Re: [squid-users] WCCP on Squid

If you are not sure then you have not done so.

I am not aware of a WCCP module for Solaris and I am not very familiar
with Solaris kernel level programming. Try asking on Squid-users to
see if there is anyone who have done so.

WCCP kernel modules have only been contributed for the FreeBSD and
Linux kernels.

Regards
Henrik

On Monday 24 June 2002 06.28, Amin Hassan wrote:
> Hi Henrik
> I am not sure, I dont know how to enable wccp support in kernel in
> solaris 2.6. Can you please guide me how to do this? your support
> will be highly appreciated. thanks
>
> Best Regards
> Amin
>
> -----Original Message-----
> From: Henrik Nordstrom [mailto:hno@marasystems.com]
> Sent: Saturday, June 22, 2002 7:36 PM
> To: Amin Hassan
> Subject: Re: [squid-users] WCCP on Squid
>
>
> And you have enabled the required WCCP support in your kernel?
> (variant of GRE encapsulation, but not the standard GRE)
>
> Regards
> Henrik
>
> On Saturday 22 June 2002 07.42, Amin Hassan wrote:
> > hi Henrik,
> > I have matched my squid and router configuration with FAQ, but
> > again facing same problem. Please have a look and let me know if
> > some thing is wrong
> >
> > SQUID CONFIGURATION
> > # more squid.conf
> > acl localnet src 10.6.0.0/255.0.0.0
> > http_access allow localnet
> >
> > http_port 8080
> >
> > httpd_accel_host virtual
> > httpd_accel_port 80
> > httpd_accel_with_proxy on
> > httpd_accel_uses_host_header on
> >
> > wccp_router 10.6.0.1
> >
> > # ipnat -l
> > List of active MAP/Redirect filters:
> > rdr hme0 0.0.0.0/0 port 80 -> 10.6.0.10 port 8080 tcp
> > rdr hme0 10.6.0.10/32 port 80 -> 10.6.0.10 port 80 tcp
> >
> > ROUTER CONFIGURATION
> >
> > conf t
> > ip wccp version 1
> > ip wccp web-cache
> > ip cef
> >
> > interface Ethernet0
> > ip address 10.6.0.1 255.255.0.0
> > no ip route-cache cef
> > no ip mroute-cache
> >
> > interface Serial2
> > ip unnumbered Ethernet0
> > ip wccp web-cache redirect out
> > encapsulation ppp
> > no ip route-cache
> > no ip mroute-cache
> >
> >
> > Regards
> > Amin
> >
> > -----Original Message-----
> > From: Henrik Nordstrom [mailto:hno@marasystems.com]
> > Sent: Saturday, June 22, 2002 2:34 AM
> > To: Amin Hassan; squid-users@squid-cache.org
> > Subject: Re: [squid-users] WCCP on Squid
> >
> >
> > See the Squid FAQ on WCCP.
> >
> > Regards
> > Henrik
> >
> > On Friday 21 June 2002 06.57, Amin Hassan wrote:
> > > Hi All,
> > > I am running squid-2.3STABLE4, and want to run wccp v1. I have
> > > configured my router and i can see router is redirecting wccp
> > > packets to squid. Now squid doesnot take any action. I have
> > > feelings, squid doesnot understand gre encapsulated packets
> > > which router is sending. May be gre module is missing or some
> > > thing like that... does any have any idea on this? any gre
> > > module is available for squid? input from all will be highly
> > > appreciated.
> > >
> > > Regards
> > > Amin Hassan
Received on Sun Jun 23 2002 - 23:02:52 MDT