"unsubscribe"

squid-users-digest-request@ircache.net wrote:

> Subject:
>
> squid-users-digest Digest Volume 00 : Issue 295
>
> Today's Topics:
> Re: Problems with squid and ipchains [ Ruprecht Helms <helms@internolix.co ]
> How to change "Your cache administra [ "Steve Snyder" <swsnyder@home.com> ]
> Configure Squid to show bogus versio [ "=?iso-8859-1?Q?Jo=E3o_Paulo_Legat? ]
> Re: WARNING: Closing open FD / Disk [ "Alejandro Ramirez" <ales@megared.n ]
> Re: How to change "Your cache admini [ "Alejandro Ramirez" <ales@megared.n ]
> Re: Squid behind a Watchguard Firebo [ Russell Mosemann <mose@ns.cune.edu> ]
> Configure Squid to show bogus versio [ "=?iso-8859-1?Q?Jo=E3o_Paulo_Legat? ]
> Re: How to change "Your cache admini [ "Steve Snyder" <swsnyder@home.com> ]
> Re: Problems with squid and ipchains [ Joao Neves <joao@fabricadeideias.co ]
> More details on ipchains and Squid [ =?iso-8859-1?B?Q29vcmRlbmHn428gZG9z ]
> Squid & FreeBsd., [ "Ahsan Khan" <ahsank@one.net.pk> ]
> Re: Configure Squid to show bogus ve [ Wojciech Puchar <wojtek@wojtek.from ]
> Re: Squid & FreeBsd., [ "Alejandro Ramirez" <ales@megared.n ]
> User lists [ Gustavo Palacios <gpalacios@petroec ]
> Re: User lists [ Matthew <matthew@penguinpowered.com ]
> Re: User lists [ "John F. Navratil" <navratil@netrop ]
> Extremely Transparent Proxy [ "Diegmueller, Jason (I.T. Dept)" <d ]
> ftp client & squid [ Pat Lendon <plendon@microelectronic ]
> Re: User lists [ Matthew <matthew@penguinpowered.com ]
> Re: User lists [ Wojciech Puchar <wojtek@wojtek.from ]
> verifying from shadow file [ "Blaine Grady" <blaine.grady@harves ]
> G2 Real Player and squid. [ Yomler <yomler.squid@fnac.net> ]
>
> ----------------------------------------------------------------
>
> Subject: Re: Problems with squid and ipchains
> Date: Wed, 31 May 2000 17:26:03 +0200
> From: Ruprecht Helms <helms@internolix.com>
>
> o: Coordenação dos LaboratóriosYXTzcmlvcw == <labinfo@unifacs.br>,<squid-users-digest@ircache.net>
>
> CC: <squid-users@ircache.net>
>
> Hi,
> >
> >This is my first question in this list and belive me, it's a newbye
> >question.How to do Squid and Named run in the same machine using transparent
> >proxy? I'm using this command for transparent proxy:
> >
> >ipchains -A input -p TCP -d 0/0 www -j REDIRECT 3128
> ^
> why
>
> I think you must build this in the inputchain and make a accept on the
> wanted host and Port
> and than you write it to to the forwardchain to redirect to the wanted host
> and the wanted port
>
> Regards,
> Ruprecht
>
> ------------------------------------------------------------
>
> INTERNOLIX AG
> Ruprecht Helms
> Systemadministrator
>
> http://www.internolix.com
> mailto:helms@internolix.com
> Weiherstr. 20 Tel: +49-[0]7533-9945-71
> 78465 Konstanz Fax: +49-[0]7533-9945-79
>
> ----------------------------------------------------------------
>
> Subject: How to change "Your cache administrator is" in error page?
> Date: Wed, 31 May 2000 10:51:27 -0500 (CST)
> From: "Steve Snyder" <swsnyder@home.com>
> To: "Squid Mailing List" <squid-users@ircache.net>
>
> When Squid (version 2.3S3) generates an error page, it says:
>
> Your cache administrator is root
>
> That's because I have problem reports mailed to the root account.
> What I want, though, is to have the message be displayed to users as a
> real name, not an e-mail account.
>
> Is it possible to keep "root" as the administrator, but display a real
> name on Squid's errors pages?
>
> Thank you.
