Re: [squid-users] Problem with SQUID+ WCCP v2 + Cisco Router

Dear Hare,

is your transparent proxy working fine try to check
that I think then problem in your cache which is not
redirecint port 80 packet.

send us detail from router

show ip wccp webcache detail

best regards,
Masood Ahmad Shah
System Administrator
Fibre Net

--- hare ram <hareram@sol.net.in> wrote:
> Hi Farrukh
>
> you have to divert the traffic from interface
> WCCP does not do this automatic traffic diversion
> we need to mention what traffic to ( in/out) do .
>
> any way this is for information only
>
> thanks
> hare
> ----- Original Message -----
> From: "Farrukh Mahmood"
> <farrukh_mahmood@eworld.net.pk>
> To: "MASOOD AHMAD" <masoodnt10@yahoo.com>;
> <squid-users@squid-cache.org>
> Sent: Friday, January 10, 2003 7:03 PM
> Subject: Re: [squid-users] Problem with SQUID+ WCCP
> v2 + Cisco Router
>
>
> > hi
> >
> > if its wccp why should we have to redirect it from
> router cause wccp
> > itself say that "i m here" and broadcast this
> message to network when
> > he got reply from router from network its shown in
> router by this
> > command "sh ip wccp web cache detail" we never do
> any thing for
> > redirection on router if wccp is running , and
> according to my
> > knowledge there are no configuration for squid on
> wccp2 but i works
> > fine on wccp1 and u can find this configuration on
> squid site.
> >
> >
> > Regards
> > Farrukh Mahmood
> >
> > ----- Original Message -----
> > From: MASOOD AHMAD <masoodnt10@yahoo.com>
> > Date: Friday, January 10, 2003 5:53 pm
> > Subject: Re: [squid-users] Problem with SQUID+
> WCCP v2 + Cisco Router
> >
> > > your wccp seems to be working fine try to put
> redirect
> > > out on router external interface it can be
> serail
> > > instead fast ethernet 0/0 it will work...
> > >
> > > Best Regards,
> > > Masood Ahmad Shah
> > > System Administrator
> > > Fibre Net
> > >
> > > --- hare ram <hareram@sol.net.in> wrote:
> > > > any coments on this problem
> > > >
> > > > thanks
> > > > hare
> > > > ----- Original Message -----
> > > > From: "hare ram" <hareram@sol.net.in>
> > > > To: <squid-users@squid-cache.org>
> > > > Sent: Friday, January 10, 2003 2:03 PM
> > > > Subject: [squid-users] Problem with SQUID+
> WCCP v2 +
> > > > Cisco Router
> > > >
> > > >
> > > > > Hi all
> > > > >
> > > > > i am trying to deploy squid 2.5 version +
> WCCP v2
> > > > + cisco Router
> > > > >
> > > > > but i could not able to success
> > > > >
> > > > > my proxy running with transparent, tested
> working
> > > > fine
> > > > > but when i divert the traffic from cisco
> router
> > > > using wccp, i could not =
> > > > > able to see any traffic going via my cache
> server
> > > > >
> > > > > but iam able to see lot of redirect packets
> from
> > > > cisco
> > > > >
> > > > > any suggestion will be appriciated
> > > > >
> > > > > ###########my setup
> > > > >
> > > > > Redhat 8.0 with 2.4.18-19.8 kernal
> > > > > patched kernal with iptables 1.2.7 with
> Visolve
> > > > WCCP v2 Patch to kernal
> > > > > patched latest squid ver 2.5 also with the
> > > > recomended patch give from =
> > > > > this URL
> > > > >
> > > >
> > >
>
http://squid.visolve.com/developments/wccpv2_install.htm
> > > > >
> > > > > ###########My cisco config Looks Like this
> > > > >
> > > > > !
> > > > > ip subnet-zero
> > > > > no ip source-route
> > > > > ip wccp web-cache
> > > > > !
> > > > > !
> > > > > ip name-server z.z.z.z
> > > > > !
> > > > > no ip bootp server
> > > > > call rsvp-sync
> > > > > !
> > > > > !
> > > > > !
> > > > > !
> > > > > !
> > > > > interface FastEthernet0/0
> > > > > ip wccp webcache redirect out
> > > > > ip address y.y.y.y y.y.y.y
> > > > >
> > > > >
> > > > >
> > > > > ###########GATEWAY#show ip wccp web-cache
> detail
> > > > > WCCP Cache-Engine information:
> > > > > IP Address: x.x.x.x ( ip
> > > > address of cache Server)
> > > > > Protocol Version: 2.0
> > > > > State: Usable
> > > > > Initial Hash Info:
> > > > 00000000000000000000000000000000
> > > > >
> > > > 00000000000000000000000000000000
> > > > > Assigned Hash Info:
> > > > FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
> > > > > =
> > > > > FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
> > > > > Hash Allotment: 256 (100.00%)
> > > > > Packets Redirected: 1048
> > > > > Connect Time: 00:24:23
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > ########My squid.conf looks like this
> > > > >
> > > > >
> > > > > #######WCCP config with Squid
> > > > >
> > > > > wccp_router y.y.y.y
> > > > > wccp2_router y.y.y.y
> > > > >
> > > > >
> > > > > ###########My cache.log Looks Like this
> > > > >
> > > > >
> > > > > 2003/01/10 19:36:23| Accepting HTTP
> connections at
> > > > 0.0.0.0, port 3129, =
> > > > > FD 11.
> > > > > 2003/01/10 19:36:23| Accepting ICP messages
> at
> > > > 0.0.0.0, port 3130, FD =
> > > > > 12.
> > > > > 2003/01/10 19:36:23| Accepting SNMP messages
> on
> > > > port 3401, FD 13.
> > > > > 2003/01/10 19:36:23| Accepting WCCP messages
> on
> > > > port 2048, FD 14.
> > > > > 2003/01/10 19:36:23| Accepting WCCP v2
> messages on
> > > > port 2048, FD 15.
> > > > > 2003/01/10 19:32:10| Incoming
> WCCP2_I_SEE_YOU
> > > > received id =3D 868.
> > > > > 2003/01/10 19:32:10| Incoming
> WCCP2_I_SEE_YOU
> > > > member change =3D 17 =
> > > > > tmp=3D17.
> > > > > 2003/01/10 19:32:20| Incoming WCCP v2
> I_SEE_YOU
> > > > length 132.
> > > > > 2003/01/10 19:32:20| Incoming
> WCCP2_I_SEE_YOU
> > > > received id =3D 869.
> > > > > 2003/01/10 19:32:20| Incoming
> WCCP2_I_SEE_YOU
> > > > member change =3D 17 =
> > > > > tmp=3D17.
> > > > > 2003/01/10 19:32:31| Incoming WCCP v2
> I_SEE_YOU
>
=== message truncated ===

__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com
Received on Fri Jan 10 2003 - 23:52:49 MST