MD -MP -MF "$depbase.Tpo" -c -o tests/TestSwapDir.o ../../src/tests/TestSwapDir.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/testString.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/testString.o -MD -MP -MF "$depbase.Tpo" -c -o tests/testString.o ../../src/tests/testString.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/testURL.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/testURL.o -MD -MP -MF "$depbase.Tpo" -c -o tests/testURL.o ../../src/tests/testURL.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/testURLScheme.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/testURLScheme.o -MD -MP -MF "$depbase.Tpo" -c -o tests/testURLScheme.o ../../src/tests/testURLScheme.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/testConfigParser.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/testConfigParser.o -MD -MP -MF "$depbase.Tpo" -c -o tests/testConfigParser.o ../../src/tests/testConfigParser.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/stub_mem.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/stub_mem.o -MD -MP -MF "$depbase.Tpo" -c -o tests/stub_mem.o ../../src/tests/stub_mem.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/stub_stmem.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/stub_stmem.o -MD -MP -MF "$depbase.Tpo" -c -o tests/stub_stmem.o ../../src/tests/stub_stmem.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/testStatHist.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/testStatHist.o -MD -MP -MF "$depbase.Tpo" -c -o tests/testStatHist.o ../../src/tests/testStatHist.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/testRock.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/testRock.o -MD -MP -MF "$depbase.Tpo" -c -o tests/testRock.o ../../src/tests/testRock.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
depbase=`echo tests/testUfs.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`; \
if g++ -DHAVE_CONFIG_H -DDEFAULT_CONFIG_FILE=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc/squid.conf\"> -DDEFAULT_SQUID_DATA_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/share\"> -DDEFAULT_SQUID_CONFIG_DIR=\"<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_inst/etc\"> -I../.. -I../../include -I../../lib -I../../src -I../include -I../src -I/usr/include/libxml2 -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -MT tests/testUfs.o -MD -MP -MF "$depbase.Tpo" -c -o tests/testUfs.o ../../src/tests/testUfs.cc; \
then mv -f "$depbase.Tpo" "$depbase.Po"; else rm -f "$depbase.Tpo"; exit 1; fi
/bin/sh ../libtool --tag=CXX --mode=link g++ -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -g -o tests/testACLMaxUserIP -ldl cbdata.o ConfigOption.o ConfigParser.o DiskIO/ReadRequest.o DiskIO/WriteRequest.o ETag.o event.o filemap.o HelperChildConfig.o HttpHeader.o HttpHeaderTools.o HttpHdrContRange.o HttpHdrRange.o HttpHdrCc.o HttpHdrSc.o HttpHdrScTarget.o HttpMsg.o HttpRequestMethod.o int.o list.o mem_node.o Packer.o Parsing.o SquidMath.o StatCounters.o tests/stub_StatHist.o stmem.o String.o store_dir.o StoreIOState.o StoreMeta.o StoreMetaMD5.o StoreMetaSTD.o StoreMetaSTDLFS.o StoreMetaUnpacker.o StoreMetaURL.o StoreMetaVary.o StoreSwapLogData.o store_key_md5.o swap_log_op.o SwapDir.o tests/stub_access_log.o tests/stub_cache_cf.o tests/stub_debug.o tests/stub_DelayId.o tests/stub_DiskIOModule.o tests/stub_errorpage.o tests/stub_fd.o tests/stub_HttpRequest.o tests/stub_libcomm.o tests/stub_MemObject.o tests/stub_MemStore.o tests/stub_mime.o tests/stub_pconn.o tests/stub_store.o tests/stub_store_rebuild.o tests/stub_store_stats.o tests/stub_store_swapout.o tests/stub_tools.o tests/stub_cache_manager.o tests/testACLMaxUserIP.o tests/testMain.o time.o url.o URLScheme.o mem.o MemBuf.o wordlist.o test_tools.o globals.o auth/libacls.la ident/libident.la acl/libacls.la eui/libeui.la acl/libstate.la auth/libauth.la acl/libapi.la anyp/libanyp.la base/libbase.la libsquid.la ip/libip.la ../lib/libmisccontainers.la ../lib/libmiscencoding.la ../lib/libmiscutil.la -lrt -lpthread -lcppunit -ldl -lssl -lcrypto -L../compat -lcompat-squid -ldl -lm -lnsl -lresolv -lrt -ldl -ldl
