Re: [squid-users] squid not asking for authentication

From: Amos Jeffries <squid3_at_treenet.co.nz>
Date: Fri, 18 Jul 2008 13:58:18 +1200

ananttickoo wrote:
>
>
> ananttickoo wrote:
>> i am trying to set up a squid but its not asking for authentication.. were
>> am i going wrong i not able to find out
>> this is what i am doing
>>
>>
>> i am using UBUNTU
>>
>> NIC that i am using is having ip 192.168.7.253
>>
>> static ip-192.168.7.253
>> netmask-255.255.255.0
>> gateway address-192.168.7.254
>>
>> give my pc a name in host file
>> 192.168.7.253 = testmachine
>>
>> then install squid
>> 2}apt-get install squid-common
>> 3}apt-get install apache2-utils
>>
>> 4)then chown proxy:proxy /etc/squid/squid.conf
>> 5)now create user htpasswd -c /etc/squid/passwd garima
>> passwrd -garima
>> 6} chmod o+r /etc/squid/passwd
>> 7)then i do the setting squid.conf
>>
>> 1}auth_param basic program /usr/lib/squid/ncsa_users /etc/squid/passwd
>> auth_param basic children 5
>> auth_param basic realm SQUID s there
>> auth_param basic credtinal 2 hours
>> auth_param basic cassesitive 0ff
>> now acl list
>> 2}acl ncsa_users proxy_auth REQUIRED
>> acl internal_network src 192.168.7.253
>> acl password proxy_auth REQUIRED
>> now http turn
>> 3}http_access allow internal_network
>> http_access allow ncsa_users
>> http_access allow password
>> now save nd close this
>> 8}now http_port 3128
>> 9}now we have to rout the traffic
>> iptables -L
>> it will show firewalls are disable
>> 10}vi /etc/iptables.rules
>> now add
>> iptables -t nat -A PREROUTING -i eth0 -p tcp ---dport 80 -j REDIRECT
>> --to-port 3128
>> save and close this
>> 11)now do iptables-save > /etc/iptables.rules
>> 12) now to vi /etc/network/interfaces
>> 13)now /etc/init.d/squid restart
>> 14)now /etc/init.d/networking restart
>>
>>
>> its still not working ... not asking for password
>>
>>
>> were am i going wrong
>>
>
>
> only thing i have messed with is that i have redirected the port 80 to 3128.
> that has messed the whole thing up ...
>

Did you see my earlier reply?
   Standard Authentication cannot be done on intercepted requests.
Client either have knowledge of the proxy and authenticates, or doesn't.

Amos

-- 
Please use Squid 2.7.STABLE3 or 3.0.STABLE7
Received on Fri Jul 18 2008 - 01:58:08 MDT

This archive was generated by hypermail 2.2.0 : Fri Jul 18 2008 - 12:00:04 MDT