[squid-users] FW: Problems with WCCP after Squid upgrade

From: NextGen Support <support@dont-contact.us>
Date: Wed, 27 Jun 2001 16:27:52 +0200

> Hi,
>
> Up till this morning I had Squid 2.2.Stable5 running on Linux 2.2.12
> using WCCP v1 running with Cisco 3662 router.
>
> As we where having some problems with Hotmail, and some other small
> problems, I decided its time to upgrade the squid version to the
> latest. I downloaded the latest version 2.4.Stable1, today's version,
> and installed it. After I adjusted the squid.conf to the new squid
> version. I fired up squid, and its working with no errors at all,
> however although the Cisco is seeing the cache, the packets are being
> unassigned. However I try to browse from a machine, the requests are
> actually arriving to squid, as a squid error comes up saying invalid
> request etc. At this point I am lost.
>
> One thing which is puzzling me is the wccp version number in the squid
> conf. The default is 4, however as far as I know, only ver 1 and 2 yet
> exist. I tried all version possible from 1 to 4, with some different
> results, as follows:
>
> Version 1 & 2:
> WCCP-EVNT: Here_I_Am packet from xx.xx.xx.xx rejected; version
> mismatch
>
> Version 3 & 4:
> WCCP-EVNT: Here_I_Am packet from xx.xx.xx.xx w/bad rcvd_id 00000000
>
> On my Cisco 3662 the WCCP version configured is always 1.0
> The IOS version is Version 12.1(5)T
>
>
> Any help please? My cache is at the moment DEAD!!
>
> Best Regards,
> Joseph Cilia
> Managing Director
> NextGen.net Limited
> ------------------------------------------
> Mobile: (+356) 947 2319
> Tel: (+356) 419109
> Fax: (+356) 438948
> ICQ: 9415615
> E-mail: jcilia@nextgen.net.mt
> URL: <http://www.nextgen.net.mt>
> ------------------------------------------
>
Received on Wed Jun 27 2001 - 08:27:57 MDT

This archive was generated by hypermail pre-2.1.9 : Tue Dec 09 2003 - 17:00:51 MST