>
>
> *** Steve Snyder ***
>
> ----------------------------------------------------------------
>
> Subject: Configure Squid to show bogus version
> Date: Wed, 31 May 2000 13:34:21 -0400
> From: "João Paulo Legat" <jplegat@br.alpnet.com>
> To: <squid-users-digest@ircache.net>Hi all,Anybody knows how to
> configure Squid to reply a bogus version when scanned by Nessus and
> other scanners ?Regards,JP
> ----------------------------------------------------------------
>
> Subject: Re: WARNING: Closing open FD / Disk space over limit errors
> Date: Wed, 31 May 2000 11:29:24 -0500
> From: "Alejandro Ramirez" <ales@megared.net.mx>
>
> o: "John F. Navratil" <navratil@netropolis.net>, <squid-users@ircache.net>
>
> > Running 2.3STABLE2, I began encountering the "WARNING: Closing open FD ##"
> error message and frequent Squid
> > crashes. Hoping this was the asynch I/O bug which was reportedly repaired
> in the STABLE3 release, I upgraded.
>
> > Now, in addition to that message, I am receiving "WARNING: Disk space over
> limit: 1317679 KB > 102400 KB"
> > message.
>
> > Squid is crashing every few minutes.
>
> >From a Duane Wessels mail to this list:
>
> The Squid-2.3.STABLE3 release contains a serious bug that causes your
> disks to fill up. If you're using this version, please visit the bugs
> page and download the patch for the "disk space over the limit" bug.
>
> http://www.squid-cache.org/Versions/v2/2.3/bugs/
>
> Duane W.
>
> ----------------------------------------------------------------
>
> Subject: Re: How to change "Your cache administrator is" in error page?
>
> Date: Wed, 31 May 2000 11:31:24 -0500
> From: "Alejandro Ramirez" <ales@megared.net.mx>
> To: "Steve Snyder" <swsnyder@home.com>,
> "Squid Mailing List" <squid-users@ircache.net>
>
> Change the cache_mgr line in squid.conf file to whichever user you want.
>
> Greetings...
> Ales
>
> ----- Original Message -----
> From: "Steve Snyder" <swsnyder@home.com>
> To: "Squid Mailing List" <squid-users@ircache.net>
> Sent: Wednesday, May 31, 2000 10:51 AM
> Subject: How to change "Your cache administrator is" in error page?
>
>
> > When Squid (version 2.3S3) generates an error page, it says:
> >
> > Your cache administrator is root
> >
> > That's because I have problem reports mailed to the root account.
> > What I want, though, is to have the message be displayed to users as a
> > real name, not an e-mail account.
> >
> > Is it possible to keep "root" as the administrator, but display a real
> > name on Squid's errors pages?
> >
> > Thank you.
> >
> >
> > *** Steve Snyder ***
>
> ----------------------------------------------------------------
>
> Subject: Re: Squid behind a Watchguard Firebox
> Date: Wed, 31 May 2000 11:34:14 -0500 (CDT)
> From: Russell Mosemann <mose@ns.cune.edu>
> To: Mark Puchalski <mp312@yahoo.com>
> CC: squid-users@ircache.net
>
> On Tue, 30 May 2000, Mark Puchalski wrote:
>
> > Anyone know if it's possible to run a squid server
> > behind a Watchguard Firebox? I can't get that config
> > to run.
>
> There is nothing inherent about Squid or a firewall that would prevent
> either from working together. You need to get onto the Squid machine and
> see if browser requests are actually reaching Squid. If they are, are
> requests from Squid then reaching the firewall?
>
> Russell Mosemann, Ph.D. * Computing Services * Concordia University, Nebraska
>
> ----------------------------------------------------------------
>
> Subject: Configure Squid to show bogus version
> Date: Wed, 31 May 2000 13:40:55 -0400
> From: "João Paulo Legat" <jplegat@br.alpnet.com>
> To: <squid-users@ircache.net>Hi All !Anybody knows how to configure
> Squid to show a bogus version when the server is scanned by Nessus and
> other security scanners ?Regards,JP
> ----------------------------------------------------------------
>
>
> ubject: Re: How to change "Your cache administrator is" in error page?
>
> Date: Wed, 31 May 2000 11:53:08 -0500 (CST)
> From: "Steve Snyder" <swsnyder@home.com>
> To: "Alejandro Ramirez" <ales@megared.net.mx>,
> "Squid Mailing List" <squid-users@ircache.net>
>
> According to squid.conf:
>
> # TAG: cache_mgr
> # Email-address of local cache manager who will receive
> # mail if the cache dies. The default is "webmaster."
>
> This not what I want. The e-mail address should remain "root". What
> I want to change is the *displayed* name.
