[squid-users] help needed on WCCP2 with squid 3.1.10

Hi,
I am following http://wiki.squid-cache.org/Features/Tproxy4 strictly
but failed to configure with CISCO router & WCCP2.

My setup as follow:

    Clients PCs>-----------------------------[Core
switch]-------->>-----------[Edge CISCO Router with
WCCP2]--------------->Internet
                                                 ||
                           [Squid 3.1.10 with Fedora 14, iptables, tproxy]

I can't configure Cisco router with following configuration as there
is no other interface there (only two, one connected with core
internal switch and rest with internet.
Please help me.
=============================
interface GigabitEthernet0/3.100
 description ADSL customers
 encapsulation dot1Q 502
 ip address x.x.x.x y.y.y.y
 ip wccp 80 redirect in
 ip wccp 90 redirect out

interface GigabitEthernet0/3.101
 description Dialup customers
 encapsulation dot1Q 502
 ip address x.x.x.x y.y.y.y
 ip wccp 80 redirect in
 ip wccp 90 redirect out

interface GigabitEthernet0/3.102
 description proxy servers
 encapsulation dot1Q 506
 ip address x.x.x.x y.y.y.y
 ip wccp redirect exclude in
=====================

Another question, how do check gre is configured at Linux?

BR,
Azhar Chowdhury
Received on Sat Apr 16 2011 - 17:14:16 MDT