Re: [SQU] Select Loop Failed

From: Henrik Nordstrom <hno@dont-contact.us>
Date: Tue, 12 Sep 2000 21:37:25 +0200

What you describe is more likely a network driver issue. If there are
network driver problems then Squid will get into trouble as well, in
some cases with the mentioned error message.

Try switching to another network card model or brand.

Problems similar to this have been experienced on Linux with
   * 3com vortex cards
   * Intel EtherExpress 100
   * Tulip based cards (built in Compaq server card)

Of the three the tulip cards have been the most stable, but then I
haven't used the other two models in quite some time now (a year or so).

In some cases messages are logged in /var/log/messages, sometimes not.
In most cases it helps to stop the network, unload the driver module and
start the network again.

--
Henrik Nordstrom
Michael Baird wrote:
> 
> I'm currently testing 2.4.4Dev, w/no special compile options, no DISKD,
> I've had it running for a couple of weeks, and in the last 3 days, it
> seems to have killed my ethernet interface, with the error message of
> Select Loop Failed, this is written in the user.log, can someone tell me
> what generally causes select loop failed, I'm using linux kernel2.2.16,
> 512MBRam,4x20GB IDE, dual PII-500, 30GB cache, memory utilization looks
> fine, not going into swap, it reaches about 70request/sec.  It usually
> dies at peak request time also.
> 
> Regards
> MIKE
> 
> --
> To unsubscribe, see http://www.squid-cache.org/mailing-lists.html
--
To unsubscribe, see http://www.squid-cache.org/mailing-lists.html
Received on Tue Sep 12 2000 - 14:10:22 MDT

This archive was generated by hypermail pre-2.1.9 : Tue Dec 09 2003 - 16:55:16 MST