[squid-users] FW: ldap_auth problem,stuck!!

From: ali batuhan dayioglugil <batuhandayioglugil_at_hotmail.com>
Date: Wed, 6 Aug 2008 17:22:24 +0000

my mistake,after all usernames under the commands i entered my password of course
like
abdayioglugil BLANKSPACE pass

> From: batuhandayioglugil_at_hotmail.com
> To: henrik_at_henriknordstrom.net; squid-users_at_squid-cache.org
> Subject: ldap_auth problem,stuck!!
> Date: Wed, 6 Aug 2008 17:15:08 +0000
>
>
> Hi
>
> i confiugured a proxy server (squid 2.6.STABLE14) on a machine (with ubuntu gutsy 7.10) and it has two ethernet cards,one of them for the wan and the other one is for lan (university lan).From my home i can use my proxy server very well (cache,acl...).the second thing that i want to do is to reach the ldap server in university but i can't.
>
>
> i could never see 'OK' in the terminal,always 'ERR Success' or something else.
>
> i searched a lot in google and tried alot of commands before si configure squid.conf but nothing.to give you some info i'm writing those commands here,
>
> first of all i searched ldap server :
>
> bim @ bimproxy:~$ ldapsearch -x -b dc=gsu,dc=edu -h 10.99.1.1 uid=abdayioglugil
> # extended LDIF
> #
> # LDAPv3
> # base with scope subtree
> # filter: uid=abdayioglugil
> # requesting: ALL
> #
>
> # search reference
> ref: ldap://gsu.edu/CN=Configuration,DC=gsu,DC=edu
>
> # search result
> search: 2
> result: 0 Success
>
> # numResponses: 2
> # numReferences: 1
>
> and i got the dn here,with that dn i tried to connect ldap server with my username and pass,which i use in university network for authentication,but no results.
>
> if i use this command without username i see computers connected to university network and their dn are like:
> dn: DC=gsu-pc,DC=gsu.edu,CN=MicrosoftDNS,CN=System,DC=gsu,DC=edu
> the DC=gsu.edu,CN=MicrosoftDNS,CN=System,DC=gsu,DC=edupart is always the same (*)
>
> now here some commands and results that i got:
>
> bim @ bimproxy:~$ /usr/lib/squid/ldap_auth -b "dc=gsu,dc=edu" -f "uid=%s" 10.99.1.1
> abdayioglugil
> nothing
>
> bim @ bimproxy:~$ /usr/lib/squid/ldap_auth -b "dc=gsu,dc=edu" -f "uid=%s" -h 10.99.1.1
> abdayioglugil
> squid_ldap_auth: WARNING, LDAP search error 'Can't contact LDAP server'
> ERR Success
>
> i didn't understand this because the ip and dn are exactly correct
>
> bim @ bimproxy:~$ /usr/lib/squid/ldap_auth -b "dc=gsu,dc=edu" -h 10.99.1.1
> abdayioglugil
> ERR Success
>
> after these commands i tried dn (*) that the other pc in the network use :
>
> bim @ bimproxy:~$ /usr/lib/squid/ldap_auth -b "dc=gsu,dc=edu" -D "DC=gsu.edu,CN=MicrosoftDNS,CN=System,DC=gsu,DC=edu" -h 10.99.1.1
> abdayioglugil
> ERR Success
>
> that's a short summary of what i have done,i started to use squid about 2 months ago,learned a lot but not enough as always,if you have time i would be thankful for your help,i am really stuck in this subject.
>
> thanks
>
> batu
> _________________________________________________________________
> Live.com'u deneyin: çevrimiçi dünyanızı bir araya getirin; haberler, spor, hava durumu ve çok daha fazlası.
> http://www.live.com/getstarted

_________________________________________________________________
Live.com'u deneyin: çevrimiçi dünyanızı bir araya getirin; haberler, spor, hava durumu ve çok daha fazlası.
http://www.live.com/getstarted
Received on Wed Aug 06 2008 - 17:22:32 MDT

This archive was generated by hypermail 2.2.0 : Thu Aug 07 2008 - 12:00:02 MDT