>
>
> On Wed, 31 May 2000 11:31:24 -0500, Alejandro Ramirez wrote:
>
> >Change the cache_mgr line in squid.conf file to whichever user you want.
> >
> >Greetings...
> >Ales
> >
> >----- Original Message -----
> >From: "Steve Snyder" <swsnyder@home.com>
> >To: "Squid Mailing List" <squid-users@ircache.net>
> >Sent: Wednesday, May 31, 2000 10:51 AM
> >Subject: How to change "Your cache administrator is" in error page?
> >
> >
> >> When Squid (version 2.3S3) generates an error page, it says:
> >>
> >> Your cache administrator is root
> >>
> >> That's because I have problem reports mailed to the root account.
> >> What I want, though, is to have the message be displayed to users as a
> >> real name, not an e-mail account.
> >>
> >> Is it possible to keep "root" as the administrator, but display a real
> >> name on Squid's errors pages?
> >>
> >> Thank you.
> >>
> >>
> >> *** Steve Snyder ***
> >
> >
>
>
> *** Steve Snyder ***
>
> ----------------------------------------------------------------
>
> Subject: Re: Problems with squid and ipchains
> Date: Wed, 31 May 2000 14:43:31 -0300
> From: Joao Neves <joao@fabricadeideias.com>
> To: Coordenação dos Laboratórios <labinfo@unifacs.br>
> CC: squid-users-digest@ircache.net, squid-users@ircache.net
>
> Hi,
>
> You should use the redirect command in your 'forward' chain in order to have
> transparent proxying:
> 'ipchains -A forward -p tcp --dport 80 -j REDIRECT 3128'.
>
> Also what exactly goes wrong when you point DNS and gateway to the same machine?
>
> Joao.
>
> Coordenação dos Laboratórios wrote:
>
> > Hello guys,
> >
> > This is my first question in this list and belive me, it's a newbye
> > question.How to do Squid and Named run in the same machine using transparent
> > proxy? I'm using this command for transparent proxy:
> >
> > ipchains -A input -p TCP -d 0/0 www -j REDIRECT 3128
> > When I configure Windows 9x and I put gateway and DNS pointing to
> > differentmachines all goes right. But if both pointing to the same machine
> > (runningSquid and Named) everything goes wrong.
> >
> > Squid Version: 2.2 STABLE4
> > Distribution: Conectiva Linux 4.0(RedHat based)
> > Kernel Version: 2.2.13
> > Hardware: PC with PIII processorCould you help me, please?
> >
> > My best regards,
> >
> > Ricardo Freitas
> > labinfo@unifacs.br
> > System AdminUNIFACS
> > Universidade Salvador
> > Bahia - Brazil
> >
> > P.S.: I'm subscribed for squid-users-digest list.
>
> --
> -----------------------------------------------------------------
> Fabrica de Ideias
> sbs - ed. empire center - sala 109 - cep 70070-904 - brasilia-df
> tel: (61) 321 1357
> fax: (61) 321 6096
> joao@fabricadeideias.com
> -----------------------------------------------------------------
>
> ----------------------------------------------------------------
>
> Subject: More details on ipchains and Squid
> Date: Wed, 31 May 2000 14:39:51 -0300
> From: Coordenação dos Laboratórios <labinfo@unifacs.br>
> To: <helms@internolix.com>
> CC: <squid-users@ircache.net>
>
> Hi,
>
> I would like to thank u for your response in squid-users list but, could you
> be more specific giving me a example on how to do this?
>
> "I think you must build this in the inputchain and make a accept on the
> wanted host and Port and than you write it to to the forwardchain to
> redirect to the wanted host and the wanted port"
>
> Thank you again.
>
> Regards,
> Ricardo
>
> ----------------------------------------------------------------
>
> Subject: Squid & FreeBsd.,
> Date: Wed, 31 May 2000 22:46:13 +0500
> From: "Ahsan Khan" <ahsank@one.net.pk>
> To: <squid-users@ircache.net>
>
> Dear All,
>
>
> Any help for BSD in Transparent Proxy will be appreciated, I have
> used ipfw and recompile the kernal But no use can i get any help in this
> regard.?
>
> With Regards
> Ahsan Khan
> Sr. System Admin
> Internet Division (OneNet)
> Sun Communication Pvt. Ltd.
