Re: Squid & MRTG possible?

From: Alan J. Flavell <flavell@dont-contact.us>
Date: Tue, 17 Nov 1998 22:53:27 +0000 (GMT)

On Tue, 17 Nov 1998, Glenn Chisholm wrote:

> > > You need to patch MRTG to get the data from the correct SNMP port

> > No, you don't need to patch it: you need to get the current version of
> > MRTG, and use its facilities for specifying the SNMP port
..
> In this case it seems that
> the port number has nothing to do with the error.

Please accept my apologies for the misunderstanding. I reacted only
to the reference to the SNMP port.

> You will need to change the entries for sysName/sysUptime to get
> this to work.

Adding an entry like this:

routerUpTime[target]: public@host.address

in the MRTG configuration works fine using the _host_ uptime and name,
(i.e it gets it from the host's standard SNMP port, assuming that you
have one), but I understand from your reply that there are other
things that still need to be patched.

> Squid does not respond for system group OID's so MRTG can not run.
> If you change these then you will have trouble monitoring any other
> devices. Of course you can always change them back after the first run.

This is always the problem with applying patches to MRTG. But if you
add new configuration options instead, I am sure the author would like
to see them, and perhaps put them into the package as distributed.

Once again, my apologies for the misunderstanding.
Received on Tue Nov 17 1998 - 15:41:18 MST

This archive was generated by hypermail pre-2.1.9 : Tue Dec 09 2003 - 16:43:08 MST