Re: [squid-users] Telnet Sessions Disconnect

Thanks Stefan for the suggestion. I'll try this and get back to you. How come I cant email at your email address.

Charanbeer.
  ----- Original Message -----
  From: Löger, Stefan
  To: 'Charanbeer'
  Sent: Friday, May 25, 2001 3:05 PM
  Subject: AW: [squid-users] Telnet Sessions Disconnect

  yes, you have to add:
   
  1. Allow from internal + back
  2. Masq
  3. Allow outgoing + back
   
  /sbin/ipchains -A input -p tcp -s 191.168.1.0/24 23 -j ACCEPT
  /sbin/ipchains -A output -p tcp -s 192.168.1.0/24 23 -j ACCEPT
   
  Port 23 for Telnet
   
  Pardon, but I don´t know the right Syntax for Ipchains, because I use BSD with ipfw....
   
  mfg
   
  Stefan
    -----Ursprüngliche Nachricht-----
    Von: Charanbeer [mailto:charanbeer.s@net4india.net]
    Gesendet: Freitag, 25. Mai 2001 11:21
    An: Squid
    Betreff: Re: [squid-users] Telnet Sessions Disconnect

    Hi Loger

    Yes it is the gateway for my network as well. Tell me if I should add anything for telnet in my firewall script.

    Charanbeer.
      ----- Original Message -----
      From: Löger, Stefan
      To: 'Charanbeer'
      Sent: Friday, May 25, 2001 2:35 PM
      Subject: AW: [squid-users] Telnet Sessions Disconnect

      There is no entry for Telnet in your firewall script?!? Is your ProxyServer the Gateway for your Network or only the Proxy Server?? If it´s not the Gateway for your Network an entry in the firewall script didn´t effect to your Problem...
        -----Ursprüngliche Nachricht-----
        Von: Charanbeer [mailto:charanbeer.s@net4india.net]
        Gesendet: Freitag, 25. Mai 2001 10:52
        An: Squid
        Betreff: Re: [squid-users] Telnet Sessions Disconnect

        This is my ipchains file which executes at the startup Do I need to add anything in to it to enable it:

        /sbin/ipchains -A input -p tcp -s 192.168.1.0/24 -d 0/0 80 -j REDIRECT 8080
        /sbin/ifconfig eth0:0 192.168.1.1
        /sbin/ipchains -A forward -s 192.168.1.0/24 -j MASQ
        /sbin/ipchains -A input -p tcp -s 192.168.1.0/24 ftp -j ACCEPT
        /sbin/ipchains -A input -p tcp -s 191.168.1.0/24 ftp-data -j ACCEPT
        /sbin/ipchains -A output -p tcp -s 192.168.1.0/24 ftp-data -j ACCEPT
        /sbin/insmod ip_masq_ftp

        Charanbeer.
          ----- Original Message -----
          From: Löger, Stefan
          To: 'Charanbeer' ; Squid
          Sent: Friday, May 25, 2001 1:07 PM
          Subject: AW: [squid-users] Telnet Sessions Disconnect

          Squid is NOT a Telnet Proxy, only Http, Ftp und SSL tunneling!!
            -----Ursprüngliche Nachricht-----
            Von: Charanbeer [mailto:charanbeer.s@net4india.net]
            Gesendet: Freitag, 25. Mai 2001 09:35
            An: Squid
            Betreff: [squid-users] Telnet Sessions Disconnect

            Hi All

            I am running Squid 2.3 on Red Hat 6.1 with the deafult squid.conf serving 40odd win95/98 clients.My squid machine is PIII 550 MHz
            with 10gb HDD and 128MB RAM (256MB of swap space) These clients use telnet a lot and their telnet sessions tend to disconnect after every few minutes whereas if they go directly(i.e. without using proxy) they dont face any such problem.

            Is there anything in squid.conf which defines the idle time after which the client's telnet session is disconnected. Any suggestions on this would be a great help.

            Thanks in advance
            Charanbeer.
Received on Fri May 25 2001 - 03:48:01 MDT