AW: [squid-users] Problem with SQUID+ WCCP v2 + Cisco Router

From: Frederic Jachiet <frederic.jachiet@dont-contact.us>
Date: Wed, 22 Jan 2003 19:31:58 +0100

Hi

Does anyone knows how far does the squid 2.5 support the wccp2 protocol.

Does it support several Squid with several routers ?

Best regards,

Fred
-----Ursprüngliche Nachricht-----
Von: hare ram [mailto:hareram@sol.net.in]
Gesendet: samedi, 18. janvier 2003 10:18
An: Jack
Cc: squid-users@squid-cache.org
Betreff: Re: [squid-users] Problem with SQUID+ WCCP v2 + Cisco Router

hi

send me you config info like
distro, Cisco router IOS Version
are u trying to do with WCCPv2

if yes what are the errors you are getting

hare
----- Original Message -----
From: "Jack" <sa_jill@yahoo.co.uk>
To: "hare ram" <hareram@sol.net.in>; <squid-users@squid-cache.org>
Sent: Saturday, January 18, 2003 12:16 AM
Subject: Re: [squid-users] Problem with SQUID+ WCCP v2 + Cisco Router

> Hello Ram,
>
> Can you share your router and linux kernel configurtaion so that it
will
be
> helpfull for me.
>
> I am facing same problem here.
> I enabled ip_wccp in kernel as modules Should it be in-build with
kernel?
>
> Regards,
> Jack
>
>
> > Hi all
> >
> > thanks to all helping me for this problem
> >
> > i have resolved the problem and kept squid under production
> >
> > thanks again for all
> > hare
> > ----- Original Message -----
> > From: "MASOOD AHMAD" <masoodnt10@yahoo.com>
> > To: "hare ram" <hareram@sol.net.in>
> > Cc: <squid-users@squid-cache.org>
> > Sent: Monday, January 13, 2003 12:41 PM
> > Subject: Re: [squid-users] Problem with SQUID+ WCCP v2 + Cisco
Router
> >
> >
> > > this is again magic is gateway directly Squid machine
> > > then no need to run WCCP on router because then it
> > > will create loop :) so I'm not able to understand for
> > > what purpose these peoples running WCCP may be there
> > > is another WCCP :):)
> > >
> > > Best Regards,
> > > Masood Ahmad Shah
> > > System Administrator
> > > Fibre Net
> > >
> > > --- hare ram <hareram@sol.net.in> wrote:
> > > > Hi
> > > >
> > > > Looks Like Some Magic running on your network
> > > > there is not technology till now, with out
> > > > redirection wccp will route the
> > > > packets
> > > >
> > > > show you post your
> > > > show run from cisco
> > > >
> > > > or you might have kept your gateway directly to
> > > > SQUID box
> > > >
> > > > check again
> > > >
> > > > Regards
> > > > hare
> > > > ----- Original Message -----
> > > > From: "Farrukh Mahmood"
> > > > <farrukh_mahmood@eworld.net.pk>
> > > > To: <squid-users@squid-cache.org>
> > > > Cc: <masoodnt10@yahoo.com>
> > > > Sent: Sunday, January 12, 2003 4:53 PM
> > > > Subject: Re: [squid-users] Problem with SQUID+ WCCP
> > > > v2 + Cisco Router
> > > >
> > > >
> > > > > Dear Masood
> > > > >
> > > > >
> > > > > i m running it with out any redirection with wccp
> > > > v1 and its working
> > > > > fine
> > > > >
> > > > >
> > > > > Regards
> > > > > Farrukh Mahmood
> > > > > ----- Original Message -----
> > > > > From: MASOOD AHMAD <masoodnt10@yahoo.com>
> > > > > Date: Saturday, January 11, 2003 11:49 am
> > > > > Subject: Re: [squid-users] Problem with SQUID+
> > > > WCCP v2 + Cisco Router
> > > > >
> > > > > > Dear Farrukh,
> > > > > >
> > > > > > we will have put ip wccp redirection on router
> > > > > > interface other wise it will not redirect port
> > > > 80
> > > > > > packet to caches........ try to study it on
> > > > > >
> > > > > >
> > > >
> > >
http://www.cisco.com/warp/public/732/Tech/switching/wccp/index.shtml
> > > > > >
> > > > > > Best Regards,
> > > > > > Masood Ahmad Shah
> > > > > > System Administrator
> > > > > > Fibre Net
> > > > > >
> > > > > > --- Farrukh Mahmood
> > > > <farrukh_mahmood@eworld.net.pk>
> > > > > > wrote:
> > > > > > > hi
> > > > > > >
> > > > > > > if its wccp why should we have to redirect it
> > > > from
> > > > > > > router cause wccp
> > > > > > > itself say that "i m here" and broadcast this
> > > > > > > message to network when
> > > > > > > he got reply from router from network its
> > > > shown in
> > > > > > > router by this
> > > > > > > command "sh ip wccp web cache detail" we never
> > > > do
> > > > > > > any thing for
> > > > > > > redirection on router if wccp is running , and
> > > > > > > according to my
> > > > > > > knowledge there are no configuration for squid
> > > > on
> > > > > > > wccp2 but i works
