Re: [squid-users] NTLM auth syntax on squid-2.6.STABLE4

From: P D <sarcasmo2005@dont-contact.us>
Date: Wed, 1 Nov 2006 13:44:34 +0000

Thanks a million for the feedback.. That did the job!
<http://wiki.squid-cache.org/ConfigExamples/WindowsAuthenticationNTLM?highlight=%28ConfigExamples%29>

On 01/11/06, Adrian Chadd <adrian@creative.net.au> wrote:
> Check out the Wiki; I have a working ntlm_auth based squid-2.6 setup documented
> in ConfigExamples.
>
>
>
> Adrian
>
>
> On Wed, Nov 01, 2006, P D wrote:
> > Hi,
> > I'm trying to get squid (ver 2.6.STABLE4) setup on a RHEL4 environment.
> > I'm trying to get the squid setup to act as a transparent proxy, using
> > NTLM to log active-directory usernames. When I initalise the squid
> > cache (/usr/sbin/squid -z) everything works ok, but when I get to
> > starting up the squid program (/usr/sbin/squid) I'm getting a number
> > of warnings about the basicauthenticator helper..
> >
> > (squid): The basicauthenticator helpers are crashing too rapidly, need help!
> > squid[7978]: Squid Parent: child process 8112 exited due to signal 6
> > squid[7978]: Exiting due to repeated, frequent failures
> >
> > my first thought was to check the cache.log and got the following:
> >
> > helperStatefulOpenServers: Starting 15 'ntlm_auth' processes
> > helperOpenServers: Starting 15 'ntlm_auth' processes
> > Usage: (ntlm_auth) [OPTION...]
> >
> > which indicates that I've got my squid conf wrong...my squid.conf
> > looks like this
> >
> > auth_param ntlm program /usr/bin/ntlm_auth
> > --helper-protocol=squid-2.5-ntlmssp
> > auth_param ntlm children 15
> > auth_param ntlm keep_alive on
> > auth_param basic program /usr/bin/ntlm_auth
> > auth_param basic children 15
> > auth_param basic realm Squid proxy-caching web server
> > auth_param basic credentialsttl 2 hours
> > auth_param basic casesensitive off
> >
> > the problem I believe is down to the syntax of my ntlm_auth command.
> > I tried testing the ntlm_auth program directly (/usr/bin/ntlm_auth) to
> > see if I could find the problem.. I get the following back:
> > ./ntlm_auth --helper-protocol
> > username must be specified!
> >
> > I'm not sure what information I have to pass into the "./ntlm_auth
> > --helper-protocol..." line.
> > My thoughts were that "--helper-protocol=squid-2.5-ntlmssp" bit is
> > wrong, but I'm not sure what to put in... any assistance would be
> > gratefully appreciated.
> >
> > I have the samba side working ok, I have no problems in getting the
> > groups or user information from AD using "wbinfo" calls..
> >
> > thanks in advance
> >
> > PD
> >
> >
> >
> >
> > ./ntlm_auth --helper-protocol
> > username must be specified!
>
Received on Wed Nov 01 2006 - 06:44:40 MST

This archive was generated by hypermail pre-2.1.9 : Fri Dec 01 2006 - 12:00:02 MST