Re: [squid-users] Squid fails loading pages, repeat 3 second disconnects shoutcast]]

From: Amos Jeffries <squid3_at_treenet.co.nz>
Date: Thu, 09 Feb 2012 10:08:33 +1300

On 09.02.2012 08:42, mgomon_at_glassnetworks.net wrote:
>> <b>OS: Ubuntu 11.04 Natty 64bit
>> Squid Cache: Version 2.7.STABLE9</b>
>>
>> I am running Squid through IE, Chrome and Firefox. Every page I load
>> either does not load all the way or fails to load at all. Also any
>> page no
>> matter the site that has flash content does not load the flash at
>> all. I
>> also tried Shoutcast through Winamp and every single time I start
>> the
>> stream... with in 3 seconds exactly... it stops.
>>
<snip>
> Upgraded to Squid3 3.1.11 Ubuntu Repo
>
> Got the basic setup going... Same issue with Shoutcast
>
> 2012/02/08 09:02:51.834| The request GET
> http://cp.internet-radio.org.uk:15701/ is ALLOWED, because it matched
> 'all'
> 2012/02/08 09:02:51.834| client_side_request.cc(547)
> clientAccessCheck2:
> No adapted_http_access configuration.
> 2012/02/08 09:02:51.835| The request GET
> http://cp.internet-radio.org.uk:15701/ is ALLOWED, because it matched
> 'all'
> 2012/02/08 09:02:52.259| ZPH: Preserving TOS on miss, TOS=0
> 2012/02/08 09:02:52.259| The reply for GET
> http://cp.internet-radio.org.uk:15701/ is ALLOWED, because it matched
> 'all'
> 2012/02/08 09:02:56.799| commHandleWrite: FD 29: write failure: (32)
> Broken pipe.
> 2012/02/08 09:02:56.799| connReadWasError: FD 29: got flag -1
> 2012/02/08 09:02:56.800| ConnStateData::swanSong: FD 29

Hmm, saying "write failure" this time, not just a "reset by peer".

Try checking for MTU, ECN or firewall issues with the Squid->client
part of connections.

Also, try a packet capture of that link and see what is going on there
at the TCP level.

Amos
Received on Wed Feb 08 2012 - 21:08:40 MST

This archive was generated by hypermail 2.2.0 : Thu Feb 09 2012 - 12:00:02 MST