Re: [squid-users] delay pools and mrtg discrepancies v2

----- Original Message -----
From: Henrik Nordstrom <hno@squid-cache.org>
To: galle <galle@mecon.gov.ar>
Cc: Henrik Nordstrom <hno@squid-cache.org>; <squid-users@squid-cache.org>
Sent: Wednesday, March 24, 2004 1:03 PM
Subject: Re: [squid-users] delay pools and mrtg discrepancies v2

> On Wed, 24 Mar 2004, galle wrote:
>
> >
> > ----- Original Message -----
> > From: Henrik Nordstrom <hno@squid-cache.org>
> > To: galle <galle@mecon.gov.ar>
> > Cc: Henrik Nordstrom <hno@squid-cache.org>;
<squid-users@squid-cache.org>
> > Sent: Tuesday, March 23, 2004 9:12 PM
> > Subject: Re: [squid-users] delay pools and mrtg discrepancies v2
> >
> >
> > > On Tue, 23 Mar 2004, galle wrote:
> > >
> > > > squid -k parse -> say nothing. everything OK
> > > >
> > > > my delay pool settings:
> > > >
> > > > delay_pools 1
> > > > delay_class 1 1
> > > > delay_parameters 1 68000/68000
> > > > delay_access 1 allow all
> > >
> > > Looks good. This should give you approximately 68000 bytes/s (exacly
> > > 68000 on average).
> > >
> > > Have you used any strange configure options? There is some hack
options
> > > (with hack in their name) which can have odd effects...
> > >
> > > Regards
> > > Henrik
> >
> > I have not use any strange options!
> > this is the output of a squid -v:
> > Squid Cache: Version 2.5.STABLE3
> > configure
> >
options: --prefix=/usr/local/squid --enable-auth=basic --enable-snmp --enab
> > le-delay-pools
> >
> > should i use:
> > delay_parameters 1 68000/1
> > to strictly force the 68000 bytes/s ?
>
> No. this will result in some very odd rates... (this makes a bucket which
> can only holds 1 byte/s..)
>
> Regards
> Henrik

Is there a "recommended" value for the MAX part in the delay_parameters line
?
I mean...Is there a recommended size for the bucket ?
Or should i use the same number for the RESTORE and for the MAX parts
For example: 68000/68000, or 128000/128000.......

Thanks
Received on Wed Mar 24 2004 - 09:22:51 MST