> > > > > > > fine on wccp1 and u can find this
> > > > configuration on
> > > > > > > squid site.
> > > > > > >
> > > > > > >
> > > > > > > Regards
> > > > > > > Farrukh Mahmood
> > > > > > >
> > > > > > > ----- Original Message -----
> > > > > > > From: MASOOD AHMAD <masoodnt10@yahoo.com>
> > > > > > > Date: Friday, January 10, 2003 5:53 pm
> > > > > > > Subject: Re: [squid-users] Problem with
> > > > SQUID+ WCCP
> > > > > > > v2 + Cisco Router
> > > > > > >
> > > > > > > > your wccp seems to be working fine try to
> > > > put
> > > > > > > redirect
> > > > > > > > out on router external interface it can be
> > > > serail
> > > > > > > > instead fast ethernet 0/0 it will work...
> > > > > > > >
> > > > > > > > Best Regards,
> > > > > > > > Masood Ahmad Shah
> > > > > > > > System Administrator
> > > > > > > > Fibre Net
> > > > > > > >
> > > > > > > > --- hare ram <hareram@sol.net.in> wrote:
> > > > > > > > > any coments on this problem
> > > > > > > > >
> > > > > > > > > thanks
> > > > > > > > > hare
> > > > > > > > > ----- Original Message -----
> > > > > > > > > From: "hare ram" <hareram@sol.net.in>
> > > > > > > > > To: <squid-users@squid-cache.org>
> > > > > > > > > Sent: Friday, January 10, 2003 2:03 PM
> > > > > > > > > Subject: [squid-users] Problem with SQUID+
> > > > WCCP
> > > > > > > v2 +
> > > > > > > > > Cisco Router
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > > Hi all
> > > > > > > > > >
> > > > > > > > > > i am trying to deploy squid 2.5 version
> > > > +
> > > > > > > WCCP v2
> > > > > > > > > + cisco Router
> > > > > > > > > >
> > > > > > > > > > but i could not able to success
> > > > > > > > > >
> > > > > > > > > > my proxy running with transparent,
> > > > tested
> > > > > > > working
> > > > > > > > > fine
> > > > > > > > > > but when i divert the traffic from cisco
> > > > > > > router
> > > > > > > > > using wccp, i could not =
> > > > > > > > > > able to see any traffic going via my
> > > > cache
> > > > > > > server
> > > > > > > > > >
> > > > > > > > > > but iam able to see lot of redirect
> > > > packets
> > > > > > > from
> > > > > > > > > cisco
> > > > > > > > > >
> > > > > > > > > > any suggestion will be appriciated
> > > > > > > > > >
> > > > > > > > > > ###########my setup
> > > > > > > > > >
> > > > > > > > > > Redhat 8.0 with 2.4.18-19.8 kernal
> > > > > > > > > > patched kernal with iptables 1.2.7 with
> > > > > > > Visolve
> > > > > > > > > WCCP v2 Patch to kernal
> > > > > > > > > > patched latest squid ver 2.5 also with
> > > > the
> > > > > > > > > recomended patch give from =
> > > > > > > > > > this URL
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > >
> > > http://squid.visolve.com/developments/wccpv2_install.htm
> > > > > > > > > >
> > > > > > > > > > ###########My cisco config Looks Like
> > > > this
> > > > > > > > > >
> > > > > > > > > > !
> > > > > > > > > > ip subnet-zero
> > > > > > > > > > no ip source-route
> > > > > > > > > > ip wccp web-cache
> > > > > > > > > > !
> > > > > > > > > > !
> > > > > > > > > > ip name-server z.z.z.z
> > > > > > > > > > !
> > > > > > > > > > no ip bootp server
> > > > > > > > > > call rsvp-sync
> > > > > > > > > > !
> > > > > > > > > > !
> > > > > > > > > > !
> > > > > > > > > > !
> > > > > > > > > > !
> > > > > > > > > > interface FastEthernet0/0
> > > > > > > > > > ip wccp webcache redirect out
> > > > > > > > > > ip address y.y.y.y y.y.y.y
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > ###########GATEWAY#show ip wccp
> > > > web-cache
> > > > > > > detail
> > > > > > > > > > WCCP Cache-Engine information:
> > > > > > > > > > IP Address: x.x.x.x (
> > > > ip
> > > > > > > > > address of cache Server)
> > > > > > > > > > Protocol Version: 2.0
> > > > > > > > > > State: Usable
> > > > > > > > > > Initial Hash Info:
> > > > > > > > > 00000000000000000000000000000000
> > > > > > > > > >
> > > >
> > > === message truncated ===
> > >
> > >
> > > __________________________________________________
> > > Do you Yahoo!?
> > > Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
> > > http://mailplus.yahoo.com
> > >
>
> __________________________________________________
> Do You Yahoo!?
> Everything you'll ever need on one web page
> from News and Sport to Email and Music Charts
> http://uk.my.yahoo.com
>
Received on Wed Jan 22 2003 - 11:27:19 MST

This archive was generated by hypermail pre-2.1.9 : Tue Dec 09 2003 - 17:12:47 MST