[squid-users] Wccp and squid problem

Hi all squid users,

i am running sorry i was running squid +wccp v 2 for one moth and suddenly
there was a problem and my squid stoped responding, it was figured out that
the squid was working fine ( by using it as a proxy i check it) and only
problem was with the wccp module or wccp problem on the cisco router.Has
anybody faced the same situation, kindly tellme.

Presently i am running squid and redirecting the traffic from router with
the help of PBR (Policy Based routing).it is working fine but has his own
drawbacks.

So it is a kind request to all the developers who are researching on squid
to take care of this part of the squid to ( means connectivity with the
router), or we can just stop using wccp.

   Regards

   Sukhjit Singh
   Network Administrator
   Emmsons Infotech Ltd.
   SCO 13-14-15, Sec 34A,
   Chandigarh-160 022
   (Ph): +91 172 606664
   sukhjits@emmtel.com
   http://www.emmtel.com

----- Original Message -----
From: <ahuxtable@sola.com.au>
To: <squid-users@squid-cache.org>
Sent: Thursday, July 31, 2003 8:31 AM
Subject: [squid-users] Cache peer and never_direct

> Hi,
> After a little help. I have a setup here where I want to force all
> users to use a cache
> peer *except a few*.
>
> I am also using NTLM auth and NT Global group checking
>
> It seems to be partially working where the 'direct' users always go direct
> but the 'peered' users
> are only partialy using the peer (some requests are going direct).
>
> Squid.conf snippet:
>
#***************************************************************************
> ********************
> external_acl_type NT_global_group %LOGIN /usr/local/squid/libexec/wb_group
>
> acl DirectProxyUsers external NT_global_group <Group1>
> acl PeerProxyUsers external NT_global_group <Group2>
> acl password proxy_auth REQUIRED
>
> never_direct allow all
>
> always_direct allow DirectProxyUsers
>
> Http_access allow password PeerProxyUsers
> Http_access allow password DirectProxyUsers
>
>
#***************************************************************************
> ********************
>
> I have confirmed that the external ACL is working ok. If I remove the
> always_direct line then
> all requests go to the peer as expected. If I change the
'DirectProxyUsers'
> ACL to a standard 'SRC'
> or something then it also works as expected (just DirectProxyUsers go
> direct). Is there an issue with
> using an external helper with an always_direct or something?
>
> As it is, it seems that about 2 in 5 of requests from the users that match
> the 'PeerProxyUsers' ACL still
> Go direct. Why?
>
> Thanks in Advance,
> Andrew
>
Received on Wed Jul 30 2003 - 21:25:09 MDT