> Pakistan
> http://www.one.net.pk
>
> ----------------------------------------------------------------
>
> Subject: Re: Configure Squid to show bogus version
> Date: Wed, 31 May 2000 18:59:14 +0200 (CEST)
> From: Wojciech Puchar <wojtek@wojtek.from.pl>
> To: João Paulo Legat <jplegat@br.alpnet.com>
> CC: squid-users@ircache.net
>
> >
> > Anybody knows how to configure Squid to show a bogus version when the server
> simply change in sources to whatever you like
>
> ----------------------------------------------------------------
>
> Subject: Re: Squid & FreeBsd.,
> Date: Wed, 31 May 2000 13:20:19 -0500
> From: "Alejandro Ramirez" <ales@megared.net.mx>
> To: "Ahsan Khan" <ahsank@one.net.pk>, <squid-users@ircache.net>
>
> Hi,
>
> If you follow the procedure in setting up Transparent Proxy for FreeBSD,
> in the squid home page, it will work perfectly, if you have an specific
> problem during this configuration, tell me and I can help you out
>
>
> Greetings...
> Ales
>
> ----- Original Message -----
> From: "Ahsan Khan" <ahsank@one.net.pk>
> To: <squid-users@ircache.net>
> Sent: Wednesday, May 31, 2000 12:46 PM
> Subject: Squid & FreeBsd.,
>
>
> > Dear All,
> >
> >
> > Any help for BSD in Transparent Proxy will be appreciated, I have
> > used ipfw and recompile the kernal But no use can i get any help in this
> > regard.?
> >
> > With Regards
> > Ahsan Khan
> > Sr. System Admin
> > Internet Division (OneNet)
> > Sun Communication Pvt. Ltd.
> > Pakistan
> > http://www.one.net.pk
> >
> >
>
> ----------------------------------------------------------------
>
> Subject: User lists
> Date: Wed, 31 May 2000 13:30:47 -0500
> From: Gustavo Palacios <gpalacios@petroecuador.com.ec>
> To: Squid Users Mailing List <squid-users@ircache.net>
>
> Hi everybody
> I searching for a cgi or other script that extracts the userid of the
> passwd file because I need to get a list of users in a special group to
> give to them access to squid, i put the same group to them.
> user1:x:455:150:name:/home:/dev/null
> user2:x:456:150:name:/home:/dev/null
> I was traing with grep and cat but i can´t get the excat lenght of the
> uid for each one.
>
> Thanks in advance.
> --
> +-------------------------------------------------------------------+
> | Gustavo Palacios (Mr.) <gpalacios@petroecuador.com.ec>
> | Network Administrator <webmaster@petroecuador.com.ec>
> | PETROECUADOR
> | Empresa Estatal Petróleos del Ecuador
> | P.O. Box 17-11-5007, Quito, Ecuador
> | Phone: +593 (2) 563060, [Direct: +593 (2) 562502]
> | Fax: +593 (2) 503571
> | Cell: +593 (09) 844118
> | WWW => http://www.petroecuador.com.ec
> +-------------------------------------------------------------------+
> K E E P I N G Y O U I N T O U C H W I T H T H E W O R L D
>
> ----------------------------------------------------------------
>
> Subject: Re: User lists
> Date: Wed, 31 May 2000 19:05:50 +0100 (BST)
> From: Matthew <matthew@penguinpowered.com>
> To: Gustavo Palacios <gpalacios@petroecuador.com.ec>
> CC: Squid Users Mailing List <squid-users@ircache.net>
>
> On Wed, 31 May 2000, Gustavo Palacios wrote:
>
> > Hi everybody
> > I searching for a cgi or other script that extracts the userid of the
> > passwd file because I need to get a list of users in a special group to
> > give to them access to squid, i put the same group to them.
> > user1:x:455:150:name:/home:/dev/null
> > user2:x:456:150:name:/home:/dev/null
> > I was traing with grep and cat but i can´t get the excat lenght of the
> > uid for each one.
>
> cat passwd | cut -d':' -f1
>
> ----------------------------------------------------------------
>
> Subject: Re: User lists
> Date: Wed, 31 May 2000 14:11:47 -0500
> From: "John F. Navratil" <navratil@netropolis.net>
> To: <squid-users@ircache.net>
>
> One (of many) ways is to grep for the group with
>
> grep ^.*\:.*\:.*\:150: </etc/passwd
>
> then pipe through sed to strip everything from the first ':' on:
>
> | sed 's/\:.*//g'
>
> This will give a list of users with the associated group.
