Re: [squid-users] Re: Satellite

By getting the Squid-2.5 development sources, and then apply the patch
by using the patch program. Don't expect any miracles thou as
a) A development version of Squid is required
b) The tosaddracl patch is not very much tested yet..

--
Henrik Nordtrom
Squid Hacker
Edward wrote:
> 
> How do I apply this?
> 
> Thank you very much.
> 
> Best regards,
> 
> Edward Millington
> (Network Administrator & Senior Technical Support Technician)
> Cariaccess Communications Ltd.
> Carlisle House
> Hincks Street
> Bridgetown
> Barbados
> 1-246-430-7435
> Fax : 1-246-431-0170
> www.cariaccess.com
> ----- Original Message -----
> From: "Henrik Nordstrom" <hno@hem.passagen.se>
> To: "Edward" <edward@cariaccess.com>
> Cc: "Squid Users" <squid-users@squid-cache.org>
> Sent: Thursday, April 26, 2001 3:51 AM
> Subject: Re: [squid-users] Re: Satellite
> 
> > Already told you how to tell Squid what IP to use for outgoing
> > connections. How you then route traffic from that IP is your problem,
> > not Squid's.
> >
> > And yes Squid is a proxy, which is an application to application gateway
> > running at level 7. Any requests made by Squid will be from the server
> > where Squid is running, not the client.
> >
> > If you need to have different outgoing IP's for different classes of
> > users then there is an unofficial patch to extend Squid with such
> > selections. See
> > http://squid.sourceforge.net/cgi-bin/diff/rvenning_tosaddracl
> >
> > (works with the Squid-2.5 snapshots I think)
> >
> > --
> > Henrik Nordstrom
> > Squid Hacker
> >
> >
> > Edward wrote:
> > >
> > > Hi Henrik!
> > >
> > > With squid enable using cisco route policy, the test IP which we are
> using
> > > will not route throught the SAT.
> > >
> > > Most probably, the squid is contacting the servers as a proxy with its
> IP
> > > address.
> > >
> > > How can I solve this problem?
> > >
> > > Thank you very much.
> > >
> > > Best regards,
> > >
> > > Edward Millington
> > > (Network Administrator & Senior Technical Support Technician)
> > > Cariaccess Communications Ltd.
> > > Bridgetown
> > > Barbados
> > > 1-246-430-7435
> > > Fax : 1-246-431-0170
> > > edward@cariaccess.com
> > > www.cariaccess.com
> > > ----- Original Message -----
> > > From: "Henrik Nordstrom" <hno@hem.passagen.se>
> > > To: "Edward" <edward@cariaccess.com>
> > > Sent: Wednesday, April 25, 2001 5:54 PM
> > > Subject: Re: Satellite
> > >
> > > > What you have in Squid is tcp_outgoing_address. Might work four you.
> > > >
> > > > And please address questions to squid-users (not privately), and only
> > > > one copy of the same question per week.
> > > >
> > > >
> > > > Edward wrote:
> > > > >
> > > > > Hi there!
> > > > >
> > > > > I am running squid 2.4 Stable 1 on Redhat 7.0 Kernel 2.2.17.
> > > > >
> > > > > We are an ISP
> > > > >
> > > > > We have 2 Class C's. one for our net work and one for our dial up
> > > customers.
> > > > >
> > > > > We want to use the 1 of those class C for Satellite routing.
> > > > >
> > > > > Ie. The class C for our dialup will go throught our telecom provider
> and
> > > > > routed back through the SAT for downloading.
> > > > >
> > > > > Do I have to configure squid to let the client use the bandwidht on
> the
> > > sat
> > > > > instead of using out telecom provider bandwidth?
> > > > >
> > > > > In other words, squid my download throught the SAT for dialup
> customers.
> > > > >
> > > > > Thank you very much.
> > > > >
> > > > > Best regards,
> > > > >
> > > > > Edward Millington
> > > > > (Network Administrator & Senior Technical Support Technician)
> > > > > Cariaccess Communications Ltd.
> > > > > Carlisle House
> > > > > Hincks Street
> > > > > Bridgetown
> > > > > Barbados
> > > > > 1-246-430-7435
> > > > > Fax : 1-246-431-0170
> > > > > www.cariaccess.com
> > > >
> >
> >