RE: [squid-users] Squid In Redhat 7.1

From: Shane T. Ferguson <shane@dont-contact.us>
Date: Sun, 19 Aug 2001 12:16:16 -0300

First machine I've installed it on was a PIII 450 with 1GB of RAM. Bought a
new Dell Poweredge (1Ghz processor, 1GB RAM - all new), RH7.1, squid 2.4S1,
upgraded to 2.4.5 kernel and having same problems.

I'm not certain I'm having bad RAM from two different vendors .. but you
never know -- I'll try yet more RAM. Thanks for the tip!

Shane

-----Original Message-----
From: Gerben Welter [mailto:gerben@brekelmans.com]
Sent: Sunday, August 19, 2001 12:06 PM
To: squid-users@squid-cache.org
Subject: RE: [squid-users] Squid In Redhat 7.1

At 11:45 8/19/2001 -0300, Shane T. Ferguson wrote:
>I've been running RH7.1, Squid 2.4S1 for past 4.5 weeks now. At first, I
>would get seg faults and it would die (hang) after few hours .. I
>installed GNU malloc, and it only seg faults and restarts after around 7-8
>days (though does this cleanly).
>
>Shane

My experiences are much better. I run Squid 2.4S1 with the latest patches
on three different boxen running RedHat 7.1 with different workloads.
Ranging from a PII-233 with 80 MB for home use to a dual Celeron-400 with
512 MB serving about 1700 users.

Never had a problem. All three boxen all performing rock solid. Only
downtime is with the occasional kernel upgrade.

Have you checked your problems aren't hardware related, like bad ram?

Grtz Gerben.
Received on Sun Aug 19 2001 - 09:20:11 MDT

This archive was generated by hypermail pre-2.1.9 : Tue Dec 09 2003 - 17:01:44 MST