Re: [squid-users] Access Lists

No. A acl name can only be of a single type.

And even if the below was possible, it would not be the same thing as it
then would allow access to domains having the string "adams" OR from
10.9.1.112.

Regards
Henrik Nordström
Squid Hacker

Paul Harlow wrote:
>
> So with this in mind could I do the following:
>
> acl jkane src 10.9.1.112/255.255.255.255
> acl jkane dstdom_regex adams
> http_access allow jkane
>
> Instead? Simpler and from what you've stated, if I understand correctly,
> this would do the same thing. Correct?
>
> -----Original Message-----
> From: Henrik Nordstrom [mailto:hno@squid-cache.org]
> Sent: Wednesday, October 31, 2001 10:52 AM
> To: Paul Harlow
> Cc: Squid Users (E-mail)
> Subject: Re: [squid-users] Access Lists
>
> Paul Harlow wrote:
>
> > acl jkanepc src 10.9.1.112/255.255.255.255
> > This one allows "jkanepc" with a source address of 10.9.1.112...
>
> Not quite. It defines the acl list "jkanepc" that can later be used to
> allow/deny access in http_access.
>
> > acl jkane dstdom_regex adams
> > I'm assuming that the access list name is "jkane" and that this will read
> > anything with the name "adams" in the address field.
>
> Exacly.
>
> > http_access allow jkane jkanepc
> > Finally, this ties the two together if I'm not mistaken. It ties the list
> > "jkane" with the "jkanepc" address, correct?
>
> Sort of.
>
> To be specific it allows the request if it matches both the "jkane" and
> "jkanepc" acl lists.
>
> Regards
> Henrik Nordström
Received on Wed Oct 31 2001 - 14:24:49 MST