Re: [squid-users] tune up

From: Askar <askar@dont-contact.us>
Date: Mon, 30 May 2005 17:59:30 +0500

Wennie V. Lagmay wrote:

> Thank you very much Askar,
>
> Now it's the only the option --with-aufs-threads=1024 is not clear,
> what is this option and is 1024 value is ok, anybody can you please
> enlighten me?
>
> wennie

hi wennie,
                   I thinks you dont need to do anything fancy for aufs,
as i read in http://www.oreilly.com/catalog/squid/chapter/ch08.pdf

according to the author squid will autmatically starts thread depends on
number of cache_dir.

Table 8-1. Default number of threads for up to six cache directories
cache_dirs Threads
1 16
2 26
3 32

However for my 2 cache_dir I have ...
$ps -ef | grep squid | wc -l
31

of squid processes.

regards

>
> ----- Original Message ----- From: "Askar" <askar@askarali.info>
> To: <squid-users@squid-cache.org>
> Sent: Monday, May 30, 2005 3:39 PM
> Subject: Re: [squid-users] tune up
>
>
>> Wennie V. Lagmay wrote:
>>
>>> Ok if im going to recompile it again, i just start squid and it
>>> should be working again right?
>>
>>
>> yes
>>
>>> second if i recompile it --enable-storeio="aufs" do I need to
>>> enable --with-aufs-threads=1024 and is a 1024 value is ok?
>>
>>
>> I don't have defined -with-aufs-threads=1024 options while compiling
>> squid and its working just cool
>>
>>>
>>> during recompilation, can I let squid running? aftrer I recompile it
>>> I sould only issue a command squid -z and suid start am I right?
>>
>>
>> yep let squid serving clients, don't issue squid -z command no need
>> to do so. Before giving "make install" command for safty cp your
>> squid.conf file to another location if you want to reuse the same
>> squid.conf and then issue "make install" and place the squid.conf in
>> /usr/local/squid/etc, and change the cache_dir line only replace
>> diskd with aufs.
>> then shutdown the squid and restart it.
>>
>>>
>>> what is the posiblity that my squid will not start?
>>>
>> I'm sure it will start with no problem ;)
>>
>>> Thanks,
>>>
>>> Wennie
>>>
>>>
>>>
>>>
>>>> I'm affraid you have to recompile squid if you didnt enable aufs
>>>> eariler, you can check squid compilation option with "squid -v" ,
>>>> see if there "--enable-storeio=aufs,coss,diskd,ufs"
>>>> Again if you don't see aufs support then don't hestitate to
>>>> recompile squid.
>>>>
>>>> regards
>>>>
>>>> askar
>>>
>>>
>>>
>>>
>>>
>>
>
>
>
Received on Mon May 30 2005 - 06:59:33 MDT

This archive was generated by hypermail pre-2.1.9 : Wed Jun 01 2005 - 12:00:04 MDT