RE: [squid-users] Whats the differenne between sibling mode and pac file

From: Tóth Tibor Péter <tibor.peter.toth_at_mtv.hu>
Date: Thu, 29 Jul 2010 17:40:29 +0200

I am confused :)

Not sure, if I'm correct, but squid could be used in sibling mode. In this case there are two or more squid nodes communicating to each other, and somehow having a load ballance between each oter or so?

If I use a Pac file, I can set who should use Cache Node1,Cache Node2 in order, and who should try Cache node2, Cache node1 in order to have failover, and load ballance as well.

I dont know if I am correct on this?

What would happen if one employee is loggen into lets say to an Ebanking site to check his/her own account from work, and while he/she having an active session, one of the cache servers goes down.
In sibling mode do they replicate data between each other?
If I would use a Pac based configuration I am sure the conetent is not duplicated.

-----Original Message-----
From: Ralf Hildebrandt [mailto:Ralf.Hildebrandt_at_charite.de]
Sent: Thursday, July 29, 2010 5:30 PM
To: squid-users_at_squid-cache.org
Subject: Re: [squid-users] Whats the differenne between sibling mode and pac file

* Tóth Tibor Péter <tibor.peter.toth_at_mtv.hu>:
> Hi!
>
> What is the difference?
>
> Two cache servers in sibling mode,
> A pac file witch decides who should use CACHE1,CACHE2 and who should use CACHE2,CACHE1 in order?

I don't understand your question.

--
Ralf Hildebrandt
  Geschäftsbereich IT | Abteilung Netzwerk
  Charité - Universitätsmedizin Berlin
  Campus Benjamin Franklin
  Hindenburgdamm 30 | D-12203 Berlin
  Tel. +49 30 450 570 155 | Fax: +49 30 450 570 962
  ralf.hildebrandt@charite.de | http://www.charite.de
            
Received on Thu Jul 29 2010 - 15:41:39 MDT

This archive was generated by hypermail 2.2.0 : Thu Jul 29 2010 - 12:00:05 MDT