RE: [squid-users] possible SOAP problem with 3.1.4

From: Alan Lehman <alehman_at_gbateam.com>
Date: Fri, 23 Jul 2010 13:57:45 -0500

>
CONFIDENTIALITY NOTICE: This e-mail message including attachments, if any, is intended for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. Thank you
-----Original Message-----
> From: Amos Jeffries [mailto:squid3_at_treenet.co.nz]
> Sent: Sunday, July 11, 2010 1:55 AM
> To: squid-users_at_squid-cache.org
> Subject: Re: [squid-users] possible SOAP problem with 3.1.4
>
> Alan Lehman wrote:
> > We have particular application software license server for our office
> > that is located behind a Squid proxy. It stopped working after
> upgrading
> > Squid from 3.1.0.17 to 3.1.4. This server periodically goes to the
> > software company's web site to verify the license is valid and upload
> > user counts, etc. It appears to be some sort of SOAP application. The
> > license server runs on a Windows server. From access.log:
> >
> > Running 3.1.0.17 (succeeds) -
> > 1278609155.802 470 172.16.4.43 TCP_MISS/200 725 POST
> > http://selectserver.bentley.com/bss/ws/Misc.asmx -
> DIRECT/64.90.235.78
> > text/xml
> > 1278609157.482 1054 172.16.4.43 TCP_MISS/200 117679 POST
> > http://selectserver.bentley.com/bss/ws/GatewayWS.asmx -
> > DIRECT/64.90.235.78 text/xml
> >
> > Running 3.1.4 (fails) -
> > 1278607986.223 1138 172.16.4.43 TCP_MISS/500 838 POST
> > http://selectserver.bentley.com/bss/ws/Misc.asmx -
> DIRECT/64.90.235.78
> > application/soap+xml
> > 1278607987.128 895 172.16.4.43 TCP_MISS/200 1178 POST
> > http://selectserver.bentley.com/bss/ws/Misc.asmx -
> DIRECT/64.90.235.78
> > text/xml
> >
> > I verified the situation by going back to 3.1.0.17 with the same
> config,
> > whereupon it started working again. I tried adding cache deny for
> this
> > domain but it didn't change anything.
> >
> > Any thoughts would be most appreciated.
> > Thanks,
> > Alan Lehman
>
> Don't know the problem.
> You are going to have to dig into the request/reply's a bit further to
> see what the problems is.
> The biggest difference between 3.1.0.17 and 3.1.4 is that HTTP/1.1 is
> sent to the server by 3.1.4. It may be doing some broken magic, as
> evidenced by the different response type given to Squid now.
>
> Amos
> --
> Please be using
> Current Stable Squid 2.7.STABLE9 or 3.1.5

So far I'm unable to determine a consistent pattern with Wireshark. Is there a way I can force 3.1.4 to use HTTP/1.0?

Alan
Received on Fri Jul 23 2010 - 18:58:08 MDT

This archive was generated by hypermail 2.2.0 : Sat Jul 24 2010 - 12:00:04 MDT