Re: [squid-users] Performance tuning of SMP + Large rock

From: Alex Rousskov <rousskov_at_measurement-factory.com>
Date: Thu, 13 Feb 2014 13:19:31 -0700

On 02/12/2014 08:04 PM, Rajiv Desai wrote:
> Hi,
>
> I am using squid cache as a forward caching proxy.
>
> CONTEXT:
>
> For my use case since:
> 1. the average object size is ~80KB (moreover > 32KB),
> 2. the proxy server has multiple cores available
> 3. the throughput requirement is high (upto 1Gbps)
>
> I have configured squid to use SMP + LargeRock. I am using Squid
> Cache: Version 3.HEAD-20140127-r13248.
>
> I have configured the cache as:
>
> cache_dir rock /mnt/squid-cache 256000 max-size=4194304

All Squid imperfections aside, it is rather unlikely that your single
hard drive is fast enough to sustain disk loads implied by 1Gbps traffic
(your requirement #3). Most likely, you will need to limit disk traffic
(and, hence, sacrifice hit ratio) as discussed at the URL below.

> cache_mem 1024 MB
>
> with 4 workers:
> workers 4
>
> I am running squid on a VM with 8 vCPUs(reserved cpu) and 8 GB RAM
> (reserved). It does not seem to be bottlenecked by cpu or memory
> looking at vmstat output.
> I get a throughput of ~38MB/sec when all objects are read from cache
> (with 64 outstanding parallel HTTPS reads at all times and avg object
> size of 80 KB).

The first question you have to ask is: What is the bottleneck in your
environment? It sounds like you assume that it is the disk. Do you see
disk often utilized above 90%? If yes, you are probably right. See the
URL below for suggestions on how to measure and control disk utilization.

> QUESTIONS:
>
> 1. I am currently using a xfs mount for my cache_dir.
> /dev/sdc1 on /mnt/squid-cache type xfs
> (rw,noatime,nodiratime,nobarrier,logbufs=8)
>
> What is the recommended filesystem for storing LargeRock database?

The simpler it is, the higher is the probability that you will be able
to understand what is going on and tune your fs accordingly. Ext2?

> Also are there any recommended options that apply to LargeRock? (I
> looked through the FAQ and the recommendations there seem to be mainly
> for ufs/aufs/diskd which create many small files)
>
> 2. Are there any known throughput limits when using SMP + LargeRock?
>
> 3. Are there any recommending tuning options that specifically apply
> to LargeRock which would help cache read throughput?

Rock store performance tuning suggestions are available at
http://wiki.squid-cache.org/Features/RockStore

They apply to both Large Rock and Small Rock IIRC.

HTH,

Alex.
Received on Thu Feb 13 2014 - 20:19:37 MST

This archive was generated by hypermail 2.2.0 : Fri Feb 14 2014 - 12:00:04 MST