Re: Serious Problems using Squid - PLEASE HELP!

From: Dancer <dancer@dont-contact.us>
Date: Thu, 19 Feb 1998 01:20:31 +1000

Your data-segment limit is probably set too low. I _think_ it defaults to
32MB.

D

Phil Richardson wrote:

> Keywords: FreeBSD, Squid, xmalloc failure
>
> I seem to be having some serious run-time problems with Squid (vers
> 1.1.1). Im running it on a FreeBSD platform (2.2.5, 128Mb Ram, 8Gb
> scsi disk).
>
> Currently Im running with only 16 users (approx. 100,000 hits per
> day). Trouble is, squid crashes every-so often with a message;
> xmalloc - cannot allocate 4028 bytes
>
> Im bemused, I'v reduced the cache_mem parameter from 96 (which I
> though would be ok with 128Mb ram), down to 18. Still it crashes. I
> cant seem to get much info on whats going on - other than results
> from "top" - which show atypically before a self-distruct the
> following sort of parameters;
>
> >last pid: 2106; load averages: 0.05, 0.05, 0.02
> > 14:33:06 30 processes: 1 running, 28 sleeping, 1 stopped CPU
> >states: 2.3% user, 0.0% nice, 2.7% system, 1.6% interrupt, 93.4%
> >idle Mem: 73M Active, 1812K Inact, 21M Wired, 28M Cache, 8344K Buf,
> >616K Free Swap: 256M Total, 96K Used, 256M Free
> >
> > PID USERNAME PRI NICE SIZE RES STATE TIME WCPU CPU
> > COMMAND
> > 2084 root 2 0 32388K 32568K select 1:05 3.24% 3.24% squid
>
> I dont know if its a squid problem - or a FreeBSD problem. It's not
> clear to me what Wired and Cache memory are - other than as Free
> falls below 1M, cache slowly reduces. In any instance when the size
> of squid climbs to over 33000K it usually fails.
>
> Please - anybody out there running on FreeBSD with this sort of
> configuration - or anyone with any idea - please let me know!
>
> Regards
>
> Phil Richardson
> Network Services Manager
> Computing and Network Services
> University of Lincolnshire and Humberside
>
> Phil Richardson, Network Services Manager
> Computing and Network Services
> University of Lincolnshire & Humberside
>
> prichardson@humber.ac.uk
> Tel: 01482 463101 / Fax: 01482 440279

--
Did you read the documentation AND the FAQ?
If not, I'll probably still answer your question, but my patience will
be limited, and you take the risk of sarcasm and ridicule.
Received on Wed Feb 18 1998 - 07:30:50 MST

This archive was generated by hypermail pre-2.1.9 : Tue Dec 09 2003 - 16:38:55 MST