[squid-users] How to enable wccp using squid-2.6-PRE2?

Hi,

I've already download the newest version(squid-2.6.PRE2-20060609), but
don't know how to compile with both wccp and wccpv2 support.

At first, I fellow the instruction in squid.conf.default, which says

# TAG: wccp_router
# Note: This option is only available if Squid is rebuilt with the
# --enable-wccp option
#
# TAG: wccp2_router
# Use this option to define your WCCP ``home'' router for
# Squid.
#
#Default:
# wccp_router 0.0.0.0

so I add --enable-wccp while configure, then make and make install.
But squid can't recognize either "wccp_router" or "wccp2_route":

# sbin/squid -k parse
2006/06/09 17:43:39| parseConfigFile: line 127 unrecognized:
'wccp_router 192.168.1.254'

So I run configure with --help option, which says only --disable-wccp
and --enable-wccpv2 are available. Then I rebuild squid with
--enable-wccpv2, but still no help. "wccp_router" is still
unrecognized, and "wccp2_router" can recognize, but squid don't active
any wccp communication with the router.
Received on Fri Jun 09 2006 - 03:52:33 MDT