RE: [squid-users] SquidGuard Replacement

I switched to ufdbguard and have been real pleased with it's performance
and support.

> -----Original Message-----
> From: Joseph L. Casale [mailto:JCasale_at_activenetwerx.com]
> Sent: Tuesday, January 06, 2009 2:58 PM
> To: 'Philipp Rusch - New Vision-IT'
> Cc: squid-users_at_squid-cache.org
> Subject: RE: [squid-users] SquidGuard Replacement
>
> >I'm using Squid3STABLE9 and SquidGuard 1.3 on three openSUSE10.3
boxes
> >and tested the URL you gave us above
> >without hanving any problems to access the TechNet site. So this must
> be
> >something with your specific setup.
> >What's the version of SG are you using ? Maybe you can post your
> problem
> >to http://www.squidguard.org/mailinglist.html
>
> Philipp,
> I am using Squid3STABLE9 and SquidGuard 1.3-1.el5.rf on a couple of
> CentOS 5
> boxes? My SquidGuard has only a local net defined with an acl blocking
> many shalla lists.
>
> My squid.conf is as follows:
>
> acl manager proto cache_object
> acl localhost src 127.0.0.1/32
> acl to_localhost dst 127.0.0.0/8
> acl localnet src 192.168.0.0/16 # RFC1918 possible internal network
> acl SSL_ports port 443
> acl Safe_ports port 80 # http
> acl Safe_ports port 21 # ftp
> acl Safe_ports port 443 # https
> acl Safe_ports port 70 # gopher
> acl Safe_ports port 210 # wais
> acl Safe_ports port 1025-65535 # unregistered ports
> acl Safe_ports port 280 # http-mgmt
> acl Safe_ports port 488 # gss-http
> acl Safe_ports port 591 # filemaker
> acl Safe_ports port 777 # multiling http
> acl CONNECT method CONNECT
> http_access allow manager localhost
> http_access deny manager
> http_access deny !Safe_ports
> http_access deny CONNECT !SSL_ports
> http_access allow localnet
> http_access allow localhost
> http_access deny all
> icp_access allow localnet
> icp_access deny all
> htcp_access allow localnet
> htcp_access deny all
> http_port 3128
> hierarchy_stoplist cgi-bin ?
> access_log /var/log/squid/access.log squid
> url_rewrite_program /usr/bin/squidGuard
> refresh_pattern ^ftp: 1440 20% 10080
> refresh_pattern ^gopher: 1440 0% 1440
> refresh_pattern (cgi-bin|\?) 0 0% 0
> refresh_pattern . 0 20% 4320
> icp_port 3130
> coredump_dir /var/spool/squid
>
> Both of my servers are independent with identical configs and exhibit
> the same
> behavior, how does your config compare?
> Thanks!
> jlc
>
>
Received on Wed Jan 07 2009 - 12:57:58 MST