[squid-users] WCCP configuration

OS - Fedor8
Kernal - 2.6.20
Cttproxy - 2.6.20
Cisco Router - IOS 12.4

We have compiled squid+Tproxy and it works fine. Tunelling has been
done between the squid machine and the router. We need to configure
WCCP.

The WCCP config in squid:-

wccp2_router xxx.xx.xxx.xxx
wccp_version 4
wccp2_forwarding_method 1
wccp2_return_method 1
wccp2_assignment_method 1
wccp2_service dynamic 80
wccp2_service_info 80 protocol=tcp flags=src_ip_hash priority=240
ports=80
wccp2_service dynamic 90
wccp2_service_info 90 protocol=tcp flags=dst_ip_hash,ports_source
priority=240 ports=80

Router Eth0 - connected to lan. Eth1 - connecte to squid.

Router WCCP Configuration.

Eth0 - ip wccp web-cache redirect out
         ip wccp web-cache redirect in

Eth1 - ip wccp redirect exclude in

We tried the above commands in all combination possible, interchanging
the commands but in vain. Internet just doesn't work in WCCP

sh ip wccp
Global WCCP information:
    Router information:
        Router Identifier: xxx.xx.xxx.x
        Protocol Version: 2.0

    Service Identifier: web-cache
        Number of Service Group Clients: 1
        Number of Service Group Routers: 1
        Total Packets s/w Redirected: 11336
          Process: 0
          Fast: 0
          CEF: 11336
        Redirect access-list: -none-
        Total Packets Denied Redirect: 0
        Total Packets Unassigned: 9198
        Group access-list: -none-
        Total Messages Denied to Group: 0
        Total Authentication failures: 0
        Total Bypassed Packets Received: 0

Is there any simple way of configuring WCCP. We have beating round the
bush all day long to configure wccp.
________________________________________________________________________
You are invited to Get a Free AOL Email ID. - http://webmail.aol.in
Received on Wed Jan 07 2009 - 13:48:06 MST