Re: [squid-users] Configuring Delay Pools in Squid

tor 2007-04-12 klockan 11:34 -0700 skrev selvi nandu:

> 1. Is it possible to use LDAP group based authentication with delay
> pools (meaning :- assigning LDAP group acls with delay pools already
> configured)? If so, which delay class (1 or 2 or 3) can be used?

Should work most of the time, provided the same acl is also evaluated in
http_access. Applies to all classes.

> 2. To limit bandwidth to the network and also to the individual users,
> delay class 3 can be used, right?

Yes, class 2 or 3 required depending on your network size.

> Here can i use A class network or
> only B class network should be used? And can i use the mixture of both
> A class and B class networks?

A class 3 delay pool assigns individual limits based on the last 16 bits
of the IP address. Two users in different networks but having the same
last 16 bits will share the same pool.

A class 2 delay pool assigns individual pools based on the last 8 bits
of the IP address.

Regards
Henrik