>
> ----- Original Message -----
> From: Gustavo Palacios <gpalacios@petroecuador.com.ec>
> To: Squid Users Mailing List <squid-users@ircache.net>
> Sent: Wednesday, May 31, 2000 1:30 PM
> Subject: User lists
>
>
> > Hi everybody
> > I searching for a cgi or other script that extracts the userid of the
> > passwd file because I need to get a list of users in a special group to
> > give to them access to squid, i put the same group to them.
> > user1:x:455:150:name:/home:/dev/null
> > user2:x:456:150:name:/home:/dev/null
> > I was traing with grep and cat but i can´t get the excat lenght of the
> > uid for each one.
> >
> > Thanks in advance.
> > --
> > +-------------------------------------------------------------------+
> > | Gustavo Palacios (Mr.) <gpalacios@petroecuador.com.ec>
> > | Network Administrator <webmaster@petroecuador.com.ec>
> > | PETROECUADOR
> > | Empresa Estatal Petróleos del Ecuador
> > | P.O. Box 17-11-5007, Quito, Ecuador
> > | Phone: +593 (2) 563060, [Direct: +593 (2) 562502]
> > | Fax: +593 (2) 503571
> > | Cell: +593 (09) 844118
> > | WWW => http://www.petroecuador.com.ec
> > +-------------------------------------------------------------------+
> > K E E P I N G Y O U I N T O U C H W I T H T H E W O R L D
> >
> >
> >
>
> ----------------------------------------------------------------
>
> Subject: Extremely Transparent Proxy
> Date: Wed, 31 May 2000 14:39:43 -0500
> From: "Diegmueller, Jason (I.T. Dept)" <diegmuej@stifel.com>
> To: "'squid-users@ircache.net'" <squid-users@ircache.net>
>
> Squid Users--
>
> I have searched the archives, and can't seem to find anyone else who has
> looked at doing thing.
>
> I'm reasonably familiar with squid, and extremely familiar with Linux.
> The other day, I spent a few minutes setting up a Transparent Proxy. It
> worked great in testing, I'm now looking at things from a network design
> aspect.
>
> Our company is looking in to putting a squid machine in front of a HEAVILY
> loaded web server ("Intranet Server"). The web server connects directly
> to a Cisco Catalyst 5505 switch with both NICs utilizing HP's EtherChannel
> implementation ("EtherTeaming"). This effectively doubles bandwidth and
> provides hardware fault tolerance in a way on both the Catalyst (should a
> port go) and on the server (should a NIC go).
>
> My original plan (before I started really looking to squid as a transparent
> proxy) was to utilize Linux's bonding driver to achieve 200Mb to the Linux
> box, and 200Mb to the HP Server (thus, 4 NICs). Unfortunately, I'm limited
> to only one instance of the bonding.o driver. So I'll just do 200Mb to the
> switch, and 100Mb to the server. Not too big of a deal. If someone knows a
> workaround, let me know.
>
> The question comes in here:
> If I'm using a two-interface solution, obviously I'm going to have to route
> between the "outside" and the "inside" interface. If I do this, I'm
> seriously
> messing with addressing scheme of things here. I'd have to create a whole
> new IP network for this Intranet server, and somehow advetise it to the rest
> of my network (we use EIGRP, so I'd probably have to use zebra and
> redistribute RIPv2 in to EIGRP) .. it would be ugly.
>
> Another option I thought was that I could renumber the Intranet box, do
> ipmasq, and simply forward every single port to the Intranet machine. But
> again, that's reasonably "ugly".
>
> So is there any "clean" way to implement an almost INVISIBLE proxy server?
> Perhaps do bridging between the "outisde" and "inside" iterfaces, but still
> have the ability to hijack requests to TCP port 80 and deliver them to
> squid?
> Has anyone done anything like this before? If so, do share. If not, think
> I'm on the right path? Does this sound feasible?
>
> I'd just like to implement a squid proxy WITHOUT having to redesign a lot
> of things (and in the process piss of the systems team). I considered doing
> a route-map on the Cat5505's RSM but when I was playing around with that
> yesterday load went through the roof (this is an awfully busy Catalyst).
>
> Insight, thoughts, and expertise is appreciated. Thanks!
>
> ----------------------------------------------------------------
>
> Subject: ftp client & squid
> Date: Wed, 31 May 2000 23:59:55 -0400
> From: Pat Lendon <plendon@microelectronics.com>
> To: squid-users@ircache.net
>
> Hi,
>
> I am trying to get the ftp client WsFTP Pro to work thru Squid.
