Re: [squid-users] WCCP / no return traffic on gre interface

From: Chad Harrelson <coinflasher@dont-contact.us>
Date: Thu, 10 May 2007 09:19:50 -0400

Hi Henrik, thanks for your continued help. I changed the GRE tunnel
end point and the wccp2_router statement to match the router id of
150.125.127.142 but now squid and the router don't negotiate. As you
can see here below, there is a mismatch in the I_See_You packet IDs.

May 10 13:12:39.011 GMT: WCCP-EVNT:S00: Here_I_Am packet from
150.125.125.185 w/bad rcv_id 00000000
May 10 13:12:39.011 GMT: WCCP-PKT:S00: Sending I_See_You packet to
150.125.125.185 w/ rcv_id 00000002
ULAN-ISSR#sh ip wccp web
ULAN-ISSR#sh ip wccp web-cache d
WCCP Cache-Engine information:
        Web Cache ID: 150.125.125.185
        Protocol Version: 2.0
        State: NOT Usable
        Redirection: L2
        Packet Return: L2
        Packets Redirected: 0
        Connect Time: 00:00:16
        Assignment: MASK

ULAN-ISSR#

Here's my squid.conf:
wccp2_router 150.125.127.142
wccp2_version 4
wccp2_rebuild_wait on
wccp2_forwarding_method 2
wccp2_return_method 2
wccp2_service standard 0

I have also tried forwarding/return_method of 1 with the same results.

Any thoughts?

Thanks again,

-- Chad

On 5/10/07, Henrik Nordstrom <henrik@henriknordstrom.net> wrote:
> ons 2007-05-09 klockan 15:27 -0400 skrev Chad Harrelson:
> > Wow. Thanks Henrik! This is the command that got it going:
> > echo 0 >/proc/sys/net/ipv4/conf/gre1/rp_filter
> >
> > I thought for sure that I had run across documentation that told me to
> > enable rp_filter. Oh, it's working now. Now on the WCCPv2....
> >
> > When I try enabling version 2 I get the following error while sniffing
> > my external interface:
> >
> > 15:17:12.108896 IP 150.125.125.185 > 150.125.127.142: ICMP
> > 150.125.125.185 protocol 47 port 34878 unreachable, length 84
>
> Sounds like the local/remote endpoint of your GRE tunnel does not match
> how the router encapsulates the intercepted traffic.
>
> > (150.125.127.142 is the automatic router ID that is displayed under: sh ip wccp)
>
>
> And is what you should use as router IP for WCCP (and GRE),.
>
> Regards
> Henrik
>
>
Received on Thu May 10 2007 - 07:19:56 MDT

This archive was generated by hypermail pre-2.1.9 : Fri Jun 01 2007 - 12:00:04 MDT