Squid configuration directive wccp2_return_method

Available in: v7   v6   v5   v4   3.5   3.4   3.3   3.2   2.7   3.1   3.0   2.6  

For older versions than v4 see the linked pages above

Configuration Details:

Option Name:wccp2_return_method
Replaces:
Requires:--enable-wccpv2
Default Value:wccp2_return_method gre
Suggested Config:

	WCCP2 allows the setting of return methods between the
	router/switch and the cache for packets that the cache
	decides not to handle.  Valid values are as follows:

	gre - GRE encapsulation (forward the packet in a GRE/WCCP tunnel)
	l2  - L2 redirect (forward the packet using Layer 2/MAC rewriting)

	Currently (as of IOS 12.4) cisco routers only support GRE.
	Cisco switches only support the L2 redirect assignment.

	If the "ip wccp redirect exclude in" command has been
	enabled on the cache interface, then it is still safe for
	the proxy server to use a l2 redirect method even if this
	option is set to GRE.

 

Back

 

Introduction

Documentation

Support

Miscellaneous

Web Site Translations

Mirrors