> WsFTP connects to the Squid system and port 3128. I receive a number
> of messages:
>
> connecting to (squid host ip) port 3128
> HTTP/1.0 408 Request Timeout
> Server: Squid/2.3.STABLe2
> Mime Version 1.0
> Content-Type: text/html
> Content-Lenght: 670
> X-Squid-Error: ERR_LIFETIME_EXP 0
> <Title> Error: The requested URL could not be retrieved </Title>
> While trying to retrieve the URL:
> <A HREF= "N?A"> N/A </A>
> The following error was encountered.
> Connection Lifetime Expired
> Squid terminated request becaue it has exceeded max connection lifetime.
>
> connection failed.
>
> I've set the squid.conf client_lifetime to 1 day.
>
> Is it possible for ftp clients to use the squid proxy?
>
> I've checked the Squid Faq (12.17) and the question "Can I make my
> regular FTP clients use a Squid cache?" is answered with 'Nope its not
> possible. Squid only accepts HTTP requests. It speaks FTP on the
> server side, but not on the client side."
>
> So, does this FAQ question/answer apply to what I am trying to
> accomplish with WSFTP Pro?
>
> Is wget the only FTP client that can use Squid?
>
> Thank you in advance.
>
> ----------------------------------------------------------------
>
> Subject: Re: User lists
> Date: Wed, 31 May 2000 19:52:06 +0100 (BST)
> From: Matthew <matthew@penguinpowered.com>
> To: Gustavo Palacios <gpalacios@petroecuador.com.ec>
> CC: Squid Users Mailing List <squid-users@ircache.net>
>
> On Wed, 31 May 2000, Matthew wrote:
>
> >
> >
> > On Wed, 31 May 2000, Gustavo Palacios wrote:
> >
> > > Hi everybody
> > > I searching for a cgi or other script that extracts the userid of the
> > > passwd file because I need to get a list of users in a special group to
> > > give to them access to squid, i put the same group to them.
> > > user1:x:455:150:name:/home:/dev/null
> > > user2:x:456:150:name:/home:/dev/null
> > > I was traing with grep and cat but i can´t get the excat lenght of the
> > > uid for each one.
> >
> > cat passwd | cut -d':' -f1
>
> sorry i meant
> cat passwd | cut -d':' -f1,4 | grep groupid
> where groupid is the id of the special 'group'
>
> ----------------------------------------------------------------
>
> Subject: Re: User lists
> Date: Wed, 31 May 2000 21:58:13 +0200 (CEST)
> From: Wojciech Puchar <wojtek@wojtek.from.pl>
> To: Matthew <matthew@penguinpowered.com>
> CC: Gustavo Palacios <gpalacios@petroecuador.com.ec>,
> Squid Users Mailing List <squid-users@ircache.net>
>
> > > uid for each one.
> >
> > cat passwd | cut -d':' -f1
> cut -d':' -f1 </etc/passwd
> :)
>
> ----------------------------------------------------------------
>
> Subject: verifying from shadow file
> Date: Wed, 31 May 2000 15:17:28 -0500
> From: "Blaine Grady" <blaine.grady@harvestservices.com>
> To: <squid-users@ircache.net>
>
> Searching through the archives I found someone say that you can use
> ncsa_auth to verify from /etc/shadow. I got this running on the command
> line (as root) and with Squid (but I had to make /etc/shadow readable by
> everyone - not good). Can pam_auth or getpwnam_auth verify from /etc/shadow
> without modifying its privileges? Using a custom htpasswd file is not
> feasible in my situation. When I ran pam_auth or getpwnam_auth from the
> command line (as root), I could not get them to verify valid usernames. I
> pointed them at /etc/shadow. Any ideas? Thanks.
>
> Blaine Grady
> Web Applications Developer
> Harvest Services
>
> ----------------------------------------------------------------
>
> Subject: G2 Real Player and squid.
> Date: Wed, 31 May 2000 22:29:43 +0200
> From: Yomler <yomler.squid@fnac.net>
> To: squid-users@ircache.net
>
> We are using Squid 22S5 to proxy http, without any patch since more than 6
> month.
>
> Clients use IE and G2 RealPlayer to surf the web. G2 is using the Squid
> http proxy to reach Internet.
>
> For example, on this URL :
> http://download.imix.com/download/topsongs.asp
>
> We can't preview any song (using the Preview, not the liquid Audio sign).
>
> Does any one with S 225 experienced the same problem ?
> Does any patch could be useful ?
>
> Thanks for your help, before I have to look more deeper with sniffing the wire.
>
> --
> Yomler.
>
Received on Wed May 31 2000 - 15:40:49 MDT