libtool: link: g++ -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT -D_FILE_OFFSET_BITS=64 -g -O2 -g -o tests/testACLMaxUserIP cbdata.o ConfigOption.o ConfigParser.o DiskIO/ReadRequest.o DiskIO/WriteRequest.o ETag.o event.o filemap.o HelperChildConfig.o HttpHeader.o HttpHeaderTools.o HttpHdrContRange.o HttpHdrRange.o HttpHdrCc.o HttpHdrSc.o HttpHdrScTarget.o HttpMsg.o HttpRequestMethod.o int.o list.o mem_node.o Packer.o Parsing.o SquidMath.o StatCounters.o tests/stub_StatHist.o stmem.o String.o store_dir.o StoreIOState.o StoreMeta.o StoreMetaMD5.o StoreMetaSTD.o StoreMetaSTDLFS.o StoreMetaUnpacker.o StoreMetaURL.o StoreMetaVary.o StoreSwapLogData.o store_key_md5.o swap_log_op.o SwapDir.o tests/stub_access_log.o tests/stub_cache_cf.o tests/stub_debug.o tests/stub_DelayId.o tests/stub_DiskIOModule.o tests/stub_errorpage.o tests/stub_fd.o tests/stub_HttpRequest.o tests/stub_libcomm.o tests/stub_MemObject.o tests/stub_MemStore.o tests/stub_mime.o tests/stub_pconn.o tests/stub_store.o tests/stub_store_rebuild.o tests/stub_store_stats.o tests/stub_store_swapout.o tests/stub_tools.o tests/stub_cache_manager.o tests/testACLMaxUserIP.o tests/testMain.o time.o url.o URLScheme.o mem.o MemBuf.o wordlist.o test_tools.o globals.o auth/.libs/libacls.a ident/.libs/libident.a acl/.libs/libacls.a eui/.libs/libeui.a acl/.libs/libstate.a auth/.libs/libauth.a acl/.libs/libapi.a anyp/.libs/libanyp.a base/.libs/libbase.a ./.libs/libsquid.a ip/.libs/libip.a ../lib/.libs/libmisccontainers.a ../lib/.libs/libmiscencoding.a ../lib/.libs/libmiscutil.a -lpthread -lcppunit -lssl -lcrypto -L<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_build/compat> -lcompat-squid -lm -lnsl -lresolv -lrt -ldl
./.libs/libsquid.a(comm.o): In function `commHandleWriteHelper':
<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_build/src/../../src/comm.cc>:1503: undefined reference to `Comm::HandleWrite(int, void*)'
./.libs/libsquid.a(comm.o): In function `commStartSslClose(FdeCbParams const&)':
<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_build/src/../../src/comm.cc>:1035: undefined reference to `ssl_shutdown_method(ssl_st*)'
collect2: ld returned 1 exit status
make[5]: *** [tests/testACLMaxUserIP] Error 1
make[5]: *** Waiting for unfinished jobs....
make[5]: Leaving directory `<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_build/src'>
make[4]: *** [check-am] Error 2
make[4]: Leaving directory `<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_build/src'>
make[3]: *** [check-recursive] Error 1
make[3]: Leaving directory `<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_build/src'>
make[2]: *** [check] Error 2
make[2]: Leaving directory `<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_build/src'>
make[1]: *** [check-recursive] Error 1
make[1]: Leaving directory `<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_build'>
make: *** [distcheck] Error 2
buildtest.sh result is 2
BUILD: .././test-suite/buildtests/layer-02-maximus.opts
configure: BUILD LIBRARIES:
configure: BUILD EXTRA LIBRARIES: -ldl -lm -lnsl -lresolv -lrt -ldl -ldl
configure: BUILD OBJECTS:
configure: BUILD EXTRA OBJECTS:
configure: BUILD C FLAGS: -D_FILE_OFFSET_BITS=64 -Wall -g -O2
configure: BUILD EXTRA C FLAGS: -Wall -Wpointer-arith -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wcomments -Werror -pipe -D_REENTRANT
configure: BUILD C++ FLAGS: -D_FILE_OFFSET_BITS=64 -g -O2
configure: BUILD EXTRA C++ FLAGS: -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT
configure: BUILD LIBRARIES:
configure: BUILD EXTRA LIBRARIES: -ldl -lm -lnsl -lresolv -lrt -ldl -ldl
configure: BUILD OBJECTS:
configure: BUILD EXTRA OBJECTS:
configure: BUILD C FLAGS: -D_FILE_OFFSET_BITS=64 -Wall -g -O2
configure: BUILD EXTRA C FLAGS: -Wall -Wpointer-arith -Wwrite-strings -Wmissing-prototypes -Wmissing-declarations -Wcomments -Werror -pipe -D_REENTRANT
configure: BUILD C++ FLAGS: -D_FILE_OFFSET_BITS=64 -g -O2
configure: BUILD EXTRA C++ FLAGS: -I/usr/include/libxml2 -Wall -Wpointer-arith -Wwrite-strings -Wcomments -Werror -pipe -D_REENTRANT
<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_build/src/../../src/comm.cc>:1503: undefined reference to `Comm::HandleWrite(int, void*)'
<http://build.squid-cache.org/job/3.2-matrix/./label=master/ws/btlayer-02-maximus/squid-3.2.0.18-BZR/_build/src/../../src/comm.cc>:1035: undefined reference to `ssl_shutdown_method(ssl_st*)'
make[5]: *** [tests/testACLMaxUserIP] Error 1
make[4]: *** [check-am] Error 2
make[3]: *** [check-recursive] Error 1
make[2]: *** [check] Error 2
make[1]: *** [check-recursive] Error 1
make: *** [distcheck] Error 2
Build FAILED.
Build step 'Execute shell' marked build as failure
Received on Mon Jul 30 2012 - 21:20:59 MDT
This archive was generated by hypermail 2.2.0 : Wed Aug 01 2012 - 12:00:04 MDT