Re: [squid-users] how to

Maham u can also use these ports
for other mobil services in pakistan

iptables -A FORWARD -i eth0 -p tcp --dport 50005 -j ACCEPT# warid
telecome SMS
iptables -A FORWARD -i eth0 -p tcp --dport 51215 -j ACCEPT# mobilink SMS
iptables -A FORWARD -i eth0 -p tcp --dport 5002 -j ACCEPT# ufone SMS
iptables -A FORWARD -i eth0 -p tcp --dport 5000 -j ACCEPT # tango insta SMS

and Mr Asim Hafeez `1st off all tell us wich kind of downlink service
u are using if u are using proxy based downlink
then use cache_peer
let see u are using opensky
then its cache_peer would be link this

cache_peer 193.251.135.100 parent 8080 0 no-query
acl all src 0.0.0.0/.0.0.0.0
never_direct allow all
# 193.251.135.100 is opensky c3 transponders IP

On 6/13/05, Maham Nasim <maham.nasim@gmail.com> wrote:
> Hi Arfan
> i was having same problem i resolved that using
> iptables eth0 is my LAN interface eth1 is my bandwidth .give it a try
>
> regards
> Maham
>
>
> iptables -A FORWARD -i eth0 -p tcp --dport 51215 -j ACCEPT
>
> iptables -t nat -A POSTROUTING -o eth1 -j MASQUERADE
>
>
> On 6/12/05, Arfan Ahmad Rana <ahmeda@multinet.com.pk> wrote:
> > Dear Bilal
> > I have Linux box as gateway running squid on it, problem is that I can't
> > send SMS from any machine from network. Some body told me that I should open
> > SMS port from the Linux machine .can you please let me know that
> > procedure..... Either I should make change in squid or some thing
> > different
> >
> >
> > Regards
> > Arfan
> >
> > -----Original Message-----
> > From: Muhammad Bilal Ahmad [mailto:mbilal@worldcall.net.pk]
> > Sent: Sunday, June 12, 2005 1:06 PM
> > To: asim hafeez; squid-users@squid-cache.org
> > Subject: Re: [squid-users] how to
> >
> > my dear
> >
> > the squid proxy can work perfectly in this scenario
> > with the dvb u would be given a range of ips. usually 6 ips are given by ur
> > satellite provider. ur proxy and ur dvb should be of the same network(the
> > ips given to by ur satellite provider) you should give ur router secondry ip
> > from the same network.
> >
> > now u have the following scenario.
> > 1 ip assigned to router
> > 1 ip assigned to squid proxy machine
> > 1 ip assigned to ur dvb.
> >
> > remember all these 3 ips would be of the pool ur provider has given u.
> >
> > now assign the ip of router as the gateway of ur proxy.
> >
> > in the squid.conf u should make the acl and allow only ips which u have
> > bought for isp and deny any other ip so that the people should not use ur
> > bandwidth.
> >
> > thats all
> >
> > any other queries are welcom
> >
> > Kind Regards
> > Muhammad Bilal Ahmad
> > Network Eng.
> > ICT Department
> > WorldCALL Multimedia Pvt Ltd
> > 16-S Gulberg II Lahore, Pakistan
> > Off: 92 (42) 5877051-55
> >
> >
> > ----- Original Message -----
> > From: "asim hafeez" <asim.mcp@gmail.com>
> > To: <squid-users@squid-cache.org>
> > Sent: Sunday, June 12, 2005 4:38 AM
> > Subject: [squid-users] how to
> >
> >
> > > Dear
> > >
> > > I want to configure for donwlink.. (Satellite Dish)the basic purpose
> > > of mine is to make squid just as proxy server that'll just work from
> > > downlink... and the messenger services like msn and yahoo will be
> > > connected through uplink (by ISP) . So i want to know how to configure
> > > Squid NT to work as i want to ... Can any one let me know about it
> > > Please??
> > >
> > > Best Regards
> > > Asim Hafeez
> >
> >
>

-- 
Syed Kashif Ali Bukhari
Network Associate Asia Net
Cell :- +92-345-4244813 , +92-300-4295604
Ph +92-42-111-111-202 Fax +92-42-5840905
MSN:- kbukhari@msn.com ; kashif.bukhari@asia.net.pk
http://asia.net.pk , http://asiatec.biz