Re: [squid-users] WCCP Module for WCCP Version 2

From: Awie <awie@dont-contact.us>
Date: Thu, 15 Mar 2007 15:50:41 +0800

Martin,

Here is my modules in Squid box:

ip_wccp 1016 0 (unused)
ipt_REDIRECT 952 1 (autoclean)
iptable_nat 26022 1 (autoclean) [ipt_REDIRECT]
ip_conntrack 31832 0 (autoclean) [ipt_REDIRECT iptable_nat]
iptable_filter 1740 1 (autoclean)
ip_tables 15360 5 [ipt_REDIRECT iptable_nat iptable_filter]
tg3 63564 1

What modules do I miss?

Thx & Rgds,

Awie

----- Original Message -----
From: "Awie" <awie@nangura.net>
To: <martin.kobele@netsweeper.com>
Cc: <squid-users@squid-cache.org>
Sent: Thursday, March 15, 2007 15:40
Subject: Re: [squid-users] WCCP Module for WCCP Version 2

> Martin,
>
> I run command: "iptunnel add gre1 remote <my.router.ip.addr> local
> <my.squid.ip.addr> dev eth0" (without quotes)
>
> Then I got message below
>
> ioctl: No such device
>
> Would you tell me why I got it?
>
> Thx & Rgds,
>
> Awie
>
>
> ----- Original Message -----
> From: "Awie" <awie@computer.org>
> To: <martin.kobele@netsweeper.com>
> Cc: "Henrik Nordstrom" <henrik@henriknordstrom.net>;
> <squid-users@squid-cache.org>
> Sent: Thursday, March 15, 2007 14:22
> Subject: Re: [squid-users] WCCP Module for WCCP Version 2
>
>
> > > All I do is this:
> > >
> > > modprobe ip_wccp
> > > iptunnel add gre1 remote <RouterIP> local <LocalIP> dev eth0
> > > ifconfig gre1 127.0.0.2 up
> > >
> > > I do not load ip_gre.
> >
> >
> > Thanks for your suggestion Martin...
> >
> > The lines of :
> >
> > [ iptunnel add gre1 remote <RouterIP> local <LocalIP> dev eth0 ]
> > [ ifconfig gre1 127.0.0.2 up ]
> >
> > are something that I should try.
> >
> > Thanks.
> >
> > Awie
> >
> > >
> > > On Wednesday 14 March 2007 10:44, Awie wrote:
> > > > tis 2007-03-13 klockan 14:18 -0400 skrev Martin Kobele:
> > > > > Hi,
> > > > >
> > > > > yes, we use wccp 1.7 as well.
> > > > > Do you have your GRE tunnel set up?
> > > >
> > > > You can't mix ip_wccp and ip_gre. The kernel can only support one
GRE
> > > > implementation at a time. If you load both only one will be used
> > > > (probably the last loaded, but I am not sure).
> > > >
> > > >
> > > > <AW> Yes, it is correct.
> > > >
> > > > <AW> I will check the WCCP handshake in Linux or Cisco.
> > > >
> > > > Thx & Rgds,
> > > >
> > > > Awie
> > >
> > > --
> > > Martin Kobele
> > > Software Developer
> > > t. 519-826-5222 ext #224
> > > f. 519-826-5228
> > > martin.kobele@netsweeper.com
> > > Netsweeper Corporate Head Office
> > > 104 Dawson Road
> > > Guelph, Ontario
> > > N1H 1A7
> > >
>
>
Received on Thu Mar 15 2007 - 01:50:57 MDT

This archive was generated by hypermail pre-2.1.9 : Sat Mar 31 2007 - 13:00:02 MDT