Re: SNMP With 2.3S1

On Mon, 31 Jan 2000, Jeff Beley wrote:

> What parameters must I enable to get SNMP running properly under 2.3S1? I
> have the following options enabled:
> acl snmppublic snmp_community public
> snmp_port 3401
> snmp_access allow snmppublic all
>
> And when I do an snmpwalk I get the following:
> jbeley@intrepid:~$ snmpwalk -m mib.txt -p 3401 proxy community
> End of MIB
>
> The proxy is on my local subnet with no filters to my network.

Hmmm. I also tripped over that one. I got the attached squid.mib file
from somewhere (forgotten where - at my age the short term memory ...
uh, what was I ... :). This file should be referenced in the particular
.cfg file as the MIB (I suppose you're using mrtg ...)

My entry in 'squid.cfg' reads
LoadMIBs: /usr/local/mrtg/mibs/squid.mib

There is also file called squid.txt in the ~/doc directory of the mrtg
distribution which will give you some potentially useful info as well.

Peter Kooiman | Voice : +27-12-547-2846
                                        | Cell : +27-82-321-3339
Box 81214, DOORNPOORT, 0017, RSA | e-mail : pko@paradigm-sa.com