Re: [squid-users] Failure Ratio at x.xx?

That the ratio of HTTP errors seen by Squid is way too high so Squid
assumes there must be a problem of some kind and stops responding to ICP
misses to make siblings select another parent if they can.

See access.log if you can find any hint there as to what is failing and
why. Also, verify that your Squid can proxy requests.

Regards
Henrik

Mike Diggins wrote:
>
> I'm running Squid 2.4Stable7 on a Sun Ultra 10 running Solaris 8 and these
> messages began showing up in my cache log just recently. I restarted the
> server this morning (for other reasons, I hadn't yet noticed this message)
> and they seem to be gone. Anyone know what it means?
>
> 2002/11/24 05:34:01| Failure Ratio at 1.82
> 2002/11/24 05:34:01| Going into hit-only-mode for 5 minutes...
> 2002/11/24 05:39:04| Failure Ratio at 2.12
> 2002/11/24 05:39:04| Going into hit-only-mode for 5 minutes...
> 2002/11/24 05:44:08| Failure Ratio at 2.12
> 2002/11/24 05:44:08| Going into hit-only-mode for 5 minutes...
> 2002/11/24 05:49:09| Failure Ratio at 2.23
> 2002/11/24 05:49:09| Going into hit-only-mode for 5 minutes...
> 2002/11/24 05:54:16| Failure Ratio at 2.04
> 2002/11/24 05:54:16| Going into hit-only-mode for 5 minutes...
> 2002/11/24 05:59:21| Failure Ratio at 2.01
> 2002/11/24 05:59:21| Going into hit-only-mode for 5 minutes...
> 2002/11/24 06:04:23| Failure Ratio at 1.94
> 2002/11/24 06:04:23| Going into hit-only-mode for 5 minutes...
> 2002/11/24 06:09:27| Failure Ratio at 1.75
>
> -Mike
Received on Mon Nov 25 2002 - 01:02:56 MST