Re: [squid-users] Re: split the connexion using Squid

From: Nyamul Hassan <nyamul_at_gmail.com>
Date: Tue, 8 Jul 2014 20:24:18 +0600

Yemen, what router do you use for going to the internet? Regular
linux box? Or something else?

Regards
HASSAN

On Tue, Jul 8, 2014 at 8:18 PM, babajaga <augustus_meyer_at_yahoo.de> wrote:
> Not percentagewise, only in absolute values.
>
> I had problems myself to vaguely understand at least the doc about
> delay_pools, look into the documented squid.conf. So somebody else should
> answer your detailed questions, if any.
> However,
> I use it to put an upper limit of 125kbit/s download speed to every user
> having this simple config (squid2.7):
> .....
> delay_pools 1 #Just one pool
> delay_class 1 2 #class 2
> delay_access 1 allow all #everybody will be throttled; you might set up
> another pool allowing higher badwidth
> delay_parameters 1 -1/-1 125000/125000 #125kbit/s; no bursts. You might
> allow
> #delay_parameters 1 -1/-1 125000/250000 #... 250kbit/s burst rate, for
> initial page load
>
> which should be adequate for interactive browsing. As you have 6MBit WAN,
> this should also leave quite some spare bandwidth for non-proxied traffic,
> as not all of your 30 users will be hitting the <enter> button
> simultaneously to load another page.
>
>
>
>
> --
> View this message in context: http://squid-web-proxy-cache.1019090.n4.nabble.com/Re-split-the-connexion-using-Squid-tp4666739p4666745.html
> Sent from the Squid - Users mailing list archive at Nabble.com.
Received on Tue Jul 08 2014 - 14:25:04 MDT

This archive was generated by hypermail 2.2.0 : Tue Jul 08 2014 - 12:00:05 MDT