try out webmin and install squid rpm instead of binary code that way
it will be very easy for you .
On Wed, Feb 25, 2009 at 4:05 PM, Amos Jeffries <squid3_at_treenet.co.nz> wrote:
> jmaan_at_nits.ac.in wrote:
>>
>> *************************************************
>> This message has been scanned by IMSS NIT-Silchar
>>
>> Dear All Squid Users/Experts,
>>
>> Let me tell you the fact that I am just monitoring the activites of squid
>> proxy server, though I have not myself made it.
>>
>>
>> I would like to know a few things, if any one of you can kindly let me
>> know what basic things one must look into to make one squid proxy server ?
>
> http://wiki.squid-cache.org/SquidFaq
>
>>
>> What are the lines that I have to check/modify in squid.conf file ?
>
> see QUICKSTART info file in your install documentation.
>
>>
>> As of now the current df shows up the following status of the disk space
>> in my proxy server.
>>
>>
>>
>> [root_at_facu-pxy /]# df
>> Filesystem 1K-blocks Used Available Use% Mounted on
>> /dev/mapper/PrimaryVol-root
>> 19838052 9958860 8855192 53% /
>> /dev/mapper/PrimaryVol-home
>> 34756272 28916872 4045352 88% /home
>> /dev/mapper/PrimaryVol-var
>> 14855176 13219512 868896 94% /var
>> /dev/mapper/PrimaryVol-tmp
>> 4062912 139684 3713516 4% /tmp
>> /dev/sda1 101086 34837 61030 37% /boot
>> tmpfs 253424 12 253412 1% /dev/shm
>> [root_at_facu-pxy /]#
>>
>>
>>
>> As you can see the /var shows up 94% utilisation.
>>
>>
>> From my inspection, of the /var partition, I could see that, everything is
>> fine, and the logs are routinely deleted from the system in a particular
>> order as cron jobs.
>>
>> Please let me know.
>>
>> Thanking in advance,
>>
>> jm
>>
>
> So whats the problem?
>
>
> Amos
> --
> Please be using
> Current Stable Squid 2.7.STABLE6 or 3.0.STABLE13
> Current Beta Squid 3.1.0.5
>
Received on Wed Feb 25 2009 - 18:03:45 MST
This archive was generated by hypermail 2.2.0 : Thu Feb 26 2009 - 12:00:02 MST