Re: [squid-users] trimming contents of access.log

From: Alex Sharaz <A.Sharaz@dont-contact.us>
Date: Thu, 05 Jun 2003 12:55:48 +0100

--On 05 June 2003 16:21 +0500 Ahmad Masood Shah <masood@ipsec.fibre.net.pk>
wrote:

> I'm not able to understat what information you want to fetch from your
> logss. If you want to fetch IP basis information from access log etcc then
> simple is that
>
> less access.log | grep youriphere
>
no i want to configure squid not to put entries in the access.log for HEAD
commands coming from the IP address associated with my server load
balancing box. Each cache generates a nightly access.log file that is about
20Mytes and anything I can do to trim some of the triivia out of it would
help
Alex

> --
>
> Best Regs,
> Masood Ahmad Shah
> System Administrator
>
> ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^
>| * * * * * * * * * * * * * * * * * * * * * * * *
>| Fibre Net (Pvt) Ltd. Lahore, Pakistan
>| Tel: +92-42-6677024
>| Mobile: +92-300-4277367
>| http://www.fibre.net.pk
>| * * * * * * * * * * * * * * * * * * * * * * * *
> ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^
> Unix is very simple, but it takes a genius to understand the simplicity.
> (Dennis Ritchie)
> "All I want is a few minutes alone with the source code for the universe
> and a quick recompile."
>
>
> ----- Original Message -----
> From: "Alex Sharaz" <A.Sharaz@hull.ac.uk>
> To: <squid-users@squid-cache.org>
> Sent: Thursday, June 05, 2003 4:12 PM
> Subject: [squid-users] trimming contents of access.log
>
>
>> hi all,
>>
>> quick question,
>>
>> I'm running a number of web caches connected to a foundry ServerIronxL
>> server load balancing device.
>> The ServerIron performs L7 health checks every 30 seconds ( which I'm
>> planning to reduce to about 109 secs)
>>
>> The only problem is that of course the access logs has got entries for
>> "HEAD" commands coming from the ServerIron.
>>
>> Is it possible to filter out either types of command or connection info
>> from particular IP addresses ?
>>
>> TIA
>> Alex
>>
>> Sent using Mulberry 3.01a
>>
>

Sent using Mulberry 3.01a
Received on Thu Jun 05 2003 - 06:07:11 MDT

This archive was generated by hypermail pre-2.1.9 : Tue Dec 09 2003 - 17:17:16 MST