Re: [squid-users] WCCP Module for WCCP Version 2

From: Awie <awie@dont-contact.us>
Date: Fri, 16 Mar 2007 21:43:41 +0800

Yes Martin, it is just like yours.

FYI, the Squid & Cisco was running with WCCPv1 very well. After getting
problem with hotmail.com, I want to upgrade to WCCPv2 that I heard it will
solve the problem

Thx & Rgds,

Awie

----- Original Message -----
From: "Martin Kobele" <martin.kobele@netsweeper.com>
To: "Awie" <awie@nangura.net>
Cc: <squid-users@squid-cache.org>
Sent: Friday, March 16, 2007 19:22
Subject: Re: [squid-users] WCCP Module for WCCP Version 2

> Hi Awie,
>
> how did you configure your outgoing interface on the cisco?
>
> There should be something like this:
>
> interface FastEthernet0/0
> ip address 192.168.3.21 255.255.255.0
> no ip directed-broadcast
> ip wccp web-cache redirect out
> no ip mroute-cache
>
> Regards,
> Martin
>
>
> On Friday 16 March 2007 05:14:17 Awie wrote:
> > Martin,
> >
> > Below are the report from Cisco router.
> >
> > Global WCCP information:
> > Router information:
> > Router Identifier: my.router.ip.addr
> > Protocol Version: 2.0
> >
> > Service Identifier: web-cache
> > Number of Cache Engines: 1
> > Number of routers: 1
> > Total Packets Redirected: 0
> > Redirect access-list: squid-wccp
> > Total Packets Denied Redirect: 702
> > Total Packets Unassigned: 0
> > Group access-list: squid-cache
> > Total Messages Denied to Group: 0
> > Total Authentication failures: 0
> >
> > WCCP Cache-Engine information:
> > Web Cache ID: my.squid.ip.addr
> > Protocol Version: 2.0
> > State: Usable
> > Initial Hash Info: 00000000000000000000000000000000
> > 00000000000000000000000000000000
> > Assigned Hash Info: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
> > FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
> > Hash Allotment: 256 (100.00%)
> > Packets Redirected: 0
> > Connect Time: 00:02:39
> >
> >
> > From information above, the Router has WCCP link to Squid box, am I
right?
> >
> > Thx & Rgds,
> >
> > Awie
> >
> >
> > ----- Original Message -----
> > From: "Awie" <awie@nangura.net>
> > To: "Martin Köbele" <martin.kobele@netsweeper.com>
> > Cc: "Henrik Nordstrom" <henrik@henriknordstrom.net>;
> > <squid-users@squid-cache.org>
> > Sent: Friday, March 16, 2007 13:58
> > Subject: Re: [squid-users] WCCP Module for WCCP Version 2
> >
> > > > Have you turned on full blown debug logging to see what is happening
or
> > >
> > > not
> > >
> > > > happening?
> > >
> > > Yes, the Linux has already modprobe ip_wccp as it was running WCCPv1.
> > >
> > > I captured the traffic to Squid box by using ethereal and I saw WCCP
2.0
> > > "Here I am & I see you". If the WCCP connection is establish, why is
it
> > > unable redirect?
> > >
> > > Please advise.
> > >
> > > Thx & Rgds,
> > >
> > > Awie
> > >
> > > > On Friday 16 March 2007 00:03:42 Awie wrote:
> > > > > > Thank you very much, Henrik!
> > > > > >
> > > > > > Awie, how is it going for you?
> > > > > >
> > > > > > Regards,
> > > > > > Martin
> > > > >
> > > > > Martin & Henrik,
> > > > >
> > > > > Thanks a lot for discussion but I become more confuse to choose
> >
> > ip_wccp
> >
> > > or
> > >
> > > > > ip_gre. From this topic I assume that ip_wccp still able to serve
> > >
> > > WCCPv2.
> > >
> > > > > Now I try ip_wccp (version 1.7) that resulting no packet be
> > > > > redirected
> > >
> > > to
> > >
> > > > > Squid box.
> > > > >
> > > > > As my kernel is 2.4.34 (currently, I have no plan to use 2.6.x
yet),
> > > > > I
> > >
> > > need
> > >
> > > > > your advise the better module I should use.
> > > > >
> > > > > Thx & Rgds,
> > > > >
> > > > > Awie
> > > > >
> > > > > > On Thursday 15 March 2007 10:54, Henrik Nordstrom wrote:
> > > > > > > tor 2007-03-15 klockan 09:55 -0400 skrev Martin Kobele:
> > > > > > > > So in 2.4.32, the GRE implementation does not support WCCP.
> > > > > > > > Ok, rebooted the box, ip_gre is built into the kernel,
loading
> > > > > > > > ip_wccp and I don't set up the GRE tunnel.
> > > > > > > >
> > > > > > > > Why/How does that work? It doesn't need the GRE tunnel.
> > > > > > > > Would it use the GRE tunnel if it was there?
> > > > > > >
> > > > > > > When you load ip_wccp it probably takes over as GRE protocol
> > >
> > > handler,
> > >
> > > > > > > effectively disabling ip_gre.
> > > > > > >
> > > > > > > Regards
> > > > > > > Henrik
> > > > > >
> > > > > > --
> > > > > > Martin Kobele
> > > > > > Software Developer
> > > > > > t. 519-826-5222 ext #224
> > > > > > f. 519-826-5228
> > > > > > martin.kobele@netsweeper.com
> > > > > > Netsweeper Corporate Head Office
> > > > > > 104 Dawson Road
> > > > > > Guelph, Ontario
> > > > > > N1H 1A7
> > > >
> > > > --
> > > > Martin Kobele
> > > > Developer
> > > > t. 519-826-5222 ext #224
> > > > f. 519-826-5228
> > > > martin.kobele@netsweeper.com
> > > > Netsweeper Corporate Head Office
> > > > 104 Dawson Road
> > > > Guelph, Ontario
> > > > N1H 1A7
>
>
>
> --
> Martin Kobele
> Developer
> t. 519-826-5222 ext #224
> f. 519-826-5228
> martin.kobele@netsweeper.com
> Netsweeper Corporate Head Office
> 104 Dawson Road
> Guelph, Ontario
> N1H 1A7
>
Received on Fri Mar 16 2007 - 07:44:09 MDT

This archive was generated by hypermail pre-2.1.9 : Sat Mar 31 2007 - 13:00:02 MDT