RE: [squid-users]Segment Fault

Is jy dom ? ;)

tail -f /var/log/squid/cache.log

Run above command on proxy server. When the server stop again with segment
fault, you will see some log entry here.

Check your disk space, make sure the cache is not over filling the
partition.

Send that log report, or even do a

tail -100 /var/log/squid/cache.log, and send it.

Regards

Gert Brits
Senior Engineer
Technology Concepts
Tel +27 11 803 2169
Fax +27 11 803 2189
http://www.techconcepts.co.za

-----Original Message-----
From: engineer@hyperdigm.co.kr [mailto:engineer@hyperdigm.co.kr]
Sent: Wednesday, July 07, 2004 10:19 AM
To: squid-users@squid-cache.org
Subject: [squid-users]Segment Fault

 Hi all!
 I have one squid server and 35 client.
 Squid server sometimes die. I found log 'segment fault'
 then client can not connect server bit can ping to server.

 My server config is redhat 9.0 , squid stable 2.5
 Server Compaq ML330 667Mhz , 392 RAM , 9+36G HDD

 I configure server below

./configure --prefix=/usr/local/squid --sysconfdir=/usr/local/squid/etc --en
able-dl-malloc
 make
 main install

 How I fix it. help me!
Received on Wed Jul 07 2004 - 03:32:17 MDT