RE: [squid-users] hotmail problem

From: Raja R <r.raja@dont-contact.us>
Date: Thu, 27 Mar 2003 16:36:27 +0530

No .. it is not enabled. DO I need to enable it ?
Regards,
Raja.

-----Original Message-----
From: Henrik Nordstrom [mailto:hno@squid-cache.org]
Sent: Thursday, March 27, 2003 4:03 PM
To: r.raja@tatainfotech.com
Cc: 'Patrick Kwan'; squid-users@squid-cache.org
Subject: RE: [squid-users] hotmail problem

Have you enabled any HTTP anonymisation features in Squid?
(header_access in Squid-2.5).

Regards
Henrik

tor 2003-03-27 klockan 10.59 skrev Raja R:
> Yes, it works fine when I do not use squid and am behind the same NAT
> gateway. Ok, that indicates that NAT gateway is not blocking anything.
Right
> ?
> cache.log does not say anything ab't the hotmail requests. I am attaching
> the access log for hotmail requests . squid does not seem to be denying
> anything, but the page does not load, nor does it give any error . IT says
> "DONE" with no display. It always comes to
> http://login.passport.net/uilogin.srf?id=2 and gets DONE there .
> Pls. check and give hints to solve the problem. I am despo.
>
> Regards,
> Raja.
>
>
> -----Original Message-----
> From: Henrik Nordstrom [mailto:hno@squid-cache.org]
> Sent: Thursday, March 27, 2003 1:53 PM
> To: r.raja@tatainfotech.com; 'Patrick Kwan'
> Cc: squid-users@squid-cache.org
> Subject: Re: [squid-users] hotmail problem
>
>
> On Thursday 27 March 2003 08.21, Raja R wrote:
> > No. I tried .. doesn't help...but I have something interesting to
> > tell.. the same squid config works fine for hotmail when the proxy
> > is on a dial-up ISDN line but does not work if the proxy
> > is put behind a firewall with static NAT. So just wondering If i
> > have to allow some specific ports on the firewall to the proxy from
> > outside for hotmail to work. I am attaching a text file to give u
> > all clues to see where the problem is . This is the source of the
> > hotmail page when it says DONE. It clearly shows breakage..
> > Everytime it breaks there..even after refreshing (ctrl-refresh,
> > shift-refresh, etc) ..PLS. HELP
>
> Does it work if you do not use Squid, still behind the same NAT
> gateway?
>
> What does Squid access.log and cache.log say about the requests when
> it fails?
>
> Regards
> Henrik

--
Henrik Nordstrom <hno@squid-cache.org>
MARA Systems AB, Sweden
Received on Thu Mar 27 2003 - 03:58:20 MST

This archive was generated by hypermail pre-2.1.9 : Tue Dec 09 2003 - 17:14:22 MST