Re: access my home banking

Hi Sergio,

I would suggest to modify it like this

function FindProxyForURL(url, host)

 {

         if (isInNet(host, "127.0.0.1", "255.255.255.255") ) {
                return "DIRECT";
        }

             if (isPlainHostName(host))
                return "DIRECT";
             else
                 return "PROXY proxy_server.my.domain:port; DIRECT";
 }

This may solve the problem you are experiencing IF the home banking system
requires running another (java) application together with your browser

A typical scheme here in Belgium is:

(a) (Client browser)
        |
        | http through localhost (127.0.0.1)
        V
(b) (Module for encryption/authentification)
        |
        | http(s) through proxy
        V
(c) (Home banking site on www)

Remark: (b) may get the proxy authentification from your browser or it must be
set manually: check the documentation of your home banking client, it should be
mentioned somewhere.

HTH

Paul

"Sergio Henrique Oliveira Pereira (EDB)" wrote:
>
> Hi Paul,
>
> all my clients are automatic proxy configuration with proxy.pac file. And
> all my clients are trouble for attempt connection.
> my proxy.pac file is:
> function FindProxyForURL(url, host)
> {
> if (isPlainHostName(host))
> return "DIRECT";
> else
> return "PROXY proxy_server.my.domain:port; DIRECT";
> }
>
> any ideia ?
>
> -----Original Message-----
> Difficult to say without some more details, but from my experience the
> client
> proxy configuration could be the problem (as was the case with my
> home-banking
> software):
>
> if the java (applet or application?) needs to pass through a module which
> is
> also launched on your client machine (eg for bullet proof encryption), it is
> usually done with a http connection through "localhost". So if your http
> traffic
> is configured to always use the squid proxy, this scenario fails as
> "localhost"
> means your client machine, not the squid proxy.
>
> If this is the case, than you should set "no proxy for" to include
> "localhost"
> or 127.0.0.1 in your browser/java application and maybe also set the proxy
> to
> squid for this local module.
>
> Alternatively, this has to be set in your proxy.pac file if you use
> automatic
> proxy configuration.
>
> Hope this helps a little
>
> Paul
>
> "Sergio Henrique Oliveira Pereira (EDB)" wrote:
> >
> > Hi all,
> >
> > I'm a problem here. When I try access my home banking (Java
> > application) I don't get load the full application. So, my squid is
> > 2.2.STABLE5 and can anybody help me?
> > thanks,
> > ______________________________________
> > Sergio Henrique Oliveira Pereira
> > Technology Consultant
> > e-mail: sergio.pereira@edb.ericsson.se
> > Contact: 55 11 6224-8624
> > MObile : 55 11 9